Lexus ES300h 2014 Navigation Manual

70
1. DESTINATION SEARCH
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Press the “MENU” button on the
Remote Touch. (See “Remote Touch”
on page 10.)
2Select “Destination” on the “Menu”
screen.
3Select “Address” on the “Destination”
screen.
4Select the desired search method.
1Press the “MENU” button on the
Remote Touch, then select
“Destination”.
2Select “Address” on the “Destination”
screen.
3Select “City”.
4Input a city name.
5Select the screen button of the desired
city name from the displayed list.
INFORMATION
●
If a preset destination point has not been
registered, a message confirming if it is
desirable to set a preset destination will
be displayed, and the setting screen will
appear.
●Guidance starts from the current position
to the preset destination point if “OK” is
selected even while driving.
DESTINATION SEARCH BY
“Address”
There are 2 methods to search a desti-
nation by address:
(a) Search by city
(b) Search by street address
SELECTING A CITY TO
SEARCH

71
1. DESTINATION SEARCH
3
NAVIGATION SYSTEM
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
6Input the street name and select “OK”.
7When the desired street name is found,
select the correspondi ng screen button.
zWhen the desired street name is selected,
the “Confirm Destination” screen may be
displayed. If “Go” is selected on the “Con-
firm Destination” screen, the navigation
system performs a search for the route.
(See “STARTING ROUTE GUIDANCE”
on page 87.)
8Input a house number.
z If the same address exists in more than 1
city, the current screen changes to the
address list screen.
■ SEARCHING FROM THE LAST 5
CITIES
1Select “Last 5 Cities” .
2Select the screen button of the desired
city name from the displayed list.
zThe current screen changes to the
screen for inputting a street name. (See
“SELECTING A CITY TO SEARCH” on
page 70.)
INFORMATION
●
If the navigation system has never been
used, this function will not be available.

72
1. DESTINATION SEARCH
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Press the “MENU” button on the
Remote Touch, then select
“Destination” .
2Select “Address” on the “Destination”
screen.
3Select “Street Address” .
4Select numbers directly on the screen to
input the house number.
zAfter inputting the house number, select
“OK” to display the screen for inputting the
street name.
5Input the street name and select “OK”.
6When the desired street name is found,
select the corresponding screen button.
zWhen the desired street name is selected,
the “Confirm Destination” screen may be
displayed. If “Go” is selected on the “Con-
firm Destination” screen, the navigation
system performs a search for the route.
(See “STARTING ROUTE GUIDANCE”
on page 87.)
z If the same address exists in more than 1
city, a screen requesting the city name to be
input or selected will be displayed.
7Input a city name.
8Select the screen button of the desired
city name from the displayed list.
SEARCH BY STREET ADDRESS

73
1. DESTINATION SEARCH
3
NAVIGATION SYSTEM
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Press the “MENU” button on the
Remote Touch. (See “Remote Touch”
on page 10.)
2Select “Destination” on the “Menu”
screen.
3Select “Point of Interest” on the “Desti-
nation” screen.
4Select the desired search method.
1Press the “MENU” button on the
Remote Touch, then select
“Destination” .
2Select “Point of Interest” on the “Desti-
nation” screen.
3Select “Name” on the “Point of Interest”
screen.
4Input the name of the POI.
5Select the screen button of the desired
destination.
z When the desired dest ination is selected,
the “Confirm Destination” screen may be
displayed. If “Go” is selected on the “Con-
firm Destination” screen, the navigation
system performs a search for the route.
(See “STARTING ROUTE GUIDANCE”
on page 87.)
z When inputting the name of a specific POI,
and there are 2 or more sites with the same
name, the list screen is displayed.
INFORMATION
●
A street name can be searched using
only the body part of its name.
●For example: S WESTERN AVE
• A search can be performed by inputting “S WESTERN AVE”, “WESTERN AVE”
or “WESTERN”.
DESTINATION SEARCH BY
“Point of Interest”
There are 4 methods to search a desti-
nation by Points of Interest:
(a) Search by name
(b) Search by category
(c) Search by phone #
(d) Search by eDestination
SEARCH BY “Name”

74
1. DESTINATION SEARCH
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
6Select the screen button of the desired
destination.
zIf the same name exists in more than 1 city, a
search can be performed more easily using
“City” or “Category” . (See “SELECTING
A CITY TO SEARCH” on page 74 and
“SELECTING FROM THE CATEGO-
RIES” on page 75.)
■ SELECTING A CITY TO SEARCH
1Select “City”.
2Input the city name.
zTo cancel the city setting, select “A n y C i t y ”.
3Select the screen button of the desired
city name from the displayed list.
zThe desired POI can be displayed on the
map screen. (See “DISPLAY POI
ICONS” on page 104.)
INFORMATION
●
To search for a facility name using multi-
ple search words, put a space between
each word.

75
1. DESTINATION SEARCH
3
NAVIGATION SYSTEM
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
■SELECTING FROM THE CATEGO-
RIES
1Select “Category” .
2Select the screen button of the desired
category.
zIf the desired POI category is on the
screen, select its screen button to display a
detailed list of the POI category.
z If the desired POI category is not on the
screen, select “List All Categories” to list
all POI categories.
z When the desired category is selected, the
POI name list screen is displayed.
1Press the “MENU” button on the
Remote Touch, then select
“Destination” .
2Select “Point of Interest” on the “Desti-
nation” screen.
3Select “Category” .
4This screen is displayed.
SEARCH BY “Category”
The destination can be set by selecting
the search point an d the POI category.

76
1. DESTINATION SEARCH
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
zOn this screen, the following operations
can be performed:
■ SETTING THE SEARCH POINT
FROM NEAR HERE
1Select “Near Here”.
zThe search point is set at the current posi-
tion, and the “POI Category” screen will be
displayed. (See page 78.)
■ SETTING THE SEARCH POINT
FROM ALONG MY ROUTE
1Select “A l o n g M y R o u t e ” .
zThe search point is set and the “POI Cate-
gory” screen will be displayed. (See page
78.)
■ SETTING THE SEARCH POINT
FROM NEAR CITY CENTER
1Select “Near a City Center in XX*”.
2Input the city center name.
3Select the screen button of the desired
city center name.
zThe search point is set and the “POI Cate-
gory” screen will be displayed. (See page
78.)
*: XX represents the selected search area
name.
No.Function
Select to set the search point from
near the current position.
Select to set the search point from
along the selected route.
Select to set the search point from
near a city center.
Select to set the search point from
near a destination.
INFORMATION
●
The names of POIs located within
approximately 200 miles (320 km) from
the selected search point can be dis-
played.

77
1. DESTINATION SEARCH
3
NAVIGATION SYSTEM
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
■SELECTING FROM THE LAST 5
CITIES
1Select “Near a City Center in XX*” .
2Select “Last 5 Cities” .
3Select the screen button of the desired
city center name.
zThe search point is set and the “POI Cate-
gory” screen will be displayed. (See page
78.)
*: XX represents the selected search area
name.
■ SETTING THE SEARCH POINT
FROM NEAR A DESTINATION
1Select “Near a Destination” .
2Select the screen button of the desired
destination.
zThe search point is set and the “POI Cate-
gory” screen will be displayed. (See page
78.)

78
1. DESTINATION SEARCH
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
■TO SEARCH FOR POIs NEAR THE
SEARCH POINT
1Select the desired POI category.
zIf the desired POI category is not on the
screen, select “List All Categories” to list
all POI categories.
z If “Favorite POI Categories” is selected, a
search can be performed using the 6 POIs
that have been previously set. For more
details, see “POI CATEGORY CHANGE
(SELECT POI ICONS)” on page 129.
2Select the desired POI category from
the list.
3Select the screen button of the desired
item.
z When the desired item is selected, the
“Confirm Destination” screen may be dis-
played. If “Go” is selected on the “Confirm
Destination” screen, the navigation system
performs a search for the route. (See
“STARTING ROUTE GUIDANCE” on
page 87.)
When the search point is set, the “POI
Category” screen will be displayed.

79
1. DESTINATION SEARCH
3
NAVIGATION SYSTEM
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Press the “MENU” button on the
Remote Touch, then select
“Destination” .
2Select “Point of Interest” on the “Desti-
nation” screen.
3Select “Phone #” on the “Point of Inter-
est” screen.
4Input a phone number.
5After inputting a phone number, select
“OK” .
zWhen a phone number is input, the “Con-
firm Destination” screen may be displayed.
If “Go” is selected on the “Confirm Desti-
nation” screen, the navigation system per-
forms a search for the route. (See
“STARTING ROUTE GUIDANCE” on
page 87.)
z If there is more than 1 site with the same
number, the following screen will be dis-
played.
1Press the “MENU” button on the
Remote Touch, then select
“Destination” .
2Select “Point of Interest” on the “Desti-
nation” screen.
3Select “eDestination” on the “Point of
Interest” screen.
z With the eDestination feature, you can go
online, via the Lexus.com owner’s Web site,
to select and organize destinations of your
choice and then wirelessly send them to
your vehicle’s navigation system. Up to
200 locations can be stored online and
accessed or updated at any time. Locations
can be organized into up to 20 folders.
(See “eDestination” on page 367.)
SEARCH BY “Phone #”zTo set an address book entry as a desti-
nation using the phone number, the num-
ber must already be registered with the
address book entry. (See page 118.)
INFORMATION
●
If there is no match for the phone number
input, a list of identical numbers with dif-
ferent area codes will be displayed.
SEARCH BY “eDestination”