LEXUS RX350 2011 Owners Manual

371
3-4. Using the hands-free phone system (for mobile phones)
3

Interior features
“Setup”
“Security”
“Set PIN”Setting a PIN code
“Phbk Lock”Locking the phone book
“Phbk Unlock”Unlocking the phone book
“Phone
Setup”
“Pair Phone”Registering the mobile phone
to be used
“Connect”Selecting a mobile phone to be
used
“Change Name”Changing a registered name of
a mobile phone
“List Phones”Listing the registered mobile
phones
“Set Passkey”Changing the passkey
“Delete Phone”Deleting a registered mobile
phone
“System
Setup”
“Guidance Vol”Setting voice guidance volume
“Device Name”Displaying the Bluetooth®
device address and name
“Initialize”Initializing the system
First menuSecond
menuThird menuOperation detail

372
3-4. Using the hands-free phone system (for mobile phones)
nUsing a short cut key
First menuSecond menuOperation detail
“Dial XXX (name)”-Dialing a name registered in the
phone book
“Phone book add
Entry”-Adding a new phone number
“Phone book Change
name”-Changing a registered name in
the phone book
“Phone book Delete
Entry”-Deleting the registered data
“Phone book List
names”-Listing the registered data
“Phone book Set
Speed Dial”-Setting speed dials
“Phone book Delete
Speed Dial”-Deleting speed dials
“Dial XXX (number)”-Dialing by inputting a number
“Phonebook”“Phonebook Unlock”Unlocking the phone book
“Phonebook Lock”Locking the phone book

373
3-4. Using the hands-free phone system (for mobile phones)
3

Interior features
nAutomatic volume adjustment
When vehicle speed reaches 50 mph (80 km/h) or more, the volume automati-
cally increases. The volume returns to the previous volume setting when vehicle
speed drops to 43 mph (70 km/h) or less.
nWhen using a voice command
For numbers, say a combination of single digits from zero to nine, # (pound),
∗ (star), and + (plus).
Say the command correctly and clearly.
nSituations that the system may not recognize your voice
lWhen driving on rough roads
lWhen driving at high speeds
lWhen air is blowing out of the vents onto the microphone
lWhen the air conditioning fan emits a loud noise
nOperations that cannot be performed while driving
lOperating the system with
lRegistering a mobile phone to the system
nChanging the passkey
→P. 3 8 2

374
3-4. Using the hands-free phone system (for mobile phones)
Making a phone call
nMaking a phone call
lDialing by inputting a number
“Dial by number”
lDialing by inputting a name
“Dial by name”
lSpeed dialing
lDialing a number stored in the outgoing history memory
“Redial”
lDialing a number stored in the incoming history memory
“Call back”
nReceiving a phone call
lAnswering the phone
lRefusing the call
nTransferring a call
nCall waiting
nUsing the call history memory
lDialing
lStoring number in the phone book
lDeleting

375
3-4. Using the hands-free phone system (for mobile phones)
3

Interior features
Dialing by inputting a number
Press the talk switch and say “Dial by number”.
Press the talk switch and say the phone number.
Dial by one of the following methods:
a. Press the off-hook switch.
b. Press the talk switch and say “Dial”.
c. Select “Dial” using .
Dialing by inputting a name
Press the talk switch and say “Dial by name”.
Select a registered name to be input by either of the following
methods:
a. Press the talk switch and say a registered name.
b. Press the talk switch and say “List Names”. Press the talk switch
when the desired name is read aloud.
Dial by one of the following methods:
a. Press the off-hook switch.
b. Press the talk switch and say “Dial”.
c. Select “Dial” using .
Speed dialing
Press the off-hook switch.
Press the preset button in which the desired number is registered.
Press the off-hook switch.
STEP1
STEP2
STEP3
STEP1
STEP2
STEP3
STEP1
STEP2
STEP3

376
3-4. Using the hands-free phone system (for mobile phones)
When receiving a phone call
nAnswering the phone
Press the off-hook switch.
nRefusing the call
Press the on-hook switch.
Transferring a call
A call can be transferred between the mobile phone and system while
dialing, receiving a call, or during a call. Use one of the following meth-
ods:
a. Operate the mobile phone.
Refer to the manual that comes with the mobile phone for the operation
of the phone.
b. Press the off-hook switch*1.
c. Press the talk switch and say “Call Transfer”*2.
*1: This operation can be performed only when transferring a call
from the mobile phone to the system during a call.
*2: While the vehicle is in motion, calls cannot be transferred from
the system to the mobile phone.
Call waiting
When a call is interrupted by an incoming call from a third party, the fol-
lowing options will become available:
lAnswer the incoming call: Press the off-hook switch. (Press the off-
hook switch again as necessary to switch back and forth between
calls.)
lRefuse the incoming call: Press the on-hook switch.

377
3-4. Using the hands-free phone system (for mobile phones)
3

Interior features
Using the call history memory
Follow the procedure below to use a number stored in the call history
memory:
Press the talk switch and say “Redial” (when using a number
stored in the outgoing call history memory) or “Call back” (when
using a number stored in the incoming call history memory).
Select the number by either of the following methods:
a. Say “Previous” or “Go back” until the desired number is dis-
played.
b. Select the desired number using .
The following operations can be performed:
Dialing: Press the off-hook switch or select “Dial” using a voice com-
mand or .
Storing the number in the phone book: Select “Store” and then
“Confirm” using a voice command or .
Deleting: Select “Delete” and then “Confirm” using a voice command
or .
STEP1
STEP2
STEP3

378
3-4. Using the hands-free phone system (for mobile phones)
nCall waiting
lIf your phone does not support HFP Ver. 1.5, this function cannot be used.
lCall waiting operation may differ depending on your mobile phone and service
provider.
nCall history
Up to 5 numbers can be stored in each of the outgoing and incoming call history
memories.
nWhen talking on the phone
lDo not talk simultaneously with the other party.
lKeep the volume of the received voice down. Otherwise, voice echo will
increase.

379
3-4. Using the hands-free phone system (for mobile phones)
3

Interior features
Setting a mobile phone
Registering a mobile phone in the hands-free phone system allows the sys-
tem to function. The following functions can be used for registered mobile
phones:
nFunctions and operation procedures
To enter the menu for each function, follow the steps below using a
voice command or :
lRegistering a mobile phone
1. “Setup” → 2. “Phone Setup” → 3. “Pair Phone”
lSelecting a mobile phone to be used
1. “Setup” → 2. “Phone Setup” → 3. “Connect Phone (Connect)”
lChanging the registered name of a mobile phone
1. “Setup” → 2. “Phone Setup” → 3. “Change Name”
lListing the registered mobile phones
1. “Setup” → 2. “Phone Setup” → 3. “List Phones”
lChanging the passkey
1. “Setup” → 2. “Phone Setup” → 3. “Set Passkey”
lDeleting a registered mobile phone
1. “Setup” → 2. “Phone Setup” → 3. “Delete Phone”

380
3-4. Using the hands-free phone system (for mobile phones)
Registering a mobile phone
Select “Pair Phone” using a voice command or , and perform the
procedure for registering a mobile phone. (→P. 369)
Selecting a mobile phone to be used
Select “Connect Phone (Connect)” using a voice command or
.
Pattern A
Select the mobile phone to be used by either of the following
methods, and select “Confirm” by using a voice command or
:
a. Press the talk switch and say the name of the desired mobile
phone.
b. Press the talk switch and say “List Phones”. When the name of
the desired mobile phone is read aloud, press the talk switch.
Pattern B
Select the mobile phone to be used using .
STEP1
STEP2
STEP2