wheel MAZDA CX90 2024 Service Manual
[x] Cancel search | Manufacturer: MAZDA, Model Year: 2024, Model line: CX90, Model: MAZDA CX90 2024Pages: 687, PDF Size: 15.46 MB
Page 305 of 687

How to Use the Distance& Speed Alert (DSA)
Operating the DSA
The DSA operates when all of the
following conditions are met.
The vehicle speed is about 30 km/h
(19 mph) or faster.
The system determines that the
distance to the vehicle ahead is
close.
When the DSA operates, the screen
display notifies the driver that the
distance between your vehicle and a
vehicle ahead is close.
Instrument cluster
Active driving display
NOTE
The objects which operate the DSA
are four-wheeled vehicles. However,
the DSA may also operate in the
presence of motorcycles and
bicycles.
The DSA does not operate on
stopped vehicles.
When the speed of the vehicle ahead
is extremely slow, the DSA may not
operate normally.
Turning off the DSA
There are 2 ways to turn off the DSA.
Tu r n off the DSA using Mazda
Connect.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
Turn off the DSA using the
i-ACTIVSENSE OFF switch.
Refer to How to Use the
i-ACTIVSENSE OFF switch on page
5-126.
Driving
Distance & Speed Alert (DSA)
5-154
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
Page 306 of 687

Driver Attention Alert(DAA)
*
The DAA is a system that detects the
driver fatigue and decreased
attentiveness based on various types of
vehicle information, and encourages
the driver to take a rest using a screen
display and warning sound.
Warnings and Cautionsfor Using the Driver
Attention Alert (DAA)
WARNING
Do not rely completely on the DAA.
The DAA does not prevent driver
fatigue or decreased attentiveness and
over reliance on the system could lead
to an accident. Drive carefully and turn
the steering wheel appropriately.
In addition, the system may not be
able to correctly detect driver fatigue
or decreased attentiveness depending
on the road and driving conditions.
The driver must take sufficient rest in
consideration of safe driving.
Driving
Driver Attention Alert (DAA)
*Some models.5-155
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
Page 309 of 687

Warnings and Cautionsfor Using the DriverMonitoring (DM)
WARNING
Do not rely completely on the DM.
The DM does not prevent driver
drowsiness or inattentive driving and
over reliance on the system could lead
to an accident. Drive carefully and turn
the steering wheel appropriately.
In addition, the system may not be
able to correctly detect driver
drowsiness or inattentive driving
depending on the road and driving
conditions. The driver must take
sufficient rest in consideration of safe
driving.
How to Use the Driver
Monitoring (DM)
Operating the drowsiness detection
function
The drowsiness detection function
operates when all of the following
conditions are met.
The vehicle has been driven for
about 20 minutes or longer.
The vehicle speed is about 5 km/h
(3 mph) or faster.
The system detects driver
drowsiness.
When the drowsiness detection
function operates, the screen display
and warning sound encourage the
driver to take a rest.
Warning pattern (caution) (white)
1. “Time for a Break”
Warning pattern (warning) (amber)
1. “Time for a Break”
NOTE
After the drowsiness detection
function has displayed the first
message encouraging the driver to
take a rest, it does not display it
again during the following periods.
Driving
Driver Monitoring (DM)
5-158
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
Page 317 of 687

The vehicle is driven on slippery
roads such as icy roads,
snow-covered roads, and unpaved
roads.
The vehicle is driven on a long
downslope.
The vehicle is driven on a steep
slope.
A two-wheeled vehicle such as a
motorcycle or bicycle is traveling
ahead.
Switch the MRCC off when it is not
being used.
Leaving the MRCC on when it is not in
use is dangerous as it could operate
unexpectedly, resulting in an accident.
Do not leave the vehicle while the
vehicle is stopped by the MRCC
control.
Getting out of the vehicle while the
stop hold control is operating is
dangerous as the vehicle may move
unexpectedly and result in an accident.
Before leaving the vehicle, switch the
MRCC off, shift the selector lever to
the P position, and apply the parking
brake.
CAUTION
If the vehicle is towed or you are
towing something, switch the MRCC
off.
Turn off the MRCC when the vehicle
is running on a chassis roller.
Driving
Mazda Radar Cruise Control (MRCC)
5-166
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04
Page 326 of 687

Cruising & Traffic Support(CTS)
*
The CTS is a system that reduces the
load on the driver while the vehicle is
driven on expressways or highways.
The CTS has the following 2 functions.
Constant speed/Headway control
function
The function performs headway
control to maintain the distance with a
vehicle ahead at a constant preset
speed without you having to depress
the accelerator or brake pedal.
Steering wheel assist function
When vehicle lane lines are detected,
the function assists your steering wheel
operation to follow the vehicle lane
lines.
When vehicle lane lines are not
detected, the function assists your
steering wheel operation to follow the
trajectory of the vehicle ahead.
Warnings and Cautionsfor Using Cruising &
Tra ffi c Support (CTS)
WARNING
Do not rely completely on the CTS.
The CTS is not an automated driving
system. Therefore, the function has
limitations. Do not rely completely
on the system and always stay on
course using the steering wheel.
Set a vehicle speed within the speed
limit according to the road
conditions and the weather
conditions.
The CTS may not be able to detect a
vehicle ahead depending on the type
of vehicle ahead and its conditions,
the weather conditions, and the road
conditions. Additionally, the system
might be unable to decelerate
sufficiently if the vehicle ahead
applies the brakes suddenly or
another vehicle cuts into your lane,
which could result in an accident.
Do not use the CTS under the
following conditions. Otherwise, it
may result in an accident.
The vehicle is driven on roads other
than expressways and highways.
The vehicle is driven on roads with
sharp curves or with heavy
traffic
where sufficient distances between
vehicles cannot be kept.
The vehicle is driven on roads where
acceleration and deceleration are
frequently repeated.
The vehicle is exiting the main lane
on an expressway to enter an
interchange, a rest area, or a parking
area.
Driving
Cruising &
Tra ffi c Support (CTS)
*Some models.5-175
CX-90_8KG7-EA-22L_Edition1_new
2022-11-17 16:05:04
Page 327 of 687

The vehicle is driven on slippery
roads such as icy roads,
snow-covered roads, and unpaved
roads.
The vehicle is driven on a long
downslope.
The vehicle is driven on a steep
slope.
A two-wheeled vehicle such as a
motorcycle or bicycle is traveling
ahead.
The vehicle is being towed or towing
another vehicle.
Proximity warnings activate
frequently.
Under bad weather conditions (rain,
fog , and snow).
Tires other than the
specified size are
used, such as when tire chains or
temporary spare tires are used.
The tire pressures are not adjusted to
the appropriate pressure.
Tires with insufficient tread are used.
Switch the CTS off when it is not
being used.
Leaving the CTS on when it is not in
use is dangerous as it could operate
unexpectedly, resulting in an accident.
Do not leave the vehicle while the
vehicle is stopped by the CTS control.
Getting out of the vehicle while the
stop hold control is operating is
dangerous as the vehicle may move
unexpectedly and result in an accident.
Before leaving the vehicle, switch the
CTS off, shift the selector lever to the P
position, and apply the parking brake.CAUTION
Heed the following cautions so that
the CTS can operate normally.
Do not modify the suspensions.
Always use wheels of the
specified
size for the front and rear wheels.
Consult an Authorized Mazda
Dealer for tire replacement.
Turn off the CTS when the vehicle is
running on a chassis roller.
Driving
Cruising &
Tra ffi c Support (CTS)
5-176
CX-90_8KG7-EA-22L_Edition1_new
2022-11-17 16:05:04
Page 330 of 687

The steering assist function operates if all of the following conditions are met while
traveling at a constant speed or in headway control.
When driving near the center of the lane and the white (yellow) lane lines on both
sides are detected clearly, or a vehicle ahead is detected clearly in front of your
vehicle and at less than about 56 km/h (35 mph).
The steering wheel is not turned sharply.The turn signal lever is not operated.
When the steering assist function operates, the steering assist operation display
changes from white to green.
Driving condition Instrument cluster di splay Active driving display indication
Steering assist within vehi-
cle lane lines
Steering assist along the
trajectory of the vehicle
ahead
NOTE
The steering assist function assists the st eering wheel operation so that the vehicle
remains near the center of the driving lane, however, the function might not be
able to keep the vehicle near the center of the driving lane when any of the
following condit ions is met.
The vehicle speed is high.The vehicle is making a sharp turn.The vehicle is driven on a road with steep or up and down (wavy) slopes.The vehicle is driven on a road with a large lateral gradient.
Driving
Cruising &
Tra ffi c Support (CTS)
5-179
CX-90_8KG7-EA-22L_Edition1_new
2022-11-17 16:05:04
Page 331 of 687

If you take your hands off the steering wheel, a warning (amber) is indicated on
the instrument cluster and the active driving display. Then, if you continue to leave
your hands off the steering wheel, a warning (red) is indicated on the instrument
cluster and the active driving display and a warning sound is activated.
Instrument cluster
Warning (amber)
Warning (red)
Active driving display
Warning (amber)
Warning (red)
Driving
Cruising & Tra ffi c Support (CTS)
5-180
CX-90_8KG7-EA-22L_Edition1_new
2022-11-17 16:05:04
Page 336 of 687

NOTE
The distance-between-vehicles can be set to 4 levels: Long, medium, short, and
extremely short distance.
The distance-between-vehicles differs depending on the vehicle speed, and the
slower the vehicle speed, the shorter the distance.
Close proximity warning
If your vehicle approaches a vehicle ahead while in headway control, a warning
sound and a display cautions you.
1. “Depress Brake Pedal”
NOTE
The close proximity warning may not be activated in the following cases.
The vehicle is driven at the same speed as the vehicle ahead.Directly after the CTS is set.Immediately after the accelerator pedal is released.Another vehicle cuts into the driving lane.Do not use the CTS system under conditions in which the close proximity warnings
are frequently activated.
Steering assist limit warning
If the steering assist function cannot keep the vehicle within the lane lines, a screen
display and a warning sound urge you to operate the steering wheel.
Instrument cluster
Driving
Cruising & Tra ffi c Support (CTS)
5-185
CX-90_8KG7-EA-22L_Edition1_new
2022-11-17 16:05:04
Page 337 of 687

Active driving display
The CTS is temporarily canceled
Constant speed/Headway control function
If any of the following conditions is met, the constant speed/headway control
function is temporarily canceled.
The brake pedal is depressed.The CANCEL switch is pressed one time.The DSC has operated.The Smart Brake Support (SBS) has operated.The front radar sensors cannot detect target objects.The parking brake is applied.Any door is opened.The driver’s seat belt is unfastened.The frequency of the braking operation by the CTS is high.
If the constant speed/headway control function is temporarily canceled, it will
resume operation at the previously se t speed by pressing the RES switch.
Steering assist function
If any of the following conditions is met, the steering assist function is temporarily
canceled. The steering assist function is automatically restored when its operation
conditions are met.
The constant speed/headway control function is canceled.White (yellow) lane lines cannot be detected or a vehicle ahead cannot be
recognized.
The turn signal lever is operated.The steering wheel is operated abruptly.Hands are off the steering wheel.The vehicle is making a sharp curve.The vehicle crosses a lane line.The width of the vehicle lane is narrow or wide.
NOTE
The notification method when the steering assist function is canceled can be
changed.
Refer to the Settings section in the Mazda Connect Owner's Manual.
Driving
Cruising &
Tra ffi c Support (CTS)
5-186
CX-90_8KG7-EA-22L_Edition1_new
2022-11-17 16:05:04