change key battery MAZDA MODEL 6 2014 Owners Manual (in English)
[x] Cancel search | Manufacturer: MAZDA, Model Year: 2014, Model line: MODEL 6, Model: MAZDA MODEL 6 2014Pages: 576, PDF Size: 8.58 MB
Page 76 of 576

Black plate (76,1)
CAUTION
Radio equipment like this is governed
by laws.
Changes or modifications not
expressly approved by the party
responsible for compliance could void
the user's authority to operate the
equipment.
NOTE
lThe keyless entry system operation may
vary due to local conditions.
lThe keyless entry system is fully operational
(door/trunk lid lock/unlock) when the push
button start is switched off. The system does
not operate if the push button start is
switched to any position other than off.
lIf the key does not operate when pressing a
button or the operational range becomes
too small, the battery may be dead. To
install a new battery, refer to Replace
Electrical Battery(page 6-32).
lBattery life is about one year. Replace the
battery with a new one if the KEY indicator
light (green) flashes in the instrument
cluster. Replacing the battery about once a
year is recommended because the KEY
warning light/indicator light may not
illuminate or flash depending on the rate of
battery depletion.
lAdditional keys can be obtained at an
Authorized Mazda Dealer. Up to 6 keys can
be used with the keyless functions per
vehicle. Bring all keys to an Authorized
Mazda Dealer when additional keys are
required.
qTransmitter
NOTEl(With theft-deterrent system)
The hazard warning lights flash when the
theft-deterrent system is armed or turned
off.
Refer to Theft-Deterrent System on page
3-43.
l(With the advanced keyless function)
A beep sound can be heard for confirmation
when the doors and trunk lid are locked/
unlocked using the key. If you prefer, the
beep sound can be turned off.
The volume of the beep sound can also be
changed.
Refer to Personalization Features on page
9-9.
Use the following procedure to change the
setting.
1. Switch the ignition off and close all of the
doors and the trunk lid.
2. Open the driver's door.
3. Within 30 seconds of opening the driver's
door, press and hold the LOCK button on
the key for 5 seconds or longer.
All of the doors and the trunk lid lock and
the beep sound activates at the currently set
volume. (If the beep sound is currently set
to not activate, it will not activate.) The
setting changes each time the LOCK button
on the key is pressed and the beep sound
activates at the set volume. (If the beep
sound has been set to not activate, it will
not activate.)
4. The setting change is completed by doing
any one of the following:
lSwitch the ignition to ACC or ON.lClose the driver's door.lOpen the trunk lid.lThe key is not operated for 10 seconds.lPress any button except the LOCK
button on the key.
lA request switch is pressed.
3-4
Before Driving
Keys
Mazda6_8DQ8-EA-13L_Edition3 Page76
Friday, June 13 2014 6:21 PM
Form No.8DQ8-EA-13L
Page 131 of 576

Black plate (131,1)
2. Verify that the push button start
indicator light (green) flashes.
NOTE
The push button start indicator light (green)
will flash even if the push button start is
pressed before depressing the brake pedal
(automatic transaxle) or the clutch pedal
(manual transaxle). If the clutch pedal is
depressed (manual transaxle) or the brake
pedal is depressed (automatic transaxle) under
this condition, the engine can be started by
resuming the procedure following this.
3. Touch the push button start using the
backside of the key (as shown) while
the push button start indicator light
(green) flashes.
Key
Indicator light
Push button start
4. After the push button start indicator
light (green) changes to full
illumination, press the push button start
with your finger.NOTE
lThe engine cannot be started unless the
clutch pedal is fully depressed (manual
transaxle) or the brake pedal is fully
depressed (automatic transaxle).
lIf there is a malfunction with the push
button start function, the push button start
indicator light (amber) flashes. In this case,
the engine may start, however, have the
vehicle checked at an Authorized Mazda
Dealer as soon as possible.
lIf the push button start indicator light
(green) does not illuminate, perform the
operation from the beginning again. If it
does not illuminate, have the vehicle
checked at an Authorized Mazda Dealer.
lIf you just want to change the ignition
position (with a dead key battery), after the
push button start indicator light (green)
changes to illumination, release the brake
pedal (automatic transaxle) or the clutch
pedal (manual transaxle), and press the
push button start. The ignition switches in
the order of ACC, ON, and OFF each time
it is pressed. Once the ignition switches off,
the ignition position can no longer be
switched. Therefore, if the engine starts,
perform the operation from the beginning
again.
When Driving
Start/Stop Engine
4-7
Mazda6_8DQ8-EA-13L_Edition3 Page131
Friday, June 13 2014 6:21 PM
Form No.8DQ8-EA-13L
Page 386 of 576

Black plate (386,1)
Courtesy Lights
Turns on when any door is open or the
illuminated entry system is on.
Courtesy light
qIlluminated Entry System
When the illuminated entry system
operates, the overhead light (switch is in
the DOOR position) and the courtesy
lights turn on for:
lAbout 30 seconds after the driver's
door is unlocked and the ignition is
switched off.
lAbout 15 seconds after all doors are
closed and the ignition is switched off.
lAbout 5 seconds after all doors are
closed and the ignition is switched off
when the key is out of the vehicle.
lIlluminates for about 15 seconds when
the ignition is returned from ACC to
OFF.
The light also turns off when:
lThe ignition is switched on and all
doors are closed.
lThe driver's door is locked.NOTE
lBattery saver
If any door is left open with the overhead
light switch in the DOOR position, or the
trunk lid is left open, the overhead light or
trunk light turns off after about 30 minutes
to prevent battery depletion.
lThe operation of the illuminated entry
system can be changed.
Refer to Personalization Features on page
9-9.
5-114
Interior Features
Interior Equipment
Mazda6_8DQ8-EA-13L_Edition3 Page386
Friday, June 13 2014 6:22 PM
Form No.8DQ8-EA-13L
Page 564 of 576

Black plate (564,1)
The following personalization features can be changed by the vehicle owner.
Items in which the feature setting can be changed differ depending on the market and specification.
Item Feature Factory Setting Available Settings
Power door lockChanges the auto lock/unlock function setting for all
the doors according to the vehicle speed, the vehicle
power supply condition, and the selector lever
position.
Refer to Auto Lock/Unlock Function on page 3-15.
Refer to Setup on page 5-55.Lock: Driving,
Unlock: IGN
OffOff/
Lock When Driving/
Lock: Driving,
Unlock: IGN Off/
Lock When Shifting
Out Of P/
Lock: Shift From P,
Unlock: In P
Keyless entry
systemThe method for unlocking the doors using the
transmitter can be changed.
Refer to Transmitter on page 3-4.
Refer to Setup on page 5-55.Once: Driver's,
Twice: All
DoorsTouch Once: All
Doors/
Once: Driver's,
Twice: All Doors
The time required for the doors to relock
automatically after unlocking with the transmitter can
be changed.
Refer to Setup on page 5-55.60 seconds90 seconds/
60 seconds/
30 seconds
Advanced keyless
entry systemThe volume of the answer-back beep during advanced
keyless entry system operation can be changed.
Refer to Locking, Unlocking with Request Switch
(With the advanced keyless function) on page 3-13.
Refer to Setup on page 5-55.MediumHigh/
Medium/
Low/
Off
The function to automatically lock the doors when
leaving the vehicle while carrying the key can be
changed.
Refer to Setup on page 5-55.OffOn/
Off
The method for unlocking the doors using the request
switch/transmitter can be changed.
Refer to Transmitter on page 3-4.
Refer to Locking, Unlocking with Request Switch
(With the advanced keyless function) on page 3-13.
Refer to Setup on page 5-55.Once: Driver's,
Twice: All
DoorsTouch Once: All
Doors/
Once: Driver's,
Twice: All Doors
The time required for the doors to relock
automatically after unlocking with the request
switch/transmitter can be changed.
Refer to Setup on page 5-55.60 seconds90 seconds/
60 seconds/
30 seconds
Illumination entryThe time required for the interior lamp to turn off
automatically can be changed
(prevents battery depletion when a door is open/ajar).
Refer to Setup on page 5-55.30 minutes60 minutes/
30 minutes/
10 minutes
The time required for the interior lamp to turn off
automatically after all doors are closed can be
changed.
Refer to Setup on page 5-55.15 seconds60 seconds/
30 seconds/
15 seconds/
7.5 seconds
Three-flash turn
signalThe three-flash turn function can be changed.
Refer to Setup on page 5-55.OnOn/
Off
Auto-wiper controlThe auto-wiper control function can be changed.
Refer to Setup on page 5-55.On
(Rain Sensing)On (Rain Sensing)/
Off (Intermittent)
*1
9-10
Personalization Features
Mazda6_8DQ8-EA-13L_Edition3 Page564
Friday, June 13 2014 6:23 PM
Form No.8DQ8-EA-13L
Page 574 of 576

Black plate (574,1)
T
Tiedown
Hook .......................................... 7-27
Tire Information ................................ 8-25
Tire Pressure Monitoring System .... 4-117
Tires .................................................. 6-34
Flat Tire ........................................ 7-3
Replacing a Tire ......................... 6-36
Replacing a Wheel ..................... 6-37
Snow tires .................................. 3-48
Specifications ............................... 9-7
Temporary Spare Tire ................. 6-37
Tire chains .................................. 3-48
Tire Inflation Pressure ................ 6-35
Tire Rotation .............................. 6-35
Uniform tire quality grading system
(UTQGS) ................................... 8-23
Towing
Recreational towing ................... 3-51
Trailer Towing ............................ 3-51
Towing Description ........................... 7-26
Traction Control System (TCS) ........ 4-93
Transmitter .......................................... 3-4
Trip Computer ................................... 4-18
Trip Meter ......................................... 4-11
Trouble
Battery runs out .......................... 7-20
Emergency Starting .................... 7-23
Emergency Towing .................... 7-26
Flat Tire ........................................ 7-3
Overheating ................................ 7-24
Parking in an Emergency ............. 7-2
Warning/indicator lights and warning
sounds ........................................ 7-29
When trunk lid cannot be
opened ........................................ 7-42
T
Trunk Lid .......................................... 3-19
Inside trunk release lever ............ 3-22
When trunk lid cannot be
opened ........................................ 7-42
Turn and Lane-Change Signals ......... 4-67
V
Vanity Mirrors ................................. 5-112
Vehicle Information Labels ................. 9-2
W
Warning Lights
ABS ............................................ 4-30
Air bag/front seat belt pretensioner
system ........................................ 4-35
Automatic transaxle ................... 4-34
Brake system .............................. 4-30
Charging system ......................... 4-31
Check engine .............................. 4-32
Check fuel cap ........................... 4-36
Door-ajar .................................... 4-37
Engine oil ................................... 4-31
HBC ........................................... 4-42
High engine coolant
temperature ................................ 4-33
KEY ............................................ 4-40
LDWS ........................................ 4-33
Low fuel ..................................... 4-36
Low washer fluid level ............... 4-38
Mazda Radar Cruise Control
(MRCC) ..................................... 4-45
Seat belt ...................................... 4-36
Tire pressure monitoring
system ........................................ 4-38
Warning/Buzzer ................................ 7-29
Warranty ............................................ 8-16
10-8
Index
Mazda6_8DQ8-EA-13L_Edition3 Page574
Friday, June 13 2014 6:23 PM
Form No.8DQ8-EA-13L