ESP MAZDA MODEL 6 2015 Quick Guide (in English)

When Driving
10
Lock-release button
Automatic Transaxle Controls
Various Lockouts:
Indicates that you must depress
the brake pedal and hold in the
lock-release button to shift (The
ignition must be switched ON).
Indicates the selector lever can be
shifted freely into any position.
Indicates that you must hold in
the lock-release button to shift.
Drive Selection Switch
Drive Selection
Drive selection is a system to switch the vehicle's drive mode. When the sport mode
is selected, vehicle's response against accelerator operation is enhanced. Use the
sport mode when higher vehicle response is required such as merging onto
expressway or accelerating to overtake.
2. Pull the drive selection switch to the side
(backward) to cancel the sport mode.
1. Press the drive selection switch to the
side (forward) to select the sport mode.
Select Mode Indicator Light
When the sport mode is selected, the select mode
indication turns on in the instrument cluster.
For details, refer to Section 4, “Transaxle”, “Drive Selection”.
.B[EB@&"&&,@&EJUJPO@2VJDL(VJEFJOEC







17
When Driving
For details, refer to Section 4, “Smart City Brake Support [Forward] (SCBS
F)”, “Smart City Brake Support [Reverse] (SCBS R)”.
Smart City Brake Support [Forward] (SCBS F)/Smart City Brake Support [Reverse] (SCBS R)
The Smart City Brake Support [Forward] (SCBS F) is a system designed to reduce
damage in the event of a collision by operating the brake control when the system’s
laser sensor (front) detects a vehicle ahead and the system determines that a
collision is unavoidable. The system operates while the vehicle is moving in the
forward direction in the speed range of 4 to 30 km/h (3 to 18 mph), reducing
damage in the event of a collision.
It may also be possible to avoid a collision if the relative speed between your
vehicle and the vehicle in front of you is less than about 20 km/h (12 mph).
Smart City Brake Support [Forward] (SCBS F)
The Smart City Brake Support [Reverse] (SCBS R) is a system designed to reduce
damage in the event of a collision by operating the brake control when the system’s
ultrasonic sensors detect a vehicle or a wall at the rear of the vehicle and the system
determines that a collision is unavoidable.
The system operates while the vehicle is reversing in the speed range of 2 to 8 km/h
(2 to 4 mph), reducing damage in the event of a collision.
Smart City Brake Support [Reverse] (SCBS R)
Do not rely completely on the system:
• (Smart City Brake Support [Forward] (SCBS F))
If the vehicle height or inclination is changed, the system will not be able to
correctly detect vehicles ahead. This will result in the Smart City Brake
Support (SCBS) system not operating normally or mistakenly operating,
which could cause a serious accident.
WARNING
Do not modify the suspension: • (Smart City Brake Support [Reverse] (SCBS R))The Smart City Brake Support [Forward] (SCBS F) operates in response to
a vehicle (4-wheeled vehicle) in front of your vehicle. Operation in
response to 2-wheeled vehicles or pedestrians is not guaranteed.
The Smart City Brake Support [Reverse] (SCBS R) operates in response to
a vehicle (4-wheeled vehicle) behind of your vehicle or a wall. Operation in
response to 2-wheeled vehicles or pedestrians is not guaranteed.
.B[EB@&"&&,@&EJUJPO@2VJDL(VJEFJOEC