MAZDA MODEL 6 2016 Owners Manual (in English)

Black plate (591,1)
qCapacities
(Approximate Quantities)
Item Capacity
Engine oilWith oil filter replacement 4.5 L (4.8 US qt, 4.0 Imp qt)
Without oil filter replacement 4.3 L (4.5 US qt, 3.8 Imp qt)
CoolantManual transaxle 6.9 L (7.3 US qt, 6.1 Imp qt)
Automatic transaxle 7.2 L (7.6 US qt, 6.3 Imp qt)
Manual transaxle oil 1.65 L (1.74 US qt, 1.45 Imp qt)
Automatic transaxle fluid 7.8 L (8.2 US qt, 6.9 Imp qt)
Fuel tank 62.0 L (16.4 US gal, 13.6 Imp gal)
Check oil and fluid levels with dipsticks or reservoir gauges.
qDimensions
Item Vehicle specification
Overall lengthWithout license plate holder 4,865 mm (191.5 in)
With license plate holder 4,895 mm (192.7 in)
Overall width 1,840 mm (72.4 in)
Overall height 1,450 mm (57.1 in)
Front tread17 inch wheel vehicle 1,585 mm (62.4 in)
19 inch wheel vehicle 1,595 mm (62.8 in)
Rear tread17 inch wheel vehicle 1,575 mm (62.0 in)
19 inch wheel vehicle 1,585 mm (62.4 in)
Wheelbase 2,830 mm (111.4 in)
qWeights
U.S.A. and Canada
ItemWeight
Manual transaxle Automatic transaxle
GVWR (Gross Vehicle Weight Rating) 1,917 kg (4,226 lbs) 1,945 kg (4,288 lbs)
GAWR (Gross Axle Weight Rating)Front 999 kg (2,202 lbs) 1,029 kg (2,269 lbs)
Rear 923 kg (2,035 lbs) 921 kg (2,030 lbs)
Mexico
Item Weight
GVW (Gross Vehicle Weight)Total 1,941 kg (4,279 lbs)
Front 993 kg (2,189 lbs)
Rear 948 kg (2,090 lbs)
Specifications
9-5
Mazda6_8EA2-EA-14K_Edition2 Page591
Saturday, January 10 2015 3:27 PM
Form No.8EA2-EA-14K

Black plate (592,1)
qAir Conditioner
The type of refrigerant used is indicated on a label attached to the inside of the engine compartment. Check the
label before recharging the refrigerant. Refer to Climate Control System on page 5-2.
Item Classification
Refrigerant Type HFC134a (R-134a)
qLight Bulbs
Exterior light
Light bulbCategory
Wattage UNECE
*1(SAE)
HeadlightsHalogenHigh beam 60 HB3 (9005)
Low beam 55 H11 (H11)
LEDHigh beam LED
*2―(―)
Low beam LED*2―(―)
Daytime running lightsWith halogen bulb
headlights60 HB3 (9005)
With LED headlights LED
*2―(―)
Front turn signal lights/Parking
lights (Front side-marker lights)With halogen bulb
headlights27/8―(#7444NA)
Front turn signal lights/Front
side-marker lightsWith LED headlights 27/8―(#7444NA)
Fog lights
íLED*2―(―)
Signature wing illumination LED*2―(―)
Side turn signal lights LED*2―(―)
High-mount brake light LED*2―(―)
Rear turn signal lights 21 WY21W (7443NA)
Rear side-marker lightsWith halogen bulb
headlights5 W5W (―)
With LED headlights LED
*2―(―)
Brake lights/Taillights LED*2―(―)
TaillightsWith halogen bulb
headlights5 W5W (―)
With LED headlights LED
*2―(―)
Reverse lights 21 W21W (7440)
License plate lights 5 W5W (―)
*1 UNECE stands for United Nations Economic Commission for Europe.
*2 LED is the abbreviation for Light Emitting Diode.
9-6íSome models.
Specifications
Mazda6_8EA2-EA-14K_Edition2 Page592
Saturday, January 10 2015 3:27 PM
Form No.8EA2-EA-14K

Black plate (593,1)
Interior light
Light bulbCategory
Wattage UNECE
*1
Trunk light 3―
Overhead light (Front)/Map lightsBulb type 8―
LED type LED
*2―
Rear map lightsBulb type 8―
LED type LED
*2―
Courtesy lights 5―
Vanity mirror lights
í2―
*1 UNECE stands for United Nations Economic Commission for Europe.
*2 LED is the abbreviation for Light Emitting Diode.
qTires
NOTE
The tires have been optimally matched with the chassis of your vehicle.
When replacing tires, Mazda recommends that you replace tires of the same type originally fitted to
your vehicle. For details, contact an Authorized Mazda Dealer.
Check the tire pressure label for tire size and inflation pressure.
Refer to Tire Inflation Pressure on page 6-41.
After adjusting the tire pressure, initialization of the tire pressure monitoring system is
necessary to make the system operates normally.
Refer to Tire Pressure Monitoring System Initialization on page 4-151.
Standard tire
(U.S.A. and Canada)
Tire sizeInflation pressure
Front Rear
P225/55R17 95V 250 kPa (36 psi) 250 kPa (36 psi)
P225/45R19 92W 240 kPa (35 psi) 240 kPa (35 psi)
(Mexico)
Tire sizeInflation pressure
Up to 3 persons―Full load
225/55R17 97VFront 230 kPa (2.3 bar, 33 psi) 250 kPa (2.5 bar, 36 psi)
Rear 230 kPa (2.3 bar, 33 psi) 320 kPa (3.2 bar, 46 psi)
225/45R19 92WFront 230 kPa (2.3 bar, 33 psi) 250 kPa (2.5 bar, 36 psi)
Rear 230 kPa (2.3 bar, 33 psi) 320 kPa (3.2 bar, 46 psi)
1 person's weight: About 75 kg
Specifications
9-7íSome models. Mazda6_8EA2-EA-14K_Edition2 Page593
Saturday, January 10 2015 3:27 PM
Form No.8EA2-EA-14K

Black plate (594,1)
Temporary spare tire
(U.S.A. and Canada)
Tire size Inflation pressure
T125/70R17 98M 420 kPa (60 psi)
(Mexico)
Tire size Inflation pressure
185/55R16 87M 320 kPa (3.2 bar, 46 psi)
Lug nut tightening torque
When installing a tire, tighten the lug nut to the following torque.
108―147 N·m (12―14 kgf·m, 80―108 ft·lbf)
qFuses
Refer to Fuses on page 6-56.
9-8
Specifications
Mazda6_8EA2-EA-14K_Edition2 Page594
Saturday, January 10 2015 3:27 PM
Form No.8EA2-EA-14K

Black plate (595,1)
Personalization Features
The following personalization features can be set or changed by an Authorized Mazda Dealer. Consult an
Authorized Mazda Dealer for details.
Additionally, some of the personalization features can be changed by the customer depending on the feature.
Personalization features which can be changed differ depending on the market and specification.
Settings can be changed by operating the center display screen.Settings can be changed by operating the vehicle switches.Settings can be changed by an Authorized Mazda Dealer.
Personalization Features
9-9
Mazda6_8EA2-EA-14K_Edition2 Page595
Saturday, January 10 2015 3:27 PM
Form No.8EA2-EA-14K

Black plate (596,1)
Item FeatureFactory
SettingAvailable
SettingsSettings change method
SafetySmart City
Brake
Support
(SCBS)
Refer to
Smart City
Brake
Support
(SCBS) on
page 4-127.The system can be changed so
that Smart City Brake Support
(SCBS) does not operate.
*1On On/OffRefer to
Settings
on page
5-49.――
Smart Brake
Support
(SBS)
Refer to
Smart Brake
Support
(SBS) on
page 4-132.The system can be changed so
that Smart Brake Support (SBS)
does not operate.
*1On On/OffRefer to
Settings
on page
5-49.―
The distance at which the
collision warning activates can
be changed.Near Near/FarRefer to
Settings
on page
5-49.―
The volume of the collision
warning can be changed.HighHigh/Low/OffRefer to
Settings
on page
5-49.―
9-10
Personalization Features
Mazda6_8EA2-EA-14K_Edition2 Page596
Saturday, January 10 2015 3:27 PM
Form No.8EA2-EA-14K

Black plate (597,1)
Item FeatureFactory
SettingAvailable
SettingsSettings change method
SafetyLane
Departure
Warning
System
(LDWS)
Refer to
Lane
Departure
Warning
System
(LDWS) on
page 4-98.The warning sound for the Lane
Departure Warning System
(LDWS) can be changed.
*2BeepBeep/Rumbl.Refer to
Settings
on page
5-49.―
The volume of the
warning sound for the
Lane Departure
Warning System
(LDWS) can be
changed.Rumbl. HighHigh/Mid/LowRefer to
Settings
on page
5-49.―
Beep High High/LowRefer to
Settings
on page
5-49.―
The sensitivity of the warning
for the Lane Departure Warning
System (LDWS) can be
changed.Low High/LowRefer to
Settings
on page
5-49.―
The warning timing in which
the Lane Departure Warning
System (LDWS) determines
that the vehicle may be
deviating from its lane can be
changed.Before At/Before
Refer to
Settings
on page
5-49.―
Blind Spot
Monitoring
(BSM)
system
Refer to
Blind Spot
Monitoring
(BSM)
System on
page 4-104.The volume of the Blind Spot
Monitoring (BSM) warning
beep can be changed.
*3HighHigh/
Low/
OffRefer to
Settings
on page
5-49.―
Personalization Features
9-11
Mazda6_8EA2-EA-14K_Edition2 Page597
Saturday, January 10 2015 3:27 PM
Form No.8EA2-EA-14K

Black plate (598,1)
Item FeatureFactory
SettingAvailable
SettingsSettings change method
SafetyDistance
Recognition
Support
System
(DRSS)
Refer to
Distance
Recognition
Support
System
(DRSS) on
page 4-109.The system can be changed so
that Distance Recognition
Support System (DRSS) does
not operate.
*1On On/OffRefer to
Settings
on page
5-49.―
The distance at which the
vehicle ahead indicator in the
display flashes can be changed.NearFar/Medium/
NearRefer to
Settings
on page
5-49.―
VehiclePower door
lock
Refer to
Auto
Lock/Unlock
Function on
page 3-15.Changes the auto lock/unlock
function setting for all the doors
according to the vehicle speed,
the vehicle power supply
condition, and the selector lever
position.Lock:
When
Driving
Unlock:
IGN OffLock:
When
Driving
Unlock: In
Park/
Lock: Out
of Park
Unlock: In
Park/
Lock:
Shifting
Out of
Park/
Lock:
When
Driving
Unlock:
IGN Off/
Lock:
When
Driving/
Off
Refer to
Settings
on page
5-49.
Refer to
Auto
Lock/Un-
lock
Function
on page
3-15.
Keyless
entry system
Refer to
Keyless
Entry
System on
page 3-4.The method for unlocking the
doors using the transmitter can
be changed.Driver's:
Once, All
Doors:
TwiceAll Doors:
Once/
Driver's:
Once, All
Doors:
TwiceRefer to
Settings
on page
5-49.Refer to
Transmit-
ter on
page 3-5.
The time required for the doors
to relock automatically after
unlocking with the transmitter
can be changed.60
seconds90
seconds/
60
seconds/
30
secondsRefer to
Settings
on page
5-49.―
9-12
Personalization Features
Mazda6_8EA2-EA-14K_Edition2 Page598
Saturday, January 10 2015 3:27 PM
Form No.8EA2-EA-14K

Black plate (599,1)
Item FeatureFactory
SettingAvailable
SettingsSettings change method
VehicleAdvanced
keyless entry
system
Refer to
Advanced
Keyless
Entry
System on
page 3-9.The method for unlocking the
doors using the request
switch/transmitter can be
changed.Driver's:
Once, All
Doors:
TwiceAll Doors:
Once/
Driver's:
Once, All
Doors:
Twice
Refer to
Settings
on page
5-49.
Refer to
Transmit-
ter on
page 3-5.
Refer to
Locking,
Unlocking
with
Request
Switch
(With the
advanced
keyless
function)
on page
3-13.
The volume of the answer-back
beep during advanced keyless
entry system operation can be
changed.MediumHigh/
Medium/
Low/
OffRefer to
Settings
on page
5-49.
Refer to
Locking,
Unlocking
with
Request
Switch
(With the
advanced
keyless
function)
on page
3-13.
The function to automatically
lock the doors when leaving the
vehicle while carrying the key
can be changed.Off On/OffRefer to
Settings
on page
5-49.―
The time required for the doors
to relock automatically after
unlocking with the request
switch/transmitter can be
changed.60
seconds90
seconds/
60
seconds/
30
seconds
Refer to
Settings
on page
5-49.―
Personalization Features
9-13
Mazda6_8EA2-EA-14K_Edition2 Page599
Saturday, January 10 2015 3:27 PM
Form No.8EA2-EA-14K

Black plate (600,1)
Item FeatureFactory
SettingAvailable
SettingsSettings change method
VehicleIllumination
entry
Refer to
Illuminated
Entry
System on
page 5-129.The time required for the
interior lamp to turn off
automatically can be changed
(prevents battery depletion
when a door is open/ajar).30
minutes60
minutes/
30
minutes/
10
minutes
Refer to
Settings
on page
5-49.―
The time required for the
interior lamp to turn off
automatically after all doors are
closed can be changed.15
seconds60
seconds/
30
seconds/
15
seconds/
7.5
secondsRefer to
Settings
on page
5-49.―
Auto-wiper
control
Refer to
Windshield
Wipers and
Washer on
page 4-64.The auto-wiper control function
can be changed.On On/Off
*4Refer to
Settings
on page
5-49.―
Daytime
running
lights
Refer to
Daytime
Running
Lights on
page 4-62.The function of the daytime
running lights can be changed.OnOn/
Off――
Auto
headlight off
Refer to
Headlights
on page
4-58.The time required for headlights
to turn off after ignition is
switched off can be changed.30
seconds120
seconds/
90
seconds/
60
seconds/
30
seconds/
Off
*5
Refer to
Settings
on page
5-49.―
Auto-light
control
Refer to
Headlights
on page
4-58.The headlight illumination
on/off sensitivity based on
surrounding lightness/darkness
can be changed.MediumHigh/
Med.
High/
Medium/
Med.
Low/
Low
Refer to
Settings
on page
5-49.―
9-14
Personalization Features
Mazda6_8EA2-EA-14K_Edition2 Page600
Saturday, January 10 2015 3:27 PM
Form No.8EA2-EA-14K