cruise control MAZDA MODEL CX-5 2017 (in English) Owner's Guide

4–161
When Driving
i-ACTIVSENSE
  If the Forward Sensing Camera (FSC) detects that the windshield is dirty or foggy,
the system functions related to the Forward Sensing Camera (FSC) are temporarily
stopped and the following warning lights turn on. However, this does not indicate a
problem. Remove the dirt from the windshield or press the defroster switch and defog the
windshield.
  High Beam Control System (HBC) warning light (amber)   Lane-keep Assist System (LAS) & Lane Departure Warning System (LDWS) warning
indication
  Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go
function) warning indication
  Smart Brake Support/Smart City Brake Support (SBS/SCBS) warning indica\
tion/
warning light (amber)
  If there are recognizable cracks or damage caused by fl ying gravel or debris on the
windshield, always have the windshield replaced. Consult an Authorized Mazda Dealer
for replacement.

CX-5_8FN1-EA-16L_Edition1.indb 1612016/12/12 10:06:17

4–162
When Driving
i-ACTIVSENSE
*Some models.
Radar Sensor (Front) *
Your vehicle is equipped with a radar sensor (front).
The following systems also use the radar sensor (front).
  Distance Recognition Support System (DRSS)  Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go\
function)  Smart Brake Support (SBS)
The radar sensor (front) functions by detecting the radio waves re fl ected off a vehicle ahead
or an obstruction sent from the radar sensor.
The radar sensor (front) is mounted behind the front emblem.

Radar sensor (front)

If “Front Radar Sensor Blocked” is displayed in the multi-informat\
ion display of the
instrument cluster, clean the area around the radar sensor (front).
CX-5_8FN1-EA-16L_Edition1.indb 1622016/12/12 10:06:17

4–167
When Driving
Cruise Control
*Some models.
Cruise Control *
With cruise control, you can set and automatically maintain any speed of \
more than about
25 km/h (16 mph).
WARNING
Do not use the cruise control under the following conditions: Using the cruise control under the following conditions is dangerous and could result in
loss of vehicle control.
 Hilly terrain Steep inclines Heavy or unsteady traffi c Slippery or winding roads Similar restrictions that require inconsistent speed
Cruise Control Switch

ON switch RESUME/+ switch
SET/- switch
OFF/CANCEL switch

NOTE
If your Mazda has the following steering switch, your Mazda is equipped \
with the Mazda
Radar Cruise Control with Stop & Go function (MRCC with Stop & Go function) system.
Refer to Mazda Radar Cruise Control with Stop & Go function (MRCC with Stop & Go
function) on page 4-121 .

CANCEL switch RES switch
OFF switch
switch switch
MODE switch
SET- switch
SET+ switch

CX-5_8FN1-EA-16L_Edition1.indb 1672016/12/12 10:06:18

4–16 8
When Driving
Cruise Control
Cruise Main Indication (White)/Cruise Set Indication (Green)

The indication has two colors.
Cruise Main Indication (White)
The indication turns on (white) when the
cruise control system is activated.
Cruise Set Indication (Green)
The indication turns on (green) when a
cruising speed has been set.
Activation/Deactivation
To activate the system, press the ON
switch. The cruise main indication (white)
turns on.
To deactivate the system, press the OFF/
CANCEL switch.
The cruise main indication (white) turns
off.
WARNING
Always turn off the cruise control system
when it is not in use: Leaving the cruise control system in an
activation-ready state while the cruise
control is not in use is dangerous as
the cruise control could unexpectedly
activate if the activation button is
accidentally pressed, and result in loss
of vehicle control and an accident.

NOTE
When the ignition is switched OFF, the
system status before it was turned off is
maintained. For example, if the ignition
is switched OFF with the cruise control
system operable, the system will be
operable when the ignition is switched ON
the next time.

To Set Speed
1. Activate the cruise control system by pressing the ON switch. The cruise
main indication (white) turns on.
2. Accelerate to the desired speed, which must be more than 25 km/h (16 mph).
3. Set the cruise control by pressing the SET/
switch at the desired speed. The
cruise control is set at the moment the
SET/
switch is pressed. Release the
accelerator pedal simultaneously. The
cruise set indication (green) turns on.

CX-5_8FN1-EA-16L_Edition1.indb 1682016/12/12 10:06:18

4–169
When Driving
Cruise Control
NOTE
  The cruise control speed setting cannot
be performed under the following
conditions:
  (Automatic transaxle)  The selector lever is in the P or N
position.
  (Manual transaxle)  The shift lever is in the neutral
position.
  The parking brake is applied.   Release the SET/ or RESUME/
switch at the desired speed, otherwise
the speed will continue increasing while
the RESUME/
switch is pressed and
held, and continue decreasing while the
SET/
switch is pressed and held
(except when the accelerator pedal is
depressed).
   On a steep grade, the vehicle may
momentarily slow down while ascending
or speed up while descending.
  The cruise control will cancel if the
vehicle speed decreases below 21 km/h
(13 mph) when the cruise control is
activated, such as when climbing a
steep grade.
  The cruise control may cancel at about
15 km/h (9 mph) below the preset speed,
such as when climbing a long, steep
grade.

The vehicle speed preset using the cruise
control is displayed in the instrument
cluster and the active driving display
(vehicles with active driving display).

Type A Instrument Cluster
Type B Instrument ClusterMulti-information Display
Active Driving Display

To Increase Cruising Speed
Follow either of these procedures.
To increase speed using cruise control
switch
Press the RESUME/
switch and hold it.
Your vehicle will accelerate. Release the
switch at the desired speed.

Press the RESUME/
switch and release
it immediately to adjust the preset speed.
Multiple operations will increase the
preset speed according to the number of
times it is operated.
Increasing speed with a single
RESUME/
switch operation
Instrument cluster display for vehicle
speed indicated in km/h: 1 km/h (0.6 mph)
Instrument cluster display for vehicle
speed indicated in mph: 1 mph (1.6 km/h)
CX-5_8FN1-EA-16L_Edition1.indb 1692016/12/12 10:06:19

4–170
When Driving
Cruise Control
To increase speed using accelerator
pedal
Depress the accelerator pedal to accelerate
to the desired speed. Press the SET/

switch and release it immediately.
NOTE
Accelerate if you want to speed up
temporarily when the cruise control is on.
Greater speed will not interfere with or
change the set speed. Take your foot off the
accelerator to return to the set speed.

To Decrease Cruising Speed
Press the SET/ switch and hold it. The
vehicle will gradually slow.
Release the switch at the desired speed.

Press the SET/
switch and release it
immediately to adjust the preset speed.
Multiple operations will decrease the
preset speed according to the number of
times it is operated.
Decreasing speed with a single SET/

switch operation
Instrument cluster display for vehicle
speed indicated in km/h: 1 km/h (0.6 mph)
Instrument cluster display for vehicle
speed indicated in mph: 1 mph (1.6 km/h)
To Resume Cruising Speed at More Than 25 km/h (16 mph)
If the cruise control system temporarily
canceled (such as by applying the brake
pedal) and the system is still activated, the
most recent set speed will automatically
resume when the RESUME/
switch is
pressed.
If vehicle speed is below 25 km/h
(16 mph), increase the vehicle speed up to
25 km/h (16 mph) or more and press the
RESUME/
switch.
To Temporarily Cancel
To temporarily cancel the system, use one
of these methods:
   Slightly depress the brake pedal.  (Manual transaxle)  Depress the clutch pedal.   Press the OFF/CANCEL switch.
If the RESUME/ switch is pressed when
the vehicle speed is 25 km/h (16 mph) or
higher, the system reverts to the previously
set speed.
NOTE
   If any of the following conditions occur,
the cruise control system is temporarily
canceled.
  The parking brake is applied.  (Automatic transaxle)  The selector lever is in the P or N
position.
  (Manual transaxle)  The shift lever is in the neutral
position.
  When the cruise control system is
temporarily canceled by even one of the
applicable cancel conditions, the speed
cannot be re-set.
  (Automatic transaxle)  The cruise control cannot be cancelled
while driving in manual mode (selector
lever shifted from D to M position).
Therefore, engine braking will not be
applied even if the transaxle is shifted
down to a lower gear. If deceleration is
required, lower the set speed or depress
the brake pedal.

CX-5_8FN1-EA-16L_Edition1.indb 1702016/12/12 10:06:19

4–171
When Driving
Cruise Control
To Deactivate
When a cruising speed has been set
(cruise set indication (green) turns on)
Long-press the OFF/CANCEL switch or
press the OFF/CANCEL switch 2 times.
When a cruising speed has not been set
(cruise main indication (white) turns on)
Press the OFF/CANCEL switch.
CX-5_8FN1-EA-16L_Edition1.indb 1712016/12/12 10:06:19

7–30
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.
Signal Warning


Blind Spot
Monitoring (BSM) OFF Indicator Light
* A problem in the system may be indicated under the following conditions.
Have your vehicle inspected at an Authorized Mazda Dealer.
 The light does not turn on when the ignition is switched ON.
 The light remains on even when the Blind Spot Monitoring (BSM) system \
can be operated.
 It turns on while driving the vehicle.
NOTE
If the vehicle is driven on a road with less traf fi c and few vehicles that the radar sensors
can detect, the system may pause (The Blind Spot Monitoring (BSM) OFF\
indicator light in
the instrument cluster illuminates). However, it does not indicate a malfunction.


(Amber)
Mazda Radar
Cruise Control with Stop & Go function (MRCC with Stop & Go function)
Warning Indication
* The message is displayed when the system has a malfunction. Have your ve\
hicle inspected
at an Authorized Mazda Dealer.


(Amber)
Lane-keep Assist System (LAS) & Lane Departure
Warning System
(LDWS) Warning Indication
* The message is displayed when the system has a malfunction. Have your ve\
hicle inspected
at an Authorized Mazda Dealer.
The system does not operate when the warning message is displayed.
CAUTION

Always use tires for all wheels that are of the specifi ed size, and the same manufacture,
brand, and tread pattern. In addition, do not use tires with signifi cantly diff erent wear
patterns on the same vehicle. If such improper tires are used, the system may not operate
normally.
 When an emergency spare tire is used, the system may not operate normally.


LED Headlight Warning Light This light illuminates if there is a malfunction in the LED headlight. H\
ave your vehicle
inspected by an Authorized Mazda Dealer.

CX-5_8FN1-EA-16L_Edition1.indb 302016/12/12 10:07:26

7–36
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
Display Content Action to be taken

Indicates when there is a problem with
the brake related system while the
vehicle is being held in a stop position
by the AUTOHOLD function or during
the Mazda Radar Cruise Control with
Stop & Go function (MRCC with Stop &
Go function) stop hold control. Depress the brake pedal.
Cancel the AUTOHOLD function or
the Mazda Radar Cruise Control with
Stop & Go function (MRCC with Stop
& Go function), and have your vehicle
inspected at an Authorized Mazda
Dealer.

Indicates the possibility of the vehicle
not being held in the stopped position by
the AUTOHOLD function, such as on
steep slopes.
Depress and hold your foot on the brake
pedal.

Indicates when the cancel operation is
done without depressing the brake pedal
while the vehicle is being held in the
stopped position by the AUTOHOLD
function or during the stop hold control
of the Mazda Radar Cruise Control with
Stop & Go function (MRCC with Stop &
Go function).
Cancel the AUTOHOLD function or
the Mazda Radar Cruise Control with
Stop & Go function (MRCC with Stop
& Go function) stop hold control while
depressing the brake pedal.

CX-5_8FN1-EA-16L_Edition1.indb 362016/12/12 10:07:28

7–43
If Trouble Arises
Warning/Indicator Lights and Warning Sounds
*Some models.
Lane Departure Warning Sound *
While the system is operating, if the
system determines that the vehicle may
depart from the lane, it sounds a warning
sound.
NOTE
  The volume of the Lane-keep Assist
System (LAS) & Lane Departure
Warning System (LDWS) warning sound
can be changed.
 Refer to Personalization Features on page 9-11 .
  The type of the Lane-keep Assist System
(LAS) & Lane Departure Warning
System (LDWS) warning sound can be
changed.
 Refer to Personalization Features on page 9-11 .

Collision warning *
If there is a possibility of a collision with
a vehicle ahead or an obstruction at the
rear of the vehicle, the warning light in the
instrument cluster fl ashes at the same time
as the warning indication is displayed in
the multi-information display or the active
driving display, and a warning sound is
activated intermittently.
Mazda Radar Cruise Control with Stop & Go function (MRCC with
Stop & Go function) System
Warnings
*
The Mazda Radar Cruise Control with
Stop & Go function (MRCC with Stop &
Go function) system warnings notify the
driver of system problems and precautions
on use when required. Check after hearing
a warning beep sound.

Warning beep What to check
While the Mazda Radar
Cruise Control with
Stop & Go function
(MRCC with Stop &
Go function) system is
operating, a single beep
sound is heard when
“Front radar blocked” is
displayed in the multi-
information display. Cancel the Mazda Radar
Cruise Control with
Stop & Go function
(MRCC with Stop &
Go function) system if
the radar sensor (front)
becomes dirty. Clean the
area around the radar
sensor (front).
The beep sounds
intermittently while the
vehicle is being driven. The distance between
your vehicle and the
vehicle ahead is too
close. Verify the safety
of the surrounding area
and reduce vehicle
speed.
While the Mazda Radar
Cruise Control with
Stop & Go function
(MRCC with Stop &
Go function) system is
operating, a single beep
sound is heard when
“Front radar sensor
system malfunction” is
displayed in the multi-
information display. A malfunction in the
system may be indicated.
Check the center display
to verify the problem
and then have your
vehicle inspected by
an Authorized Mazda
Dealer.

CX-5_8FN1-EA-16L_Edition1.indb 432016/12/12 10:07:29