MERCEDES-BENZ E-CLASS CABRIOLET 2010 Owners Manual
Manufacturer: MERCEDES-BENZ, Model Year: 2010, Model line: E-CLASS CABRIOLET, Model: MERCEDES-BENZ E-CLASS CABRIOLET 2010Pages: 333, PDF Size: 7.64 MB
Page 211 of 333
X
Press :or9 to select the Limit
spee d(winter tyres): function.
Th ec urren tsetting is displayed.
X Press the abutton to confirm.
X Press :or9 to set permanent
SPEEDTRONI Cinincrements of ten
(240 km/h to160 km/h). Permanent
SPEEDTRONIC is deactivated with the Off
setting.
X Pres sthe a button to stor ethe entry.
Activating/deactiva ting th eautomatic
lockin gfeature
If you select the Automaticd oor locks:
function, th evehicle is centrally locked above
as peed of around 15 km/h.
i Further information on the automatic
locki ngfeature (Y page71).
X Press the =or; button on the stee r-
ing wheel to select the Settingsmenu.
X Press the :or9 buttontos elect the
Vehicle submenu.
X Press the abutton to confirm.
X Press the :or9 button to select the
Automa ticd oor locks: function.
Yo uw ill see the selected setting: onor
off.
X Press the abutton to save the setting.
Activating/deactiva ting th eacoustic
locking confirmation
If you switch on the AcousticLock feed‐
back: function, an acousti csignal sounds
when you lock or unlock the vehicle. When
unlocking, the signal sounds once. When
locking, it sounds three times.
X Press the =or; button on the steer-
ing wheel to select the Settingsmenu.
X Press the :or9 buttontos elect the
Vehicle submenu.
X Press the abutton to confirm. X
Press the :or9 button to select the
Acoust icLock feedback: function.
Yo uw ill see the selected setting: Activa‐
ted orDeacti vated.
X Press the abuttontos ave the setting.
Activating/deactivating the radar sensor
system
i You must deactivat ethe radar sensor sys-
tem in cer tain countries and near radio
telescope facilities. Fur ther information
(Y page 32 4).
Ve hicles with anavigation system: the radar
senso rsystem is deactivated automatically if
you are close to radio teles cope facilities.
The followin gsystems are switched off when
the radar sensor syste misdeactiva ted:
R DIST RONIC PLUS (Y page 160)
R BA SP LUS (Y page 56)
R PRE-SAFE ®
Brake (Y page 59)
R Blind Spo tAssist (Y page 18 4)
X Press the =or; button on the steer-
ing wheel to select the Settingsmenu.
X Press the :or9 buttontos elect the
Vehicle submenu.
X Press the abutton to confirm.
X Press the 9or: button to select
Rada rsensor (See Owner's Man.).
Yo uw ill see the selected setting: onor
off.
X Press the abutton to save the setting.
Convenience Activating/deactiva
ting th eEASY-
ENTRY/EXIT feature
You can use the Easy Entry/Exit function
to activate or deactivate the easy-entry/exit
feature (Y page 100). G
Ris
kofi njury
The steering wheel moves when the EASY-
ENTRY/EXIT feature is active. There is arisk
of occupant sbecoming trapped. Before acti- 208
Menus and submenusOn-board computer and displays
BA 20
7ECE ÄJ 2010 /1a;1;2,e n-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 208
Page 212 of 333
vating th
eEASY-ENTRY/EXIT feature, make
sure that nobody can become trapped.
Do not leave children unsupervise dinthe
vehicle, even if they ar esecur edinac hild
restraint system .The chil dren could open the
driver's door and thereby unintentionally acti-
vat ethe EASY-ENTRY/EXIT feature and
becom etrapp ed.
X Press the =or; button on the steer-
ing whee ltoselect the Settings menu.
X Press the :or9 button to select the
Convenience submenu.
X Press the abutton to confirm.
X Press the :or9 button to select the
Easy Entry/Exit feature.
You will see the selected setting: onor
off.
X Press the abutton to save the setting.
Switching th ebelta djustmen ton/off
Fur ther information on belt adjust ment
(Y pag e42).
X Press the =or; button on the steer-
ing whee ltoselect the Settings menu.
X Press the :or9 button to select the
Convenience submenu.
X Press the abutton to confirm.
X Press the :or9 button to select the
Belt adjustment: function.
You will see the selected setting: onor
off.
X Press the abutton to save the setting.
Switching the fold in mirrors when lock-
ing function on/off
If you switch on the Fold mirrorsinwhen
locking: function, th eexterior mirror sfold
in when you lock the vehicle. When you
unloc kthe vehicle and then open adoor, the
exterior mirror sfold out again.
If you have switched the function on and you
fold the exterior mirror sinusing the button
on the door (Y page 101), they will not fold
out automatically. The exterior mirrors can then only be folded out usin
gthe button on
the door.
X Press the =or; button on the steer-
ing wheel to selec tthe Settings menu.
X Press the :or9 button to selec tthe
Convenience submenu.
X Press the abutton to confirm.
X Press the :or9 button to selec tthe
Fold mirror sinwhen locking: func-
tion.
Yo uw ill see the selected setting: onor
off.
X Press the abutton to save the setting.
Resetting to factory settings For safety reasons, not all function
sare reset:
the Limit speed (winter tyres): func-
tio ninp ermanen tSPEEDTRONIC can only be
set in the Vehiclesubmenu. If you want to
reset the Daytimedriving lamps: in the
Light submenu, yo umust turn the key in the
ignition lock to position 1.
X Press the =or; button on the steer-
ing wheel to select the Settingsmenu.
X Press the :or9 button to select the
Factor ysetting submenu.
X Press the abuttontoc onfirm.
The Rese tall settings? message
appe ars.
X Pres sthe : or9 button to select
No orYes.
X Press the abutton to confir mthe selec-
tion.
If you hav eselected Yes,the multifunction
display shows aconfirmation message. Menu
sand submenus
209On-board computer and displays
BA 207ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite 209 Z
Page 213 of 333
Displa
ymessages Hiding display messages
Display message sappear in th emultifunction display.
X Press the aor% button on the steering wheel to hide the display message.
The display message is cleared.
The multifunction display shows high-priority display messages in red.
You cannot hide display messages of the highest priority. The multifunction display shows
these messages con tinuously until the cause sfor the messages have been remedied.
Certain display message sare accompanie dbyanaudible warning tone or acontinuou stone.
Please respon dinaccordance with the displa ymessages and follow the additional notes in
this Owner's Manual.
When you stop and park the vehicle, please observ ethe notes on HOL D(Ypage 172) and
parking (Y page 153). Message memory
The on-boar dcomputer save scertain display messages. You can call up the display messages
in the message memory .
X Press the =or; button on the steerin gwheel to selec tthe Service menu.
If ther eare displa ymessages, the multifunction display shows, for example, 2messages.
X Press the 9or: buttontos elect the entry, e.g. 2messages.
X Confirm with a.
X Using 9or:,s croll through the displa ymessages.
When the ignition is switched off ,all display messages are deleted apart from some high-
priority display messages. Onc ethe causes of the high-priority displa ymessages have been
rec tified, th ecorrespondin gdisplay messages are also deleted. 210
Display messagesOn-bo
ardc omputer and displays
BA 20 7ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite2 10
Page 214 of 333
Safety systems
Display messages Possible causes/consequences and
M Solutions
ü If the symbol appear
sinthe multifunc tion display, aseat belt
tongue has been clipped into arear seat belt buckle.
Further information on the statu sindicato rfor the rea rseat
belts (Y page 43). ý G
Risk of injury
If the symbol appears in the multifunc tion display, aseat belt
tongue has not been clipped into arear seat belt buckle.
X If necessary, ask the occupant sinthe rea rtofasten their
seat belts.
Further information on the status indicator for the rear seat
belts (Y page 43). ÷ ES
Pi nop‐
erative
See Own‐
er's Man‐
ual G
Ris
kofa ccident
ESP ®
,B AS ,PRE-SAFE ®
,t he HOL Dfunction, hill start assist
and ESP ®
trailer stabilisation are not available due to amal-
function. BAS PLUS and PRE-SAFE ®
Brake may also have
failed. In addition, the äandå warning lamps light up
in the instrumen tcluster.
ATTENTION ASSIST is deactivated.
The brake system continues to func tion normally, but without
the func tions listed above.
X Drive on carefully.
X Visit aqualified specialist workshop. PRE-SAFE inopera‐
tive See
Owner's
Manual
G
Risk of injury
Importan tfunctions of PRE-SAFE ®
have failed. All other occu-
pant safety systems, e.g. airbags, remain available.
X Visit aqualified specialist workshop. Display messages
211On-board computer and displays
BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafaV ersion: 3.0.2.11
2010-01
-26T13:03:22+01:00 -Seite 211 Z
Page 215 of 333
Displa
ymessages Possible causes/consequences and
M Solutions
PR
E-SAFE Function
currently
limited
See Own‐
er'
sM an‐
ual G
Risk of accident
PRE-SAFE ®
Brake is tempora rily inoperative if:
R theD ISTRONIC PLUScove rint he ra diatorgrille is di rty.
R the sensor sint he bumpers are dirty.
R itsf unction is impaire ddue to heav yrain or snow.
R ther adar sensor system is temporarily inoperative ,e.g. due
to electromagnetic radiation emitted by nearby TV or radio
stations or other sources of electromagnetic radiation.
R the system is outside the operating tempe rature range.
R the on-board voltage is insufficient.
R E63A MG: you deactivat eESP®
.
PRE- SAFE ®
Brake is operational again and the displa ymes-
sage disappear swhen:
R the dir t(e.g. slush) drops away while the vehicle is in
motion.
R the system detects that the sensor sare full yavailable
again.
R thes ystem is within the operatin gtemperatur erange.
R E63A MG: you reactivate ESP ®
.
If the displa ymessage continues to be displayed:
X Clean the DI STRONIC PLUS cover in the radiator grille
(Y page 267).
X Clean the bumpers (Y page 267).
X Restart the engine.
X Wait until the batter yissufficiently charged. PRE-SA
FE Functions
limited
See Own‐
er's Man‐
ual
G
Ris
kofa ccident
PRE-SAFE ®
Brak eisfaulty. BA SPLUS or th edistance warning
signal may also have failed.
X Visit aqualified specialist workshop. A Malfunc‐
tion Con‐
sult work‐
shop
G
Risk of injury
Cabriolet: the roll bars are faulty.
X Visit aqualified specialist worksho pimmed iately. 212
Display messagesOn-board computer and displays
BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa
Version: 3.0.2.11 2010-01-26T13:03:22+01:00 -Seite 212
Page 216 of 333
Displa
ymessages Possible causes/consequences and
M Solutions
Ch
ilds eat in wrong
position
See Own‐
er'
sM an‐
ual G
Risk of in
jury
Vehicles with automatic child seat recognition on the front-
passenge rseat: the child seat is positioned incorrectly.
X Fit the child seat in the correc tposition. G
Risk of injury
Vehicles with automatic child seat recognition on the front-
passenger seat: the automatic child seat recognition sensor
is faulty.
X Visit aqualified specialist workshop. 6 Restraint
sys. mal‐
function
Consult
workshop
G
Risk of injury
There is amalfunction in the SRS (Supplemental Restraint
System). The 6warning lamp also lights up in the instru-
ment cluster.
X Visit aqualified specialist workshop. 6 Front
left mal‐
function
Consult
workshop
or
Front
righ
tmal‐
function
Consult
workshop G
Ris
kofi njury
SRS has malfunctioned at the front on the left or right. The
6 warning lamp also lights up in the instrumen tcluster.
X Visit aqualified specialist workshop. Display mess
ages
213On-board computer and displays
BA 207ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00-Seite2 13 Z
Page 217 of 333
Displa
ymessages Possible causes/consequences and
M Solutions
6 Re
ar left
malfunc‐
tio nC on‐
sul tw ork‐
shop
or
Rear
right mal‐
function
Consult
workshop G
Risk of in
jury
SRS has malfunctioned at the rear on the left or right .The
6 warning lamp also lights up in th einstrument clu ster.
X Visit aqualified specialist workshop. 6 Left
windowbag
malfunc‐
tion Con‐
sult work‐
shop
or
Right
windowbag
malfunc‐
tion Con‐
sult work‐
shop G
Risk of injury
There is amalfunction in the left-han dand/or right-hand
windowbag. The 6warnin glamp also lights up in the
instrumen tcluster.
X Visit aqualified specialist workshop. 214
Display messagesOn-board computer and displays
BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB
mkalaf
aV ersion: 3.0.2.11
2010-01-26T13:03:22+01:0
0-Seite 214
Page 218 of 333
Applying th
ebrakes Display messages Possible causes/consequences and
M Solutions
J ABS and
ESP cur‐
rently
unavaila‐
ble See
Owner's
Manual G
Risk of accident
AB S(Anti-lock Brakin gSystem), ESP ®
(Electronic Stability
Program), BA S(Brake Ass ist), PRE-SAFE ®
,t he HOL Dfunction,
hill start assis tand ESP ®
trailer stabilisation are temporarily
not available .For example, the on-boar dvoltage ma ybeinsuf-
ficient. BAS PLUS (Brake Assist PLUS) and PRE-SAFE ®
Brake
may be inoperative as well .Ina ddition, the ä,å
and ! warning lamps light up in the instrumen tcluster.
ATTE NTION ASSIS Tisdeactiva ted.
The brak esystem continues to function normally, but without
the function slisted above. The wheels could therefore lock if
you brak ehard, for example.
X Drive on carefully.
If the display message disappears, the functions listed
above are available again.
If the display message continues to be displayed:
X Drive on carefully.
X Visit aqualified specialist workshop. J AB
Sa nd
ESP inop‐
erative
See Own‐
er's Man‐
ual G
Ris
kofa ccident
ABS, ESP ®
,B AS ,PRE-SAFE ®
,t he HOL Dfunction, hill start
assis tand ESP ®
traile rstabilisatio nare not avail able due to a
malf unction. BAS PLUS and PRE-SAFE ®
Brake may als ohave
failed. In addition, the ä,åand! warning lamps
light up in the instrument cluster.
ATTENTION ASSIST is deactivated.
The brake system continues to function normally, but without
the functions listed above. The wheels coul dtherefore lock if
you brake hard, for example.
X Drive on carefully.
X Visit aquali fieds pecialist workshop. Display messages
215On-boardcomputer and displays
BA 20 7ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version:3.0.2.11
2010-01-26T13:03:22+01:0
0-Seite 215 Z
Page 219 of 333
Displa
ymessages Possible causes/consequences and
M Solutions
J EB
D, ABS
and ESP
inopera‐
tiv eS ee
Owner's
Manual G
Risk of accident
EBD (Electronic Brake-for ceDistribution), ABS, ESP ®
,B AS,
PRE-SAFE ®
,t he HOL Dfunction ,hill start assist and ESP ®
trailer stabilisation are no tavailab ledue to amalfunction. In
addition, the ä,åand! warning lamp sinthe
instrumen tcluster light up and awarning tone sounds.
ATTENTION ASSIST is deactivated.
The brake system continue stofunction normally, but without
the functions listed above. The wheels coul dtherefore lock if
you brake hard, for example.
X Drive on carefully.
X Visit aquali fieds pecialist workshop immediately. J Release
parking
brake You are drivin
gwith the parkin gbrake engaged .Awarning
ton ealso sounds.
X Release th eparking brake. J Br
ake
immedi‐
ately Am
alfunction has occurred while the HOL Dfunction or DIS-
TRONI CPLUSisa ctive.
or
Vehicles with manual transmissio n:with the HOL Dfunction
activated, you have either:
R opened the driver' sdoor and released th eseat belt or
R switched off th eengineor
R opened th ebonnet
At one ma yalso sound at regular intervals. The ton ebecomes
louder if you attempt to lock the vehicle.
You can notstart the engine.
X Paying attention to the traffic situation, immediately
depress the brake peda lfirmly and hold until the display
message disappears.
X Prevent the vehicle from rolling away before you leave it
(Y page 153).
You can restart the engine. 216
Display messagesOn-board computer and displays
BA 20
7ECE ÄJ 2010 /1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11 2010-01-26T13:03:22+01:00 -Seite 216
Page 220 of 333
Displa
ymessages Possible causes/consequences and
M Solutions
J Ch
eck
brake
fluid
level G
Risk of accident
There is insufficient brake fluid in the brake fluid reservoir. In
addition, the red Jwarning lamp in the instrumen tcluster
lights up and awarning tone sounds.
X Pul lover and stop th evehicle safely as soon as possible,
paying attention to road and traffic conditions. Do not con-
tinu edriving under any circumst ances.
X Engag ethe parkin gbrake.
X Cons ultaq ualified specialist worksho p.
X Do not top up the brake fluid. Thi swilln ot rectif ythe prob-
lem. # Check
brak
ewear Th
eb rake pa ds/linings have reach edthei rwearlimit.
X Visit aqualified specialist workshop. Lights
i Display messages about LEDs:
This display message will only appear if all LEDs have failed. Displa
ymessages Possible causes/consequences and
M Solutions
b Le
ft cor‐
nering
light
or
Right cor‐
nering
light Th
eleft or right-hand cornering light is faulty.
X Chec kwhether you ar epermitted to change the bulb your-
self (Y page 113).
or
X Visit aqualified specialist workshop. b Left
dipped
beam
or
Right
dipped
beam The left or right-hand dipped-bea
mheadlam pisfaulty.
X Check whethe ryou ar epermitted to change the bulb your-
self (Y page 11 3).
or
X Visit aqualified specialist workshop. Display messages
217On-board computer and displ ays
BA 207 ECE ÄJ 2010/1a; 1; 2, en-GB
mkalafa Version: 3.0.2.11
2010-01-26T13:03:22+01:00
-Seite 217 Z