light MERCEDES-BENZ SPRINTER 2013 MY13 Operator’s Manual

Electrical ste
p................................ 219
ESP ®
.............................................. 210
ESP ®
function ................................ 213
Overview .......................................... 34
Seat bel t........................................ 219
Warning- and indicator lamps
ABS ................................................ 210
Air filter .......................................... 218
ASR ................................................ 210
BAS ................................................ 210
Battery charg e............................... 214
Brake wea r.................................... 214
Bulbs .............................................. 219
Doors ............................................. 219
Engine oil leve l............................... 214
Preglow .......................................... 217
Reserve fuel ................................... 216
Tire pressure monitor ....................218
Water separator ............................. 218
Windshield washer fluid .................219
Warning lamp .................................... 265
Warning triangle ................................ 265
Washer fluid Adding ........................................... 246
Capacities ...................................... 326
Display message ............................ 209
Indicator lamp ................................ 219
Notes ............................................. 326
Wiping with .................................... 103
Wheels
Changing awheel .......................... 302
Checking ........................................ 275
Cleaning ......................................... 258
Important safety notes ..................274
Interchanging/changing ................302
Mounting awheel .......................... 303
Removing and mounting the spare
wheel ............................................. 309
Storing ........................................... 303
Tightening torque ........................... 307
Window curtain air bag ....................... 46
Windows see Side windows
Windshiel dheating
Problem (malfunction) ...................115
Switching on/off ........................... 115Windshiel
dwasher fluid
Adding ........................................... 246
Indicator lamp ................................ 219
Windshiel dwipers
Problem (malfunction) ...................105
Rain and light sensor .....................103
Rea rwindow wiper ........................ 104
Replacing the wiper blades ....103, 104
Setting the sensitivity (vehicles
with steering wheel buttons and
rain/light sensor) ........................... 189
Switching on/off ........................... 103
Wiping with windshield washer
fluid ............................................... 103
Winte rdiesel ..................................... 318
Winte rdriving
Slippery roa dsurface s................... 152
Snow chains .................................. 277
Winter operation
General notes ................................ 276
Radiator cover ................................. 28
Winter tires
M+S tires ....................................... 276
Setting alimit speed ...................... 149
Wiper blades
Cleaning ......................................... 258
Replacing ....................................... 104
Workshop
see Qualified specialist workshop Index
21

Exhaust gas aftertreatment
The exhaust gas aftertreatmen trequires a
reducing agent known as Diesel Exhaust Fluid
(DEF) in order to function correctly. Filling up
the DEF tank is usually part of the service
scope. DEFc onsumption depends on
operational and driving conditions and it is
not necessary to wait until the next scheduled
service to replenish the fluid. Fluid should be
added regularly to the DEFs upply reservoir
during vehicle operation or, at the latest, after
receiving the first warning message via the
on-board computer.
To conform to emission regulations, you must
operate the vehicle with DE Fand refill the
supply regularly .The engine management
recognizes attempts to operate the vehicle
without DEF, with thinned DEF or with
another reducing agent. After previous
warning messages, the engine management
then prevents a further engine start.
If the DEF level drops below 1.5 US gal
(5.5 l), the first warning message is issued
and a warning tone sounds. After the
message appears for the first time, and under
normal driving conditions, the remaining DEF
supply will last for approximately 1,000 mi
(1,600 km).
After that, the 0.8 US gal (3.0 l)reserve mark
is reached. Once the reserve range has been
reached, you will receive the next warning
message and you will hearas eries of warning
tones. After the first message, the DEF
reserve will last for approximately 1,200 mi
(1,900 km). However, you will only be able to
start the engine another 16 times.
You should immediately add 2.0 US gal
(7.6 l) of DEF (Y page 144) or have the DEF
supply reservoir filled at a qualified specialist
workshop.
When the number of remaining engine starts
is 0 , the engine management prevents the
engine being started.
If the 0018 checkengine indicator lamp lights
up, the exhaust gas aftertreatment is faulty or
an emission-related malfunctio nhas occurred (Y
page 204). You will then only be
able to drive a maximum 50 mi (80 km) before
the engine managemen trestricts the number
of starts remaining.
If the exhaust gas aftertreatment is faulty,
have it checked and repaired at a qualified
specialist workshop.
Further information on DEF can be found in
the "Refueling" ( Ypage 143) and "Service
products and capacities" (Y page 320)
sections. Attachments, bodies, equipment and
conversions
General notes !
For safety reasons, have add-on
equipment manufactured and installed
according to the Sprinter body/equipment
mounting directives in force. These body/
equipment mounting directives ensure that
the chassis and the body form one unit and
that maximum operating and road safety is
achieved.
We recommend for safety reasons that:
R you carry out no other modifications to
the vehicle.
R you obtain the agreement of the
distributor named on the inside of the
front cover for any deviations from the
approved body/equipment mounting
directives.
Approval from certified inspection
agencies or official approvals cannot rule
out risks to your safety.
We recommend that you use genuine
Mercedes-Benzp arts as well as conversion
parts and accessories that have been
specifically approved by Mercedes-Ben zfor
the type of vehicle.
These parts have been specially tested to
establish their safety, reliability and
suitability. Introduction
27 Z

Cockpit
Function Page
0005
Door control panel 38
0006
Ligh
tswitch 90
0026
Combinatio
nswitch • tur
nsignals 92
• high-beam headlamps 92
• windshield wipers 103
• rear window wiper 104
0025
Cruise control lever 155
0023
Horn
0024
Steering wheel without/
with buttons
36
0018
Instrument cluster 33
0019
Stowage compartment
001A
• Stowage compartment
with interior light
94
• Overhead control panel 37
001B
Rear-view mirror 86
001C
Rear view camera monitor
161 Function Page
001D
PARKTRONIC warning
display 157
001E
Opens/closes the right-
hand side window
76
001F
Stowage compartment
(jac kand vehicle tool kit) 264
0020
Glove box 222
0021
Center console 36
0022
Ignitio
nlock 133
0028
Further control panels 38
0029
Steering wheel adjustment 85
002A
Selector lever (automatic
transmission)
138
002B
Applies/releases the
parking brake
151
002C
Opens the hood 240
0014
Further control panels 3832
CockpitAt a glance

Instrumen
tcluster Displays and controls
Instrument cluster on vehicles without steering wheel buttons
Instrument cluster in vehicles with steering-wheel buttons
Function Page
0005
Speedometer 177
0006
Tachometer 177
0026
000E,
000FBrightens/dims the
instrumen tcluster lighting 177
0025
Fuel gage with fuel filler flap
location indicator
177
0023
Display
Vehicles without steering
wheel buttons
178
Vehicles with steering
wheel buttons Function Page
0024
Reset button
0007 33
0018
Menu button
0004 • changes standard display 178
• selects menus 179
0019
Service button
0012 Checks the engine oil level 242Instrument cluster
33At a glance

Function Page
0006
Activates/deactivates ASR 58
0006
0001
Central locking, interior/
rear compartment
69
0023
• Stowage compartmen
tor • CD changer, see separate
operating instructions or
0024
Cup holder with: 226
• ashtray 227
• cigarette lighter 227
0018
12 V socket 228 Overhea
dcontrol panel Function Page
0005
Microphone for the mobile
phone
228
0006
Switches the reading lamp
on/off, right
94
0026
Switches the automatic
interio
rlighting on/off 94
0025
• Eyeglasses compartment
or
223
• Anti-Theft Alarm system
(ATA)
60
0023
Switches the interior
lighting on/off
94
0024
Switches the reading lamp
on/off, left
94Overhead control panel
37At a glance

Door control panel
Function Page
0005
Adjusts the exterio
rmirrors 86
0006
Selects an exterior mirror 86
0026
Opens/closes the left-hand
side window
76
0025
Opens/closes the right-
hand side window
76 Further control panels
Control panel between the light
switch and the steering wheel
Function Page
0020
Switches the auxiliary
heating on/off
119
000C
Switches the heater
booster function on/off
125
0023
0024
Sets the working speed
167
0023
Switches the working
speed governor (ADR) on/
off
167
0009
0010
Ventilates the cargo
compartment
12938
Further control panelsAt a glance

Control panel between the steering
wheel and the ignition lock Function Page
000D
000A
Switches the central rear
compartment lighting on/
off
94 Further control panels
39At a glance

When you switch on the ignition, the
0008
warning lamp in the instrument cluster lights
up for approximately 4seconds.
A malfunction has occurred if the 0008
warning lamp:
R does not light up when you switch on the
ignition, or
R does not go out within a few seconds of
switching on the ignition, or
R lights up again
Safet yguidelines for seat belts,
Emergency Tensioning Devices (ETDs)
and air bags G
WARNING
R Damaged sea tbelts or seat belts that have
been subjected to stress in an accident
must be replaced and their anchoring
points must also be checked. Only use seat
belts which have been installed or supplied
by a qualified specialist workshop.
R Air bags and pyrotechnic Emergency
Tensioning Devices (ETDs) contain
perchlorate material, which may require
special handling and regard for the
environment. Check with your local
government's disposal guidelines.
California residents, see
www.dtsc.ca.gov/HazardousWaste/
Perchlorate/index.cfm.
R Air bags and ETDs are designed to function
on a one-time-only basis. An air bag or ETD
that has deployed must be replaced.
R Do not pass seat belts over sharp edges.
They could tear.
R Do not make any modification that could
change the effectiveness of the seat belts.
R Do not bleach or dye seat belts as this may
severely weaken them. In a crash they may
not be able to provide adequate protection.
R No modifications of any kind may be made
to any components or wiring of the SRS.
R Do not change or remove any component
or part of the SRS. R
Do not install additional paneling, seat
covers, badges etc.o ver the steering wheel
hub, co-driver's front air bag cover,
outboard sides of the seat backrests, door
trim panels, or door frame trims.
R Do not install additional electrical/
electronic equipment on or near SRS
components and wiring.
R Keep the area between air bags and
occupants free of objects (e.g. packages,
purses, umbrellas etc.).
R Do not hang items such as coat hangers
from the coat hooks or handles over the
door. These items may be thrown around in
the vehicle and cause head and other
injuries when the window curtai nair bag is
deployed.
R Air bag system components will be hot after
an air bag has inflated. Do not touch them.
R Never place your feet on the instrument
panel or on the seat. Always keep both feet
on the floor in front of the seat.
R Improper repair work creates a risk of
rendering the SRS inoperative or causing
unintended air bag deployment. Work on
the SRS must therefore only be performed
by qualified technicians. Please contac ta
qualified specialist workshop.
R For your protection and the protection of
others, when scrapping the air bag unit or
ETD, our safety instructions must be
followed. These instructions are available
from any authorized Sprinter Dealer.
R Given the considerable deployment speed,
required inflation volume, and the material
of the air bags, there is the possibility of
abrasions or other, potentially more serious
injuries resulting from air bag deployment.
If you sell your vehicle, we strongly
recommend that you infor mthe subsequent
owner that the vehicle is equipped with SRS.
Also refer them to the applicable section in
the Operator's Manual. Occupant safety
43Safety Z

The air bag installation locations are
identified by the label SRS/AIRBAG or
AIRBAG.
R
Front air bags (Y page 45)
R Thoraxbags (Y page 45)
R Window curtain air bags (Y page 46)
The air bags are deployed if the air bag control
unit detects the need for deployment. Only in
the event of such a situation will they provide
their supplemental protection.
If the driver and co-driver do not wear their
seat belts, it is not possible for the air bags to
provide their supplemental protection.
In the event of other types of impacts and
impacts below air bag deployment
thresholds, the air bags will not deploy. The
driver and passengers will then be protected
to the exten tpossible by a properly fastened
seat belt. Aproperly fastened seat belti s also
needed to provide the best possible
protection in a rollover.
Air bags provide additional protection, but are
not a substitute for the seat belts. All vehicle
occupants must fasten their seat belts
regardless of whether your vehicle is
equipped with air bags or not.
If an air bag is deployed, you will hear a bang
and a small amount of powder is released
briefly. Only in rare cases will the bang affect
your hearing. The powder emitted is not
generally hazardous to health. The 0008
warning lamp lights up. If it is safe to do so:
X Exit the vehicle immediately.
If you are unable to leave the vehicle:
X Open a window.
You will be able to breathe in fresh air and
avoid respiratory problems.
It is important for your safety and that of any
passengers to have deployed air bags
replaced and to have any malfunctioning air
bags repaired. This will help to make sure the
air bags continue to perform their protective
function for the vehicle occupants in the
event of a crash. Front air bags
Driver's air bag
0005inflates in front of the
steering wheel; co-driver's front air bag 0006
inflates in front of and above the glove box
and center console.
The front air bags increase the degree of
protection afforded to the driver and co-driver
against head and chest injuries.
They are deployed:
R in certain frontal collision situations
R if the system determines that air bag
deployment can offer additional protection
to that provided by the seat belt
R if the respective seat belt is fastened
R independently of other air bags in the
vehicle
If the vehicle rolls over, the front air bags are
generally not deployed. The front air bags are
deployed if it is detected that the vehicle is
decelerating rapidly in the longitudinal
direction.
In collision situations with low predicted
impact severity the front air bags are not
deployed. You will then be protected by the
seat belt, provided that it is fastened.
Thoraxbags G
WARNING
Only use seat covers which have been tested
and approved for your vehicle type by the
distributor named on the inside of the front
cover. The use of seat covers or other seat
coverings may cause a malfunction when the Occupant safety
45Safety
Z

properly secured in an appropriately sized
child restraint system or booster seat
recommended for the size and weight of the
child. For additional information, see the
"Children in the vehicle" section.
Ac hild's risk of serious or fatal injuries is
significantly increased if the child restraints
are not properly secured in the vehicle and/
or the child is not properly secured in the child
restraint.
! Make sure that the seat belt retracts fully.
The seat belt or belt buckle may otherwise
become trapped in the door or the seat
adjustment mechanism. This could
damage the door, door trim panels and the
seat belt. Damaged seat belts can no
longer fulfill their protective function and
must be replaced at a qualified specialist
workshop. X
To fasten the seat belt: adjust the seat
and move the backrest to an almost vertical
position (Y page 80).
X Pull the seat belt smoothly through belt
sash guide 0006.
X Without twisting it, guide the shoulder
section of the seat belt across the middle
of your shoulder and the lap section across
your hips. X
Engage belt tongue 0026in seat belt buckle
0023.
X The upper part of the seat belt must be
routed across the middle of your shoulder.
Adjust the seat belt to the appropriate
height as necessary.
X If necessary, pull upwards on the shoulder
section of the seat belt to tighten the belt
across your body.
X To raise the seat belt: slide belt sash
guide 0006upwards.
Belt sash guide 0006engages in various
positions.
X To lowert he seat belt: press and hold
release button 0005.
X Adjust bel tsash guide 0006to the
appropriate height.
X Let go of release button 0005and make sure
that belt sash guide 0006has engaged.
X To release the seat belt: press release
button 0025on seat belt buckle 0023.
X Guide seat belt to belt sash guide 0006.
All seat belts in the vehicle, excep tthe
driver's seat belt, are equipped with a special
seat belt retractor. This helps to secure the
child restraint system properly in the vehicle.
For further information on "Special seat belt
retractors", see (Y page 54).
Belt warning for drivers and co-drivers Regardless of whether the driver's and co-
driver's seat belts have already been
fastened, the
0014seat belt warning lamp
lights up for six seconds each time the engine
is started. It then goes out if the driver and
the co-driver have fastened their seat belts.
If the driver's seat belt is not fastened when
the engine is started, an additional warning
tone will sound. This warning tone switches
off after approximately six seconds or once
the driver's seat belt is fastened. Occupant safety
49Safety Z