engine MERCEDES-BENZ SPRINTER 2019 MY19 with 7” screen

#
Immedia tely rinse su rfaces that come in
con tact wi thDEF when filling with water
or remo veDEF wi tha damp clo thand
cold water.
If DEF has already cr ystallized, clean using a
spon geand cold water. If
yo u open the DEF tank, small amounts of
ammonia vapor may be released. Do not inhale
any ammonia vapor that may be released. Fill the
DEF tank only in well-ventilated areas.
DEF consum ption and filling capacity
DEF consum ption
Like fuel consum ption, DEF consum ption is highly
dependent upon driving style and operating con‐
ditions. DEF consum ption is usually within a
ra nge of 0 and 10% of the fuel consum ption. If
necessar y,DEF mu stbe refilled in acco rdance
with the instructions when there fill message is
displa yed in the instrument clus ter.This may also
be necessary between the scheduled mainte‐
nance.
To tal capacity of DEF tank Ve
hicl eT otal capacity
All model s5 .8gal (22 liters ) Exhau
stgas af tertre atment
The exhaust gas af tertre atment sy stem must be
operated in conjunction with DEF if it is tofunc‐
tion cor rectl y.
If yo u operate theve hicle without DEF or with
emissions-rele vant malfunctions, the legal MOT
appr oval is in validated. You will then probably no
longer be permitted tooperate theve hicle on
public roads.
It may be improper or punishable in some coun‐
tries tooperate a vehicle that uses no DEF or one
th at does not comply with the specifications of
th ese operating instructions.
Engine management monitors theex haust gas
af te rtre atment components for compliance with
emissions la wsand regulations. If you attem ptto
operate theve hicle without DEF, with diluted DEF
or with a dif fere nt reducing agent, this will be
de tected bythe engine management sy stem.
Other emissions- releva nt malfunctions, e.g.
me tering malfunctions or sensor er rors, are also
de tected and log ged. The engine management sy
stem subsequently
pr eve nts the engine being restar ted af ter issuing
a wa rning message.
Therefore add DEF tank regular lyduring vehicle
operation or, at the latest, af terre ceiving thefirst
wa rning message via the instrument clus ter. Engine oil
Note
s on engine oil
Obser vethe no tes on operating fluids
(/ page 263). *
NO
TEEngine damage caused byan
incor rect oil filter, incor rect oil or addi‐
tives #
Do not use engine oils or oil filters other
th an those which meet the specifica‐
tions necessary forth e prescribed
service inter vals. #
Do not alter the engine oil or oil filter in
order toachie velonger change inter vals
th an presc ribed. #
Do not use additives. #
Have the engine oil changed af terthe
prescribed inter vals. Mercedes-Benz
recommends having the oil
ch anged at a qualified specialist workshop.
Fu rther information on engine oil and oil filter:
R inthe MB Specifications for operating fluidsat
http://be vo.mercedes-benz.com (by entering
th e designation)
R at a qualified specialist workshop Te
ch nical da ta267

Quality and capacity of engine oil
%
The containers of
theva rious engine oils are
mar ked with theAC EA (Association of Euro‐
pean Automotive Manufacturers) and/or API
(America Petroleum Institu te) classifications.
Only use appr oved engine oils that cor re‐
spond tothe MB Specifications for operating
fl uids and the prescribed ACEA and/or API
classi fications named bel ow. Engine oils of
ot her grades are not permissible and can
re sult in the loss of the New Vehicle Limited
Wa rrant y.The use of other engine oils not
appr ovedfo r diesel engines can dama gethe
diesel particulate filter (DPF).
MB- Freigabe orMB-App roval Gasoline engine MB-F
reigabe orMB-
Appr oval
M2 74 229.5Diesel engine
sMB-Freigabe orMB-
Appr oval
OM642/OM65 1228.51,229.3 1,
229.5 1,229.52 If
th e engine oils lis ted in theta ble are not availa‐
ble, you may add a maximum 1.1 US qt (1.0 liter)
of thefo llowing engine oils once only:
R Vehicles with a gasoline engine: MB-Frei‐
ga be or MB-Appr oval 229.3 or ACEA A3/B4
R Vehicles with a diesel engine: MB-Freigabe
or MB-Appr oval 228.5, 229.3 or 229.5
Multig rade engine oils of the prescribed SAE clas‐
si fication (viscosity) may be used all year round,
ta king the outside temp erature into account.
Vi scosity of the engine oil
* NO
TEEngine damage due toincor rect
SA E classi fication (viscosity) of the
engine oil If
th eSA E classi fication (viscosity) of the
engine oil added is not suitable for prolonged
low outside temp eratures, it may cause
engine damage.
The temp erature readings of theSA E classi fi‐
cation are al ways based on fresh oil. Engine
oil ages when driving as a result of soot and
fuel residue. The characteristics of engine oil
de teriorate significantly at low outside tem‐
peratures. #
Use an engine oil of the appropriate SAE
classi fication at low outside temp era‐
tures. #
Use oil for all-year-round operation. The
temp erature readings of theSA E classi fica‐
tion are al ways based on fresh oil. The temp era‐
ture characteristics of the engine oil, especially at
low outside temp eratures, can de teriorate signifi‐
cantly due toaging when driving.
Therefore, Mercedes-Benz recommends that you
ch ange the engine oil before thest art of the cold
season. Only use an appr oved engine oil in the
prescribed SAE classi fication forth is purpose. The viscosity indicates
theflow characteristics of
a fluid. With rega rd toengine oil, a high viscosity
is synonymous with thick liquid and a low viscos‐
ity with thin liquid. Depending on the outside
te mp eratures, select the engine oil according to
th eSA E classi fication (viscosity). The table sho ws
th eSA E classi fications tobe used. The low tem‐
perature characteristics of engine oils can de teri‐
orate significantly during operation due toaging
and soot and fuel acc retion, forex ample. A regu‐
lar oil change with an appr oved engine oil in the
appropriate SAE classi fication is therefore
stro ngly recommended.
Ad ditive
* NO
TEEngine damage due touse of addi‐
tives in the engine oil The use of additional additives in
the engine
oil can damage the engine. #
Do not use any additional additives in
the engine oil. Miscibility of engine oil
The benefits of high-quality engine oils are
re
duced bymixing oil.
We recommend that you on lyuse engine oil of
th e same grade and SAE classi fication as the oil
fi lled at the last oil change. If, in exceptional 268
Tech nical da ta

cases, oil of
the type in the engine is not availa‐
ble, use ano ther appr oved mineral or synthetic
engine oil.
Ve hicles with a diesel engine: ifth e grade is
not available, you may also refill with engine oils
acco rding toMB-F reigabe or MB-Appr oval 228.5,
229.3 or 229.5. The top-up quantity is then limi‐
te dto maximum 1.1 US qt (1.0 liter).
Yo u must then ha vean oil change car ried out at
th e earliest possible opportunit y.
Ve hicles with a gasoline engine: ifth e grade is
not available, you may refill with engine oils
acco rding toMB-F reigabe or MB-Appr oval 229.3
or AC EA A3/B4. The top-up quantity is then limi‐
te dto maximum 1.1 US qt (1.0 liter).
Yo u must then ha vean oil change car ried out at
th e earliest possible opportunit y.
Engine oils are di stinguished by:
R engine oil brand
R grade (MB-F reigabe or MB-Appr oval)
R SAE classi fication (viscosity)
Oil change inter val
The on-board computer automatically sho wsthe
date of the next oil change as an event messa ge
on the displa y.
Mercedes-Benz recommends having the oil
ch anged at a qualified specialist workshop.
Engine oil capacities Engine
Engine oil
M2 74 around11.2 qt
(10.5 li ters)
OM642 around13.2 qt
(12.5 li ters)
OM651 (rear wheel
drive) around
12qt
(1 1. 5 liters) Information on oil consum
ption
Depending on the driving style, theve hicle con‐
sumes a maximum of 1.1 US qt (1.0 liter) of
engine oil per 620 miles (1000 km).
In thefo llowing cases, oil consum ption may also
exc eed this limit:
R theve hicle is ne w.
R you use theve hicle mostly under arduous
conditions.
R you drive frequently at a high engine speed. Re
gular maintenance is a prerequisite forfa vo ra‐
ble consum ption figures. You can on lyassess the
oil consum ption af ter a long journe y.Check the
oil le vel in the engine regularly, e.g. weekly or
ev ery time youre fuel. Note
s on brake fluid Obser
vethe no tes on operating fluids
(/ page 263). &
WARNING Risk of an accident due to
va por poc kets form ing in the brake sys‐
tem
The brake fluid con stantly absorbs moisture
from the air. This lo wersthe boiling point of
th e brake fluid. If the boiling point is too lo w,
va por poc kets may form inthe brake sy stem
when the brakes are applied hard.
This causes the braking ef fect to be impaired. #
Have the brake fluid rene we d at the
specified inter vals. *
NO
TEDama getopaint, plastic or rubber
by brake fluid There is a
risk of damage toproperty if brake
fl uid comes into con tact wi thpaint, plastic or
ru bber. #
If paint, plastic or rubber comes into
con tact wi thbrake fluid, rinse wi th
wate r immediatel y. Obser
vethe no tes on paintwork/matte finish
paintwork care (/ page 211).
Ha ve the brake fluid replaced regular lyat a quali‐
fi ed specialist workshop.
Only use brake fluid appr ovedby Mercedes-Benz
in accordance with MB-F reigabe or MB-Appr oval
33 1.0.
Fu rther information on brake fluid:
R inthe MB Specifications for operating fluids
at http://be vo.mercedes-benz.com
R at a qualified specialist workshop Coolant
Note
s on coolant
Obser vethe no tes on operating fluids
(/ page 263). Te
ch nical da ta269

&
WARNING ‑ Risk of fire and injury from
antifreeze
If antifreeze comes into con tact wi thhot com‐
ponent parts in the engine compartment, it
may ignite. #
Allow the engine tocool down before
adding antif reeze. #
Make sure that no antifreeze spills out
next tothefiller opening. #
Thoroughly clean off any antifreeze from
component parts before starting the
ve hicle. *
NO
TEDama gecaused byincor rect cool‐
ant #
Only add coolant that has been pre‐
mixed with therequ ired antifreeze pro‐
te ction. Information on coolant is
available at thefo llow‐
ing locations:
R inthe MB Specifications for operating fluids
31 0.1
- at http://be vo.mercedes-benz.com
- inthe BeVo app
R at a qualified specialist workshop
* NO
TEOverheating at high outside tem‐
peratures If an inapp
ropriate coolant is used, the engine
cooling sy stem is not suf ficiently pr otected
against overheating and cor rosion at high out‐
side temp eratures. #
Always use a coolant appr ovedby
Mercedes-Benz. #
Obser vethe instructions in the MB
Specifications for operating fluids3 10.1 . *
NO
TEPaint wo rkdamage due tocoolant #
Do not spill coolant on painted sur faces. Ha
ve the coolant regularly replaced at a qualified
specialist workshop.
No tethe proportion of anti-cor rosion agent/anti‐
freeze in the engine cooling sy stem within thefo l‐
lowing temp erature ranges:
R Atleast 50% (antifreeze pr otection up to
about -35 °F (-37 °C)) R
Maximum 55% (antifreeze pr otection up to
-49 °F (-45 °C))
Coolant capacities
Engine cooling sy stem Engine
Coolant
M2 74 approx. 3.0 gal
(1 1. 5 liters)
OM642 approx. 2.6 gal
(10 liters)
OM65 1a pprox. 2.5 gal
(9.5 liters) Wi
ndshield washer fluid Note
s on windshield washer fluid
Obser vethe no tes on operating fluids
(/ page 263). &
WARNING ‑ Risk of fire and injury from
windshield washer concentrate
Wi ndshield washer concentrate is highly flam‐
mable. It could ignite if it comes into con tact
wi th hot engine component parts or the
ex haust sy stem. #
Make sure that no windshield washer
concentrate spills out next tothefiller
opening. *
NO
TEDama getotheex terior lighting
due tounsuitable windshield washer fluid Uns
uitable windshield washer fluid may dam‐
age the plastic sur face of theex terior lighting. #
Only use windshield washer fluid which
is also suitable for use on plast ic surfa‐
ces, e.g. MB SummerFit or MB Winter‐
Fit. *
NO
TEBlocked spr aynozzles caused by
mixing windshield washer fluids #
Do not mix MB SummerFit and MB Win‐
te rFit with other windshield washer flu‐
ids. Do not use distilled or de-ionized
water.Other‐
wise, the le vel sensor may give a false reading. 270
Tech nical da ta

Display messages
Possible causes/consequences and 0050 0050Solutions #
Stop in a safe location immediately. Do not continue driving. #
Consult a qualified specialist workshop. #
Do not add brake fluid.
Caution Brakes Overhea-
ted Drive Carefully *I
fth e all-wheel drive has been switched on, the brake sy stem can
ove rheat during extreme off-road use. #
Decele rate or stop and let the brake sy stem cool down.
Active Brake Assist Func-
tions Limited See Opera-
tor's Manual *A
ctive Brake Assi stis malfunctioning. #
Visit a qualified specialist workshop.
Active Brake Assist Func-
tions Currently Limited
See Operator's Manual *A
ctive Brake Assi stistemp orarily una vailable.
The ambient conditions are outside the sy stem limits (/ page139). #
Continue driving.
When the ambient conditions are within the sy stem limits, the
sy stem will be available again. #
Ifth e display message does not go out, stop in a safe location
and re-sta rt the engine.
Radar Sensors Dirty See
Operator's Manual *
The radar sensor sy stem is malfunctioning. Possible causes:
R dirt on the sensors
R heavy precipitation
R extended country drives wi thout other traf fic, e.g. in the desert
Driving sy stems and driving saf ety sy stems may be malfunctioning
or temp orarily una vailable.
When the causes ha vebeen eliminated, the driving sy stems and
driving saf ety sy stems will be available again.
If th e display message does not disappear, proceed as follo ws: #
Stop in accordance with the tra ffic conditions. #
Clean all sensors (/ page212). #
Re-sta rt the engine.
SOS NOT READY *T
he emergency call sy stem is not available.
Po ssible causes forth is include:
R The ignition is switched off
R The emer gency call sy stem is malfunctioning. #
Switch on the ignition.
If an emer gency call is una vailable, a message tothis ef fect will
appear on the multifunction display of the instrument clus ter. #
Visit a qualified specialist workshop.
% Yo
u can find more information on there gional availability of the
emer gency call sy stem at: http://www.mercedes-benz.com/
connect_ecall 280
Display messages and warning and indicator lamps

Display messages
Possible causes/consequences and 0050 0050Solutions Currently Unavailable
Radar Sensors Dirty
*
The radar sensor sy stem is malfunctioning. Possible causes:
R dirt on the sensors
R heavy precipitation
R extended country drives wi thout other traf fic, e.g. in the desert
The following sy stems may be af fected:
R Active Dis tance Assi stDISTRONIC (/ page 143)
R Blind Spot Assist(/ page152)
R Active Brake Assi st (/ page 139)
Driving sy stems and driving saf ety sy stems may be malfunctioning
or temp orarily una vailable.
When the causes ha vebeen eliminated, the driving sy stems and
driving saf ety sy stems will be available again.
If th e display message does not disappear: #
Stop in a safe location. #
Clean all sensors (/ page212). #
Re-sta rt the engine. #
If necessar y,visit a qualified specialist workshop.
Active Distance Assist
Now Available *T
heActive Dis tance Assi stDISTRONIC is operational again and can
be acti vated (/ page144).
00D9 Off *T
he HOLD function has been deactivated because theve hicle is slip‐
ping or an activation condition has not been met. #
Re-acti vate the HOLD function later on or check the HOLD func‐
tion's activation conditions (/ page145).
Blind Spot Assist Inoper-
ative *B
lind Spot Assist is malfunctioning (/ page152). #
Visit a qualified specialist workshop.
Blind Spot Assist Trailer
Not Monitored *W
hen you es tablish an electrical connection with the trailer, Blind
Spot Assist will remain available but the area beside the trailer will
not be monitored. The function of Blind Spot Assist may be restric‐
te d as a result (/ page152). #
Press the left-hand Touch Control and ackn owledge the display
message.
Blind Spot Assist Cur-
rently Unavailable See
Operator's Manual *B
lind Spot Assist is temp orarily una vailable (/ page152).
The sy stem limits ha vebeen reached (/ page152). #
Continue driving.
When the causes ha vebeen eliminated, the sy stem will be avail‐
able again.
or #
Ifth e display message does not go out, stop in a safe location
and re-sta rt the engine. #
If necessar y,clean there ar bumper. If the bumper is very dirty,
th e sensors in the bumper may malfunction.
*T he camera view is reduced (/ page155). 284
Displaymessa ges and warning and indicator lamps

Display messages
Possible causes/consequences and 0050 0050Solutions
Active Lane Keeping
Assist Camera View
Restricted See Opera-
tor's Manual Po
ssible causes:
R dirt on the windshield in the camera's field of vision
R heavy precipitation or fog
Driving sy stems and driving saf ety sy stems may be malfunctioning
or temp orarily una vailable.
When the causes ha vebeen eliminated, the driving sy stems and
driving saf ety sy stems will be available again.
If th e display message does not disappear: #
Stop in a safe location. #
Clean the windshield.
Active Lane Keeping
Assist Inoperative *A
ctive Lane Keeping Assist is malfunctioning (/ page155). #
Visit a qualified specialist workshop.
Active Lane Keeping
Assist Currently Unavail-
able See Operator's Man-
ual *A
ctive Lane Keeping Assist is temp orarily una vailable (/ page155).
The ambie nt conditions are outside the sy stem limits (/ page155). #
Continue driving.
When the ambient conditions are within the sy stem limits, the
sy stem will be available again.
If th e display message does not disappear: #
Stop in a safe location. #
Clean the windshield.
00AD
ATTENTION ASSIST Inop-
erative *T
heATTENTION ASSIST is malfunctioning. #
Visit a qualified specialist workshop.
00AD
ATTENTION ASSIST:
Take a Break! *T
heATTENTION ASSIST has de tected fatigue or increasing inatten‐
tiveness on the driver's part (/ page151). #
Ifnecessa ry,ta ke a break. Engine
Displ
aymessages
Possible causes/consequences and 0050 0050Solutions
00D4
Fuel Level Low *T
he fuel supplies ha vereached there ser veleve l. #
Refuel.
009E
Replace Air Filter *
Ve hicles with a diesel engine: The engine airfilter is clogged and
must be replaced. #
Visit a qualified specialist workshop. Display messages and
warning and indicator lamps 285

Display messages
Possible causes/consequences and 0050 0050Solutions
00AC *T
hefan mo tor is defective. #
Without a high engine load, continue tothe nearest qualified
specialist workshop. Ensure that the coolant temp erature dis‐
play remains below 248 °F (120 °C).
003A Check Fuel Filter *T
hewaterth at has accumulated in thewate r sepa rato r has reached
th e maximum le vel. #
Drain thewate r sepa rator (/ page 209).
00B3 Engine Oil Level Cannot
Be Measured *T
he electrical connection tothe oil le vel sensor has been inter rup‐
te d or the oil le vel sensor is defective.
The engine oil le vel has fallen tothe minimum le vel. #
Visit a qualified specialist workshop.
00B2
Engine Oil Pressure Stop
Switch Off Engine *D
isplay message for cer tain engines only:
The engine oil pressure is too lo w.
* NO
TEEngine damage caused bydriving with insuf ficient
engine oil pressure #
Avoid driving with insuf ficient engine oil pressure. #
Stop in a safe location immediately. Do not continue driving. #
Consult a qualified specialist workshop.
00B2
Check Engine Oil Level
(Add 1 Liter) *D
isplay message for cer tain engines only:
The engine oil le vel has fallen tothe minimum le vel.
* NO
TEEngine damage caused bydriving with insuf ficient
engine oil #
Avoid long journe yswith insuf ficient engine oil. #
Che ckthe engine oil le vel at the next fuel stop.
To p up engine oil (/ page 205).
Obser vethe no tes on engine oil (/ page 267).
00B2
Engine Oil Reduce Oil
Level *D
isplay message for cer tain engines only:
The engine oil le vel is too high.
* NO
TEEngine damage caused bydriving with excess engine
oil #
Avoid long journe yswith excess engine oil. #
Visit a qualified specialist workshop immediately and ha vethe
engine oil suctioned off.
00B2 *D
isplay message for cer tain engines only:
The engine oil le vel is too lo w. 286
Display messages and warning and indicator lamps

Display messages
Possible causes/consequences and 0050 0050Solutions
Engine Oil Level Low
Stop Vehicle Turn
Engine Off *
NO
TEEngine damage caused bydriving with insuf ficient
engine oil #
Avoid long journe yswith insuf ficient engine oil. #
Stop in a safe location immediately. Do not continue driving. #
Switch off the engine. #
Check the engine oil le vel.
Ad d engine oil (/ page 205).
Obser vethe no tes on engine oil (/ page 267).
00B2
Check Engine Oil At
Next Refueling *T
he engine oil le vel has fallen tothe minimum le vel.
* NO
TEEngine damage caused bydriving with insuf ficient
engine oil #
Avoid long journe yswith insuf ficient engine oil. #
Che ckthe engine oil le vel at the next fuel stop.
To p up engine oil (/ page 205).
Obser vethe no tes on engine oil (/ page 267).
003D
Stop Vehicle Leave
Engine Running *T
he battery's charge leve l is too lo w. #
Stop in a safe location immediately. Do not continue driving! #
Let the engine run. #
Do not continue driving until the display message goes out.
003D
Stop Vehicle See Opera-
tor's Manual *T
he battery is no longer being charge d and has reached an exces‐
sively low battery charge leve l.
* NO
TEPossible engine damage if you continue driving #
Do not continue driving under any circum stances. #
Consult a qualified specialist workshop. #
Stop in a safe location immediately. Do not continue driving. #
Switch off the engine. #
Consult a qualified specialist workshop.
003D
12 V Battery See Opera-
tor's Manual *T
he engine is off and the battery charge leve l is too lo w. #
Switch off electrical consumers that are not required. #
Let the engine runfo r a few minutes or drive an extended dis‐
ta nce.
The battery is charge d.
003D
See Operator's Manual *T
he battery is no longer being charge d.
* NO
TEPossible engine damage if you continue driving #
Do not continue driving under any circum stances. #
Consult a qualified specialist workshop. Display messages and
warning and indicator lamps 287

Display messages
Possible causes/consequences and 0050 0050Solutions #
Stop in a safe location immediately and switch off the engine. #
Consult a qualified specialist workshop.
00AC
Coolant Too Hot Stop
Vehicle Turn Engine Off *T
he coolant is too hot. #
Stop in a safe location immediately and switch off the engine. &
WARNING Danger of bu rns when opening the hood
If yo u open the hood when the engine has overheated or during
a fire inthe engine compartment, you could come into con tact
wi th hot gases or other escaping operating fluids. #
Before opening the hood, allow the engine tocool down. #
Intheeve nt of a fire inthe engine compartment, keep the
hood closed and call thefire service. &
WARNING Risk of scalding from hot coolant
The engine cooling sy stem is pressurized, particularly when the
engine is warm. If you open the cap, you could be scalded byhot
coolant spr aying out. #
Let the engine cool down before opening the cap. #
When opening the cap, wear pr otective glove s and saf ety
gl asses. #
Open the cap slowly torelease pressure. #
Wait until the engine has cooled down. #
Ensure that the air supply tothe engine radiator is not obstruc‐
te d.
00AC Check Coolant Level See
Operator's Manual *T
he coolant le vel is too lo w. &
WARNING Risk of scalding from hot coolant
The engine cooling sy stem is pressurized, particularly when the
engine is warm. If you open the cap, you could be scalded byhot
coolant spr aying out. #
Let the engine cool down before opening the cap. #
When opening the cap, wear pr otective glove s and saf ety
gl asses. #
Open the cap slowly torelease pressure. *
NO
TEEngine damage due toinsuf ficient coolant #
Avoid long journe yswith insuf ficient coolant. #
Top up coolant (/ page 206).
Regeneration not possi-
ble *N
otall conditions ha vebeen met forre ge neration of the diesel par‐
ticulate filter . #
Continue driving as normal until all conditions ha vebeen met for
re ge neration of the diesel particulate filter. 288
Display messages and warning and indicator lamps