lock MERCEDES-BENZ SPRINTER 2019 MY19 with Base Radio Operator’s Manual

#
Tounlo ck:pull lo cking pin 2upwards man‐
ually or use thec ent rallockin gbutton to
unlo ckthes liding door (/ page44). #
Press but ton1or pull outside handle 3.
The sliding door opens or closes. #
Press button 1again or pull outside handle
3.
The sliding door stops moving. Un
locking thee lectric sliding door manually If
th er eh as been amalfunction or if theb attery
has been disconnected, youc an use release
cat ch2 todisconnect thes liding door from the
electric mo tor.Then, youc an open or close the
door manually. #
Vehicles with comple tesliding door trim:
re mo vethec over from release cat ch2.
Service ope ratio nisa ccessible. #
Todisconnect the sliding doo rfromt he
electric mo tor:tur nrelease catch 2180°
clockwise.
The "MAN" position is set. #
Tounlo ck:pull lo cking pin 3upwards man‐
ually or use thec ent rallockin gbutton to
unlo ckthes liding door (/ page44). #
Press but ton1. #
Open or close thes liding door wit hthe out‐
side/inside door handle. #
Toconnect thes liding door tothee lectric
mo tor:tur nrelease catch 2180° counter-
clockwise.
The "AUTO" position is set. #
Adjus tthe sliding door (/ page49).
If it is no tpossible to rectifythe malfunction: #
Visit aq ualified specialis tworks hop. Re
setting thee lectric sliding door Slidin
gdoor buttons on thec enter console Sliding door button on
thed oor sill (B-pillar)
Yo um ustrese tthe sliding door if ther eh as been
am alfunction or avoltag esuppl yinter ruption. Opening and closing
49

Opening/closing
ther ear-en ddoor sfromt he
inside The
0036 symbol indicates that ther ear-end door
is unloc ked. #
Tounlo ck:slidelatch 2 tothel eft.
The 0036 symbol is visible. #
Toopen: pull opening le ver1up and open
th er ear-end door. #
Swing ther ear-end door tothes ide until it
engages. #
Toclose: makesuret hat thel eftr ear-end
door is closed. #
Pull ther ight rear-en ddoor firm ly closed by
th ed oor handle. #
Tolock: slide latch 2tother ight
The 0037 symbol is visible. Pa
rtition sliding door Opening and closing
thep artition slidin gdoor
from thed rive r's compa rtment &
WARNING Risk of becoming trapped due
to non-engaged pa rtition sliding door
If th eo pen partition sliding door is not
engaged, it can mo veon its ownw hile the
ve hicle is in motion.
This can cause youoro ther people to
become trapped. #
Befor edriving, alw aysc lose thep arti‐
tion sliding door and ensur ethat it is
engaged. #
Toopen: turnthe keyc ounter-clockwise 3.
The sliding door is unloc ked. #
Slide thes liding door tother ight 2asfaras
it willg o. #
Toclose: slidethes liding door tothel eft 1
until it engages.
Yo uc an loc kthe sliding door wit hthe key. Opening and closing
thep artition slidin gdoor
from thec argo compa rtment #
Toopen: pushthel eve rtot heright 3.
The sliding door is unloc ked. #
Slide thes liding door tothel eft 1 asfaras
it willg o. #
Toclose: slidethes liding door tother ight
2 until it engages. Openin
gand closing 51

ATA
(Anti-Thef tAlarms ystem) Fu
nction of ATA(Anti- theftA larms ystem)
If th eA TAsystem is armed, avisual and audible
alar mist riggered in thef ollowing situations:
R aside door is opened
R ther ear-end door is opened
R theh ood is opened
R thei nterior motion sensor is triggered
(/ page57)
R thet ow -awa ya larmist riggered
(/ page56)
ATA is automaticall yarmed af tera pproxima tely
fi ve seconds in thef ollowing situation:
R afte rt he vehicle has been loc kedw itht he
Sma rtKey When
theA TAsystem is armed, indicator lamp
1 flashes in theo verhead cont rolp anel.
AT Aisa utomatica llyd eactivated in thef ollowing
situations:
R Afteru nlocking thev ehicle wit hthe Smart‐
Ke y.
R Afterp ressing thes tart/s topb utton wit hthe
Sma rtKe yinside thev ehicle.
Arming/disarming ATA(Anti- theftA larms ys‐
te m)
If th ea larms ystemisa rmed, avisual and audible
alar mist riggered in thef ollowing situations:
R Adoor is opened
R The hood is opened
% The alar
misnotdeactivated, evenify ou
immediatel yclose theo pen door that has
triggered it, fore xamp le. Arming #
Close all thed oors. #
Lockthe vehicle wit hthe SmartK ey.
Indicator lamp 1intheo verhead cont rol
panel flashes.
Disarming #
Unloc kthe vehicle wit hthe SmartK ey.
Indicator lamp 1intheo verhead cont rol
panel goes out.
% The
vehicle loc ksagain automaticall yifyou
do no topen adoor within 40 seconds af ter
unlo cking thev ehicle.
St opping thea larm #
Press the0036 or0037 button on theS mart‐
Ke y.
or #
Press thes tart/s topb utton wit hthe Smart‐
Ke yinside thev ehicle.
The alar mstops. Fu
nction of thet ow -awa ya larm Fu
nction of thet ow -awa ya larm
Av isual and audible ala rmis triggered if thei ncli‐
nation of thev ehicle changes when thet ow -away
alar misa ctivated. This can be thec ase if the
ve hicle is raised on one side, fore xamp le. 56
Opening and closing

Arming/disarmin
gthe tow- aw ay alarm Arming/disarming
#
Lockthe vehicle wit hthe key.
The tow- aw ay alar misa utomaticall yarmed
af te ra bou t40s econds: #
Open thev ehicle wit hthe key.
The tow- aw ay alar misd eactivated.
The tow- aw ay alar miso nlya rmed when thef ol‐
lowing components ar eclosed:
R thed rive r's door and thef ront-passenger
door
R thes ide doors
R ther ear-end doors
Deactivating #
Switc hoffthep ower supply (/ page103). #
Press bu tton 1.
When theb utton is released, indicator lamp
2 intheb utton lights up fora pproxima tely
fi ve seconds. #
Lockthe vehicle wit hthe key.
The tow- aw ay alar misd eactivated.
The tow- aw ay alar mremain sdeactivated until
yo ul ockt he vehicle again.
Deactivat ethe tow- aw ay alar mw hen lockin gyour
ve hicle in thef ollowing situations:
R when loadinga nd/or transportin gthe vehicle
on aferry or car transpor ter,fo re xamp le
R when parkin gthe vehicle on amovable sur‐
fa ce, suc hasas plit-levelg arage
This will pr eventfalse alarms. Interior motion sensor
Fu
nction
If th ea ctivated thei nterior motion sensor de tects
motion in thev ehicle interior ,avisual and acous‐
tic alar mistriggered. This can happen if some‐
one reaches int othe vehicle interior ,for example. Ac
tivating/deactivatin gthe in terior motion
sensor Ac
tivating #
Close thes ide windo ws. #
Mak esuret hat no thing (suc hasmascotsor
coat hangers) is hanging on thei nside rear‐
vie wm irro roront he grab handles on the
headliner .This will pr event false alarms. #
Lockthe vehicle wit hthe key.
The interior motion sensor is activated af ter
appr oximately 30 seconds.
The interior motion sensor is onl yactivated when
th ef ollowing components ar eclosed:
R thed rive r's door and thec o-driver door
R thes ide doors
R ther ear-end doors
Deactivating #
Unloc kthe vehicle wit hthe key.
The interior motion sensor automatically
switches off.
Deactivating #
Switc hoffthep ower supply (/ page103). Opening and closing
57

#
Press button 1.
When theb utton is released, indicator lamp
2 intheb utton lights up fora bou tfives ec‐
onds. #
Lockthe vehicle wit hthe key.
The interior motion sensor is deactivated.
The interior motion sensor remains deactivated
until youl ockt he vehicle again.
Deactivat ethe interior motion sensor when lock‐
ing your vehicle in thef ollowing situations:
R ifth er ea repeople or animals remaining
inside
R ifth es ide windo wsremain open
R when transporting thev ehicle on aferry or
car transpor ter,fo re xamp le
This will pr eventfalse alarms. 58
Opening and closing

#
Adjus tthe seat int othe desired position. #
Press memor ybutton Mtogether wit hone of
th ep rese tp osition buttons 1,2or3.
An acou stic signal sounds .The settings are
st ored. #
Tocall up: press and hold ther ele vant preset
position button 1,2or3u ntilthef ront seat is
in thes tore dp osition. Ro
tating thef ront seats &
WARNING Risk of inju ryor deat hifthe
driver's seat and front-passenge rseat
ar en otengaged
If th ed rive r's and front-passenger seats are
no te ngaged in thed irection of tr avelduring
th et rip, ther estraint sy stems cann otoffer
pr otection as intended. #
Enga gethed rive r's and front-passenger
seat in thed irection of tr avel befor ethe
engine is star ted. &
WARNING Risk of inju ryfrom adju sting
th ev ehicle settings while thev ehicle is in
motion
Yo uc oul dlose control of thev ehicle in the
fo llowing situations:
R ifyo ua djus tthe driver's seat, theh ead
re stra int ,the steering wheel or them irror
while thev ehicle is in motion
R ifyo uf asteny our seat belt whilet hevehi‐
cle is in motion #
Befor estarti ngthee ngine: adjus tthe
driver's seat, theh ead restra int ,the st
eering wheel or them irro ra nd fast en
yo ur seat belt. Yo
uc an rotate thed rive r's and front-passenger
seat 50 °and 180°.T he seats engag ebothin
and opposit etothe direction of tra velasw ell as
at 50 °totheexit. #
Ensur ethat thep arking brak eisapplied and
th eb rake leve risf olded down wardsasf ar as
it will go (/ page133). #
Adjus tthe steering wheel in suc hawaythat
th er eiss ufficient free space torotate and
adjus tthe driver's seat (/ page71). #
Slide thef ront-passen gers eat forw ardb efore
ro tating it (/ page 59). #
Torotat ethe sea t:push le ver1towa rds
th ev ehicle center and rotat ethe seat slightly
in wa rds.
The rotatio nd eviceisu nlocked. #
Release le ver1again. #
Rotate thes eat byaround 50 °outwa rdsor
in wa rdsi ntot he requ ired position. Seat
sand stow age 65

#
Toattac hthe co vers of them ounting
shells: hold cover3suchthat retainin glug
1 is pointing towa rdsr ear seat anchorage
2. #
Inser tcover 3 intor ear seat anchorage 2
by pushing it down wardsatana ngle and then
clip it tothem ounting shell. #
Afterr emoving ther ear benc hseat, ensure
th at ther ear benc hseat can stand securely
and do no ttip ove rwhen in storage.
Installing ther ear benc hseat
Secur eengagement of ther ear benc hseat is
guaranteed only if youk eep thes eat anchorages
clean and free of objects.
% In
vehicles regis tere dasp assenger vehicles,
obser vethem aximum permitted number of
seats. #
Remo vethec ove rsof them ounting shells as
described under "Removing ther ear bench
seat". #
Ensur ethat ther ea reno object sinthe seat
anchorages and mounting shells. #
Position theb enc hseat behind thei nstalla‐
tion position. #
Hold theb enc hseat bytheg rabh andles and
tilt it backwards. #
Rollth eb enc hseat forw ards on thel evel
plastic car riers. #
Ensur ethat ther ear legs of theb enc hseat
ar ee ngaged. #
Tilt th eb enc hseat forw ards firm lyuntil the
loc kson thef ront legs of theb enc hseat
engag eaudibly.
The loc kson thef ront legs of theb enc hseat
will no wbelockeda nd ther ed indicator tabs
on theh ousing of release handle 1should
no longer be visible.
% If
th er ed indicator tabs on ther elease handle
housing ar evisible, theb enc hseat is no tcor‐
re ctly engaged.
If th eb enc hseat is no tcorrectl ye ngaged, you
can rectify this situation as follo ws: #
Unloc kthe benc hseat again and tilt it for‐
wa rdsf irml yuntil thel oc ks on theb enc hseat
front legs engag eaudibly. #
Attach thec oversoft he mounting shells as
described under "Removing ther ear bench
seat". Ad
justin gthe seat backres toftherear ben ch
seat Seats and
stowage 69

pants). The
values ar especified on thev ehi‐
cle identification plat eonthe B-pillar.
R thel oad mus tnotprotru de abo vetheu pper
edg eoft he seat backrests.
R if possible, alw ayst ranspor tthe load in the
cargo compa rtment.
R fastenthel oad tothet ie-down eyes and
spread thel oad as evenl yasp ossible.
R use tie-down eyes and fastening components
whic haresuitable fort he weight and size of
th el oad. Overvie
wofthe front stowage compa rtments Overvi
ewofthef ront sto wage compa rtments
Obser vethen otes on loading thev ehicle
(/ page72). 1
Lockable compartmen tabove windshield
(/ page73)
2 Windshield stowagec ompartment wit htwo
cup holde rs/ashtr aystow ages pace
St ow agec ompartment wit hcover,d epending
on specification (/ page73)
3 Center co nsole stow agec ompartment with
US Bc onnection, chargin ginter face, NFC
inter face and 12-V soc ket
4 Stow agec ompartment abo vewindshield
(subject toam aximum load of 5lb(2.5k g))
5 Front-passenger stowagec ompartment (sub‐
jec ttoa maximum load of 11lb (5 kg))
6 Cup holder
7 Stow agec ompartment in thed oors Opening and closing
thec enter console/
windshield stowage compa rtment St
ow agec ompartment co ver(ex ample: cen ter
console) #
Toopen: press button 2onstow agec om‐
partment 1.
The co verfolds upwards. #
Toclose: fold thec over down wards.
% The windshield
stowagec ompartment shave
ac over,d epending on thes pecification.
Opening and closing thel oc ka ble compart‐
ment abo vethew indshield
Yo uc an loc kand unlo ck thestowa ge compart‐
men twitht he emergency key( /pag e42).
Opening #
Tounlo ck:turnthe emergency keyc lock wise
to position 0049. #
Slide handle 1upwards in thed irection of
th ea rrow. #
Swivelthe co veru pwards.
Closing #
Foldthec ove rdow nwards and slide handle
1 down wardsint he direction of thea rrow. Seats and
stowage 73

#
Tolock: turnthe emergency keyc ounter-
clo ckwise toposition 0048.
Opening thee yeglasses compa rtment #
Press button 1. Bottle holder
1
Bottle holde rinthe front door s(example: co-
driver's door) Cup holder
Opening
thec up holder in ther ear passenger
compa rtment &
WARNING Risk of inju rywhen getting
out, du etoextende dcup holder
If th ec up holder in ther ear passenger com‐
partment is extende dwheny ou ar egetting
out, youm aybum pintoi t. #
Befor egetting out, slid ethe cup holder
bac kunder ther ear benc hseat. #
Toopen: press cup holder 1or2. #
Fold out thec up holder. #
Toclose: slide cup holder 1or2 bac kin
until it engages. Asht
raya nd cigar ette lighter Using asht
rays While driving
#
Place thec losed ashtr ayinac up holder in
th ew indshield stowagec ompartment swhile
driving. #
Chec kthat thea shtra yisseated securely.
% Do no
tplace thea shtra yinthe center con‐
sole cup holders. It canno tsit securely here.
Opening #
Fold co ver1upwards. 74
Seats and stowage

#
Lowb eam/perime terl ights: pull ba ck
housing co ver1. #
Pullo utthes ockettow ards ther ear. #
Remo vetheb ulb from thes ocket. #
Inse rtthen ew bulb int othe soc kets ucht hat
th eb ase of theb ulb restsf ullya gains tthe
base of thes ocket. #
Align and inser tthe soc ket. #
Attach housing co ver1. #
High beam/daytime running lights: pull
bac khousing co ver2. #
Turn thes ocketc ounter-clo ckwise and pull it
out. #
Remo vetheb ulb from thes ocket. #
Inse rtthen ew bulb int othe soc kets ucht hat
th eb ase of theb ulb restsf ullya gains tthe
base of thes ocket. #
Inse rtthes ocketa nd tur nitclock wise. #
Attach housing co ver2. #
Turn signal indicator: #
Turn soc ket 3counter-clo ckwise and
re mo veit. #
Gently tur nthe bulb counter-clockwise and
ta ke it out of thes ocket. #
Inse rtthen ew bulb int othe soc keta nd tur nit
clo ckwise. #
Inser tsocket 3and tur nitclock wise.
Ad ditional tur nsignal light
Re quirements:
R Ad
ditional tur nsignal light (all-wheel
driv evehicles): bulb typeP21W #
Switching of fthe lighting sy stem. #
Unscr ewscrews 1and remo velens 2. #
Gently tur nthe bulb counter-clockwise and
ta ke it out of thes ocket. #
Inse rtthen ew bulb int othe soc keta nd tur nit
clo ckwise. #
Place lens 2in position and tigh tent he
scr ews 1. Re
placing rear light bulb s(Cargo Vana nd
Pa ssenger Van) Overvie
wofrear bul btypes (Cargo Vana nd
Pa ssenger Van)
Yo uc an chang ethe following bulbs. Ve
hicles wit hstandar dtail lamps
1 Brak elights/tail lamps/pe rime terl ights:
P21W
2 Reversing lights: P21W
3 License plate lamp:W5W
4 Rear fogl ights: P21W
Yo uc an chang ethe following bulbs. Light and vision
85