ignition MERCEDES-BENZ V-CLASS MPV 2021 Owner's Manual
[x] Cancel search | Manufacturer: MERCEDES-BENZ, Model Year: 2021, Model line: V-CLASS MPV, Model: MERCEDES-BENZ V-CLASS MPV 2021Pages: 337, PDF Size: 9.88 MB
Page 105 of 337

Using
the ashtr ayand cigar ette lighter in the
re ar passen ger co mpartment Re
quirements
R The ignition is switched on. #
Pull down the co ver. #
Touse the cigar ette lighter: press cigar ette
lighter 2.
The cigar ette lighter will pop out when the
heating element is red-hot. #
Toremo vethe ashtr ay:press ribbing 1
and remo veinsert 3. #
Toinsert the ashtr ay:push in insert 3
from ab oveand press it into the holder until it
engages. Using
the cigar ette lighter in the front centre
console &
WARNING ‑ Risk of fire and injury from
th e hot cigar ette lighter
Yo u can burn yourself if youto uch the hot
heating element or the soc ket of the cigar ette
lighter.
In addition, flammable materials may ignite if:
R you drop the hot cigar ette lighter
R ach ild holds the hot cigar ette lighter to
objects, forex ample #
Always hold the cigar ette lighter bythe
knob. #
Always make sure that the cigar ette
lighter is out of reach of children. #
Never lea vechildren unat tended in the
ve hicle. Re
quirements:
R The po wer supp lyhas been switched on. Cigar
ette lighter in the cent reconsole (e xamp le:
centre console with co ver) #
Slide co ver1 ofthe cent reconsole up wards
( / page 96). #
Press in cigar ette lighter 2.
% Yo
u can use the cigar ette lighter soc ketfor
accesso ries with a maximum cur rent dr awof
18 0 W (15 A). Soc
kets Using the
12V so cket inthe front centre con‐
sole Re
quirements:
R The po wer supp lyhas been switched on.
R Only devices with up toa maximum of
18 0wa tts (15 A) are pe rmissible. #
Slide co ver1 ofthe cent reconsole up wards
( / page 96). #
Fold up co ver2 ofthe soc ket. #
Inse rtthe plug of the device. 102
Seats and stowage
Page 106 of 337

Using
the soc ket in the rear centre console Re
quirements
R The po wer supply has been switched on.
R Only devices with up toa maximum of 180 W
(15 A) are permissible. #
Pull down the co ver. #
Fold out the co ver of soc ket1. #
Inse rtthe plug of the device. Using
the 230 V soc ket &
DANG ER Risk of fata l injury due todam‐
aged connecting cable or soc ket
Yo u could receive an electric shock when
pulling the connecting cable or the 230 V
po we r soc ket out of the trim, or if it is dam‐
aged or wet. #
Use only connecting cables that are dry
and free of damage. #
When the ignition is switched off, make
sure that the 230 V po wer soc ket is dr y. #
Immedia tely ha ve the 230 V po wer
soc ketch ecked or replaced at a quali‐
fi ed specialised workshop if it is dam‐
aged or has been pulled out of the trim. #
Never plug the connecting cable into a
230 V po wer soc ketth at is damaged or
has been pulled out of the trim. &
DANG ER Risk of fata l injury due toincor‐
re ct handling of the soc ket
Yo u could receive an electric shock in pa rticu‐
lar:
R ifyo ure ach into the soc ket.
R ifyo u insert unsuitable devices or objects
into the soc ket. #
Do not reach into the soc ket. #
Only connect suitable devices tothe
soc ket. &
DANG ER Risk of fata l injuries from elec‐
tric shock
Yo u could getan electric shock if you clean
th e 230 V soc ket wi thawe t clo th.
There is a risk of fata l injur y.
Omit the area around the 230 V soc ket when
cleaning. Re
quirements
R Only connect devices with a suitable plug
which con form sto thest andards specific to
th e count ryyou are in.
R Onlydevices with a maximum po wer con‐
sum ption of 150 W (15 A) may be connected.
R Do not use multiple soc ket outlets.
R The on-boa rdelectrical sy stem voltage is
within a permissible voltage range.
R The electronic device plug is inse rted fully
into the 230 V soc ket. #
Open flap 2. Seats and
stowage 103
Page 107 of 337

#
Insert the plug of the device into 230 V
soc ket3.
When the on-board electrical sy stem voltage
is suf ficient, indicator la mp1lights up.
When you are not using the 230 V po wer soc ket,
ke ep theflap closed. Swit
ching there frigerator box in the centre
console on and off &
WARNING Risk offire due toa co vered
ve ntilation grille on the coolbox
If yo u co verth eve ntilation grille forth e cool‐
box, it may overheat. #
Always make sure that theve ntilation
grille is not co vered. The coolbox
ventilation grille is between the front
seat base and the cent reconsole sid ewall.
Re quirements
R The ignition is switched on.
R The stow age compartment under the armrest
is open (/ page 96). The
refrigerator box can bear a maximum load of
3.5 kg. #
Toopen: fold co ver1 upwards. #
Toswitch the cooling le velto low: press
button 2for appro ximately two seconds. #
Toswitch the cooling le velto high: press
button 2again. #
Toswitch off: press button 2for appro x‐
ima tely two seconds until all indica tor lamps
go out. %
If
yo u do not need touse there frigerator box
fo r an extended pe riod, you should swit chit
off, defrost it and clean it. Af ter doing so,
lea vethe cap open for a time. Note
s on attaching the iPad ® Yo
ur vehicle is equipped with iPad ®
attachment
1 onthe driver's and co-driver's seat backrests.
A mount, which has been tested and appr oved
especially for Mercedes-Benz vehicles, is availa‐
ble as an accesso ry. Only this mount can unlock
th e attachment opening and allow the iPad ®
to
be charge d whilst it is ins talled.
iPad ®
attachment 1may only be used for
accesso ries up to42 W (3.5 A).
Contact a Mercedes-Benz Service Centre for
information and availabilit y.Before using the
mount, please read the operating instructions for
th e mount.
% Only use accessories which ha
vebeen tested
and recommended byMercedes-Benz. 104
Seats and stowage
Page 108 of 337

Exterior lighting
Note
s onchanging the lights when driving
abroad Low beam
In countries in which traf
fic drives on the oppo‐
site side of thero ad from the count ryin which
th eve hicle is regis tere d, you will ha vetoswitch
th e headlamps tosymmetrical dipped beam. This
will pr event oncoming traf fic from being dazzled.
Symm etrical dipped beam will no longer illumi‐
nate the edge of the car riag ew ay as far or as
high.
Ve hicles with halogen headlamps:
It is not necessa ryto change the headlamps over
to symmetrical dipped beam. The statutory
re qu irements of the count ries in which traf fic
drives on the opposite side of thero ad from the
country in whi chtheve hicle is regis tere d will also
be met without changing over.
Ve hicles with LED headlamps:
Yo u can set the low beam for driving on theright
or left via the on-board computer (/ page189). Infor
mation about lighting sy stems and your
re sponsibility The
vehicle's various lighting sy stems are only
aids. The vehicle driver is responsible for adjust‐
ing theve hicle's lighting tothe pr evailing light,
visibilit y,statutory conditions and traf fic condi‐
tions. Light switch
Operating the light switch
0047
0063 Left pa rking lights
0048 0064 Right parking lights
0049 0060 Standing lights and licence plate and
instrument lighting
004A 0058 Automatic driving lights (prefer red light
switch position)
004B 0058 Low beam or high beam
6 005E Rear fog light
7 005A Front fog lamp
If yo u hear a warning tone when exiting theve hi‐
cle, the lights may still be on. #
Turn the light switch to0058 .
The exterior lighting (e xcept standing and parking
lights) will automatically swit choff in thefo llow‐
ing cases:
R ifyo ure mo vetheke y from the ignition loc k.
R ifyo u open the driver's door while theke y is
in position 005Ainthe ignition loc k.
Switching on the daytime running lights #
Turn the light switch to0058 .
Au tomatic driving lights function
The standing lights, low beam and daytime run‐
ning lights will be switched on auto matically
depending on the ignition status and the light
conditions. Light and vision
105
Page 119 of 337

#
Screw soc ket2 into the lamp housing by
turning it clo ckwise. #
Place the lamp housing in position at the side
of red lens 1and engage it. Wi
ndscreen wipers Switching
the windscreen wipers on and off Re
quirements:
R The po wer supp lyhas been switched on. 0047
005AWindscreen wipe rsoff
0048 0062 Intermittent wiping, low
(low rain sensor sensitivity)
0049 0063 Intermitte nt wiping, high
(high rain sensor sensitivity)
004A 00AA Continuous wiping, slow
004B 00A9 Continuous wiping, fast #
Turn the combination switch tothe cor re‐
sponding position 0047–004B. #
Single wiping: pushthe button on the combi‐
nation switch in the direction of ar row 6. #
Washing: pushthe button on the combina‐
tion switch in the direction of ar row 6 asfar
as the second point of resis tance. Switching the
rear window wiper on/off Re
quirements
R The po wer supply has been switched on. 0047
00E2 Wiping with washer fluid
0048 00AA Inte rm ittent wiping
0049 005ARear wind owwiper off
004A 00E2 Wiping with washer fluid #
Movethe00C5 switch tothe cor responding
position.
When there ar wind owwiper is swit ched on,
th e on-board computer will show the00C5
symbol on theAssistance graphic menu. #
Towipe with washer fluid: push the00C5
switch be yond its cur rent position as far as it
will go towa rds0047 or004A and hold it there. Re
placing the windsc reen wiper blades &
WARNING Risk of becoming trapped if
th e windscreen wipers are switched on
while wiper blades are being replaced
If th e windscreen wipers begin tomo vewhile
yo u are changing the wiper blades, you can
be trapped bythe wiper arm. #
Always switch off the windscreen wip‐
ers and ignition before changing the
wiper blades. *
NO
TEDama getothe windscreen or rear
wind owduring wiper blade replacement If
th e wiper arm on the windscreen or rear
wind owisfolded back before a wiper blade
has been fitted, the window may be damaged
by thefo rc e of the impact. 11 6
Light and vision
Page 121 of 337

Re
placing the rear window wiper blade Ta
ilgate #
Fold wiper arm 1away from there ar win‐
dow until it engages in there placement posi‐
tion. #
Hold wiper arm 1firm lyand pull wiper blade
2 offthe wiper arm in the direction of the
ar row. #
Place new wiper blade 2on wiper arm 1. #
Hold wiper arm 1firm lyand push wiper
blade 2inthe opposite direction tothe
ar row until it engages. #
Make sure that wiper blade 2is seated cor‐
re ctly. #
Fold wiper arm 1back onto there ar win‐
do w. Mir
rors Operating
the outside mir rors &
WARNING Risk of injury ifve hicle set‐
tings are adjus ted while theve hicle is in
motion
Yo u could lose control of theve hicle in partic‐
ular in thefo llowing situations:
R Ifyo u adjust the driver's seat, the head
re stra ints, thesteering wheel or the mir‐
ro r while theve hicle is in motion.
R Ifyo ufast enyour seat belt while theve hi‐
cle is in motion. #
Before starting the engine: adjust the
driver's seat, head restra ints, steering
wheel and mir ror in particular and fas‐
te nyo ur seat belt. &
WARNING Risk of accident due tomis‐
judgement of dis tance when using the
outside mir ror
The outside mir rors reflect objects on a
smaller scale. The objects in view are in fact
closer than they appear. #
Therefore, alw ays look overyo ur shoul‐
der in order toensure that you are
aw are of the actual dis tance between
yo u and thero ad users driving behind
yo u. Ad
justing the outside mir rors electrically #
Swit chon the po wer supp lyor the ignition. #
Press button 3or4 toselect the outside
mir rorto be adjus ted. #
Set the position of the mir rorgl ass using but‐
to n2.
Fo lding the electric outside mir rors in/out
* NO
TEDama getothe electric outside
mir rors If
yo ufo ld the electric outside mir rors in or
out manuall y,yo u may damage the outside
mir rors and they will not lock in place prop‐
er ly.
If th e outside mir rors are not folded in when
wa shing theve hicle in a car wash, thewa sher
brushes may fold them in forc ibly and dam‐
age them. #
The outside mir rors must only be folded
in and out elect rical ly. #
Foldthe outside mir rors in before wash‐
ing theve hicle in a car wash. 11 8
Light and vision
Page 122 of 337

#
Switch on the po wer supp lyor the ignition. #
Brief lypress button 1.
Yo u will no lon ger be able tofold in the outside
mir rors once youre ach a speed greaterth an
47 km/h.
En gaging the outside mir rors
If an outside mir ror has been forc ibly disen gaged
fo rw ards or backwards, proceed as follo ws. #
Press and hold button 1until you hear a
click follo we dby the mir ror audibly engaging
in position.
The mir ror housing will now be engaged and
yo u will be able toadjust the outside mir rors
as normal.
Re setting the outside mir rors
% If
th e battery has been disconnected or com‐
ple tely discharged, the outside mir rors must
be reset. Only then will the automatic mir ror
fo lding function workproperly. #
Switch on the po wer supp lyor the ignition. #
Brief lypress button 1.
Heating the outside mir rors
Ve hicles without a rear window heater: at
te mp eratures below 15°C, the mir ror heater will
automatically switch on permanently once the
engine has been star ted.
Ve hicles with a rear window heater: attemp er‐
atures below 15°C, the mir ror heater will auto‐
matically switch on forte n minu tes once the
engine has been star ted. The mir ror heater can
also be switched on toget her with there ar win‐
dow heater. #
Swit chon the ignition. #
Press theto p or bottom section of the006C
rock er switch on the cont rol panel forth e air
conditioning.
The indicator lamp abo vethe006C rock er
switch will light up and the mir ror heater will
be switched on toget her with there ar wind ow
heater. Operating sun visors
#
Glare from front: Foldthe sun visor 1
down wards. #
Glar e from the side: Swivelthe sun visor 1
to the side.
% The sun visor can only be mo
vedto the side
fo rve hicles without a window airbag. Light and vision
11 9
Page 125 of 337

Ve
hicles without a hot-water auxiliary heater (stationary hea ter)
Fr ont operating unit:
1 0082 Setsthete mp erature on the left
(/ page 124)
2 008F Setsthe air distribution (/ page123)
3 H Setsthe air flow ( /page 123)
4 0058 Sets clima tecontrol toautomatic mode
(/ page 123)
5 0064 Demists the windscreen (/ page124)
6 Calls up the air conditioning menu of the
multimedia sy stem
004B Switches residual heat utilisation
on/off (/ page125)
7 006C Switches there ar wind owheater and
mir ror heater on/off (/ page125)
8 005A Switches cooling with air dehumidifica‐
tion on/off ( /page 122)
9 0072 Switches air-recirculation mode on/o ff
manually (/ page124)
A 00A4 Calls up the air conditioning menu of
th e multimedia sy stem forth ere ar air condi‐
tioning sy stem
B 0082 Setsthete mp erature on theright
(/ page 124)
Re ar operating unit:
C 0082 Setsthete mp erature (/ page124)
D Displ ay
E 0097 Setsthe air flow ( /page 123) Operating cli
mate control sy stems Switching
the clima tecontrol sy stem on/off #
Swit chon the ignition. #
Toswitch on: presstheto p or bottom sec‐
tion of the! rocker switch.
The multimedia sy stem air conditioning menu
will open.
or #
Set the air flow toleve l0047 or higher using the
H rocker switch. #
Toswitch off: presstheto p or bottom sec‐
tion of the! rocker switch.
or #
Set the air flow toleve l005A using theH
rock er switch.
% When climate contro
l is switched off, "OFF"
will appear on the display of there ar operat‐
ing unit.
% When
theve hicle is star ted, the climate con‐
trol settings most recently selected will be
adop ted automaticall y. Switching
the A/C function on/off Re
quirements
R The climate control sy stem has been
switched on (/ page122).
R The engi ne isrunning.
When the "Cooling with air dehumidification"
function is switched on, the air inside theve hicle
is cooled and dehumidified according tothete m‐
perature selected.
The function can be activated or deactivated only
in the climate cont rol menu and not in the cli‐ 12 2
Climate cont rol
Page 128 of 337

Con
venience opening/closing &
WARNING Risk of entrapment due tonot
paying attention duri ng convenience clos‐
ing
When the con venience closing feature is
operating, parts of the body could become
trapped in the closing area of the side win‐
do ws. #
When the con venience closing feature is
operating, monitor the entire closing
process and make sure that no body
parts are in the closing area. &
WARNING Risk of entrapment from the
con venience opening feature
During con venience opening pa rts of the
body could be dr awn in or become trapped
between the side window and window frame. #
When opening, make sure that nobody
is touching the side windo ws. #
If someone becomes trapped, immedi‐
ately press the0062 button in the door
to open the side windo ws.
The side windo ws stop. #
Tocontinue closing the side windo ws,
pull on the0062 button. #
Con venience closing with the air recircu‐
lation rocker switch: press and hold the
0072 rocker switch up or down until the side
windo wsclose au tomatically.
The indica tor lamp abo vethe0072 rock er
switch lights up. The initial position of the
side windo wsis sa ved. Air-recirculation mode
is activated.
If yo u open the side windo wsmanually af ter
closing them with the con venience closing
fe ature, they will open automatically as far as
th est art position before the con venience
closing. #
Conve nience opening with the air-recircu‐
lation rocker switch: press and hold the
0072 rocker switch up or down until the side
windo wsopen automatically.
The indicator lamp abo vethe0072 rock er
switch goes out. Air-recirculation mode will
be deactivated. #
Pre-entry climate control and con veni‐
ence opening with theke y:press and hold
th e0036 button on thekey.
The side windo wsopen automatically and the
blo wer of the climate cont rol sy stem is activa‐
te d. Switching
there ar window heater on/off The
rear wind owheater consumes a lot of elec‐
tricity. You should therefore switch off there ar
wind owheater as soon as there ar wind owis
clear. #
Swit chon the ignition. #
Press theto p or bottom of the006C rocker
switch.
If th e indicator lamp abo vethe006C rock er
switch lights up, there ar wind owheater is
switched on.
The rear wind owheater will switch off automati‐
cally af ter a few minutes. Switching
there sidual heat utilisation on/off When
the engine is switched off, it is possible to
make use of there sidual heat of the engine to
heat or ventilate theve hicle interior for appro x‐
ima tely 30 minutes. The heating or ventilation
time depends on the set vehicle interior temp era‐
ture. #
Switch off the engine or remo vethekey. #
Toswitch on: presstheto p or bottom sec‐
tion of the! rocker switch.
When residual heat utilisation is switched on,
th e indicator lamp abo vethe! rocker
switch will light up.
The blo wer will run at a low speed rega rdless
of the air flow setting.
If th e "Residual heat" function is switched on
at high outside temp eratures, only thest a‐
tionary ventilation will be switched on. The
bl owe r will then run at medium speed. #
Toswitch off: presstheto p or bottom sec‐
tion of the! rocker switch again.
The indicator lamp abo vethe! rock er
switch goes out. Climate control
12 5
Page 129 of 337

Re
sidual heat utilisation will switch off automati‐
cally in thefo llowing cases:
R afte r a running time of appr oximately
30 minutes
R ifth est ar ter battery's charge status is too
low
R when the ignition is switched on
R when the hot-wa ter auxiliary heater is
switched on Operating air
vents Ad
justing the air vents &
WARNING Risk of burn s and frostbite
due tobeing too close tothe air vents
Ve ry hot or very cold air can flow from the air
ve nts. #
Makesure that all vehicle occupants
alw ays maintain a suf ficient dis tance
from the air vents. #
If necessa ry, direct the air flow to
ano ther area of theve hicle interior. Ad
justing the centre air vents #
Toopen/close: turn controller 3or4 to
th eright or left as far as it will go. #
Toadjust the airflow direction: hold centre
air vent 1 or2 bycontroller 3or4 and
mo veit up or down or tothe left or right. Ad
justing the side air vents: #
Toopen/close: turn controller 2tothe
ri ght or left as far as it will go. #
Toadjust the airflow direction: hold side air
ve nt 1 bycontroller 2and mo veit up or
down or tothe left or right.
Opening/closing there ar air vents: 1
Adjustment wheel forve rtically adjusting and
re gulating air flow
2 Adjustment wheel for horizontally adjusting
air flow
The air vents can be adjus ted only on vehicles
with rear-compartment air conditioning. #
Toopen: turn adjustment wheel 1ofthe
re ar air vent tothe cent reposition. #
Toclose: turn adjustment wheel 1tothe
upper or lo wer end position. Au
xiliary heating Information about auxiliary heating
&
DANG ER Risk of fata l injury due topoi‐
sonous exhaust gases
If th eta ilpipe is bloc ked or suf ficient ventila‐
tion is not possible, poisonous exhaust gases
such as carbon monoxide may enter theve hi‐
cle. This is the case in enclosed spaces or if
th eve hicle getsst uck in sn ow,fo rex ample. 12 6
Climate cont rol