tow MERCEDES-BENZ V-CLASS MPV 2021 Repair Manual

Engaging
reve rsege ar R #
Depress the brake pedal and push the
DIRECT SELECT le ver upwards past thefirst
point of resis tance.
Selecting neutral N &
WARNING Risk of accident and inju ry
when neut ral position engaged
The vehicle can rollaw ay ifth e parking brake
is not applied and you park theve hicle with
th e neutral position 005Cengaged.
There is a risk of accident and injur y.#
Before pa rking theve hicle, apply the
parking brake. #
Press the brake pedal and the DIRECT
SELECT le ver upwards or down wardsto the
fi rs t point of resis tance.
% When
you swit choff the engine, the 7-speed
automatic transmission automatically shifts
into neutral 005C.
Re leasing the brake pedal will allow youto mo ve
th eve hicle freely, forex ample, topush it or tow
it.
If th e automatic transmission should also
st ay in neutral 005C 005Cwhen the ignition is
switched off, proceed as follo ws: #
7-speed automatic transmission: leavethe
ke y in the ignition loc k. #
9-speed automatic transmission: start the
ve hicle. #
Depress the brake pedal and engage neutral
005C. #
Release the brake pedal. #
Switch off the ignition and lea vetheke y in
th e ignition loc k.
Engaging pa rkposition P #
Press the005D button on the DIRECT SELECT
le ve r when theve hicle is stationar y.
Pa rk position 005Dis engaged automatically when
one of thefo llowing conditions is me t:
R You swit choff the engine in transmission
position 005Bor005E (9-speed automatic trans‐
mission).
R Ifyo ure mo vetheke y from the ignition loc k.
R You open the driver's door when theve hicle is
st ationary or when driving at a very low speed
and in transmission position 005Bor005E. Engaging drive position D #
Depress the brake pedal and push the
DIRECT SELECT le ver down wards past the
fi rs t point of resis tance.
The au tomatic transmission shifts thro ugh the
individual gears automatically when it is in trans‐
mission position 005B. This is determ ined bythe
fo llowing factors:
R The drive program selected(/ page 144)
R Shif tra nge is limited (/ page 143)
R Position of the accelerator pedal
R Driving speed
Ro cking theve hicle free
This function is only available forve hicles with 7-
speed automatic transmission.
At speeds of up to9 km/h, you can swit ch
between transmission positions 005Band 005Ewith‐
out applying the brakes. This helps when rocking
th eve hicle free out of snow or slush. #
Push the DIRECT SELECT le ver alternately
upwards and down wards past thefirs t point
of resis tance. Re
stricting the shift range Re
quirements
R transmission position 005Bis engaged
(/ page 143).
R drive prog ram A;or Cis selected
(/ page 145). #
Torestrict the shift range: briefly pull the
st eering wheel gearshift paddle 1.
The automatic transmission shifts tothe next
lo we rge ar, depending on thege ar cur rently
engaged. The shi ftrange is also restricted.
The shi ftrange selected is shown in the multi‐
function displa y.The automatic transmission
shifts only as far as the selected gear. Driving and parking
14 3

*
NO
TETransmission damage caused by
ro lling in neut ral position If
th e engine is switched off and theve hicle
ro lls in neut ral position (e.g. when towing),
th is can cause damage tothe driv etra in and
transmission. #
Only allow theve hicle toroll brief lyin
th e neutral position. Depending on
the transmission, the automatic
transmission switches totransmission position
005D (9-speed au tomatic transmission) or005C (7-
speed automatic transmission) when switching
off the engine. The po wer transmission between
th e engine and transmission is inter rupte d in
transmission position 005C. Inthis case, shift the
automatic transmission totransmission position
005D before switching off the engine when theve hi‐
cle is stationar y.Obser vethe messages on the
multifunction displa y.App lythe parking brake to
pr eve nttheve hicle from rolling away.
Obser vethefo llowing points toensure that the
ve hicle is properly secured against rolling away
unin tentionally. #
Always apply the parking brake. #
On uphill or downhill inclines: turnthe
front wheels towa rdsth eke rb. #
Vehicles with manual transmission:
engage firs t or reve rsege ar. #
Vehicles with automatic transmission:
engage transmission position 005D.#
Turn theke yto position 005Aand switch off the
engine. Electric parking brake
Information on
the electric pa rking brake &
WARNING Risk of accident and inju ry
due toleaving children unat tended in the
ve hicle
If ch ildren are left unat tended in theve hicle,
th ey could, in part icular:
R open doors, thereby endangering other
persons or road users.
R get out and be stru ck byoncoming traf fic.
R operate vehicle equipment and become
trapped, forex ample. In addition,
thech ildren could also set the
ve hicle in motion by,fo rex ample:
R releasing the parking brake.
R changing the transmission position.
R starting theve hicle. #
Never lea vechildren unat tended in the
ve hicle. #
When leaving theve hicle, alw aysta ke
th eke y with you and lock theve hicle. #
Keep theve hicle key out of there ach of
ch ildren. Fo
rth e automatic functions towo rkcor rectl y,the
driver must be seated in the cor rect seat position
(/ page 69).
% The electric parking brake is only actually
applied when
there d0024 indicator lamp
lights up continuousl y.
Au tomatically applying the electric parking
brake
When youre mo vetheke y from the ignition lock
when theve hicle is stationar y,the parking brake
is applied automaticall y.
The red0024 indicator lamp in the multifunction
display lights up. The electric parking brake is
only actually applied when there d0024 indicator
lamp lights up continuousl y.
Re leasing the electric pa rking brake automat‐
ically
Ve hicles with automatic transmission:
The electric parking brake of your vehicle is
re leased when all of thefo llowing conditions are
fulfilled:
R the co-driver seat is occupied
R the seat belt tongue of the seat belt is inser‐
te d into the driver's seat belt buckle
R the engine is running
R you shift the transmission toposition 005Bor
005E
Ve hicles with manual transmission:
The electric parking brake of your vehicle is
re leased when all of thefo llowing conditions are
fulfilled:
R the co-driver seat is occupied
R the seat belt tongue of the seat belt is inser‐
te d into the driver's seat belt buckle
R the engine is running Driving and pa
rking 151

In
theStandard setting, no warning vibration
occurs in thefo llowing situations:
R you operate the turn signal in the cor respond‐
ing direction. In this eve nt,thewa rnings are
suppressed for a cer tain period of time.
R a driving saf ety sy stem inter venes or regu‐
lates, such as ABS, BAS or ESP ®
.
In theAdaptive setting,there will also be no
wa rning vibration in thefo llowing situations:
R you accelerate hard, e.g. kickdown.
R you brake hard.
R yousteer actively, e.g. swer vetoavo id an
obs tacle or change lane quickl y.
R you cut the corner on a sharp bend. Tr
ailer operation Note
s on trailer operation &
WARNING Risk of accident and inju ryif
th eto ngue weight is exceeded
The car rier sy stem may de tach from theve hi‐
cle, thereby endangering other road users. #
Always comply with the permissible
to ngue weight when using a car rier. Yo
u can find specifications rega rding the ball
neck on the trailer's identification plate. You can
fi nd specifications rega rding the trailer on the
to wing vehicle's identification plate and in the
Te ch nical Data (/ page 277).
Yo u can attach car rier sy stems such as a bicycle
ra ck or load-bearing implement tothe ball nec k.
When using car rier sy stems on the ball nec k,the
maximum load capacity is 75kg.
If th e trailer coupling is de tachable, it is essential
to comply wi th the operating instructions of the
trailer coupling manufactu rer.
Place your vehicle/trailer combination on sur fa‐
ces that are as even as possible and secu reit
against rolling away ( /page 150). Couple and
uncouple the trailer carefull y. No
tethefo llowing rega rding theto ngue weight:
R Make full use of the maximum tongue weight,
where possible.
R Neverfa ll below a legally prescribed minimum
to ngue weight; theto ngue weight must
alw ays be positive.
R Do not exceed or fall below the permissible
to ngue weights – this must be obser ved dur‐
ing loading and unloading of the trailer.
Do not exceed thefo llowing values:
R Perm itted braked or unbraked towing capa‐
city
The maximum permissible towing capacity for
unbraked trailers is 750kg.
R Perm issible rear axle load of theto wing vehi‐
cle
R Perm issible grossweight of theto wing vehi‐
cle
R Perm issible grossweight of the trailer
R Perm issible gross combination weight
R Maximum permissible speed of the trailer
The releva nt pe rmitted values, which must not be
exc eeded, can be found in thefo llowing places:
R Inyour vehicle documents
R Onthe identification plate of the trailer hitch
R Onthe trailer's identification plate
R Ontheve hicle identification plate
If th ere are discrepancies between theva lues, the
lo west one shall appl y.
Before driving off, ensure thefo llowing:
R The tyre pressure on there ar axle of theto w‐
ing vehicle has been set forth e maximum
load.
R The headlamps ha vebeen set cor rectl y.
Comply with the maximum permissible speed of
80 km/h or 100 km/h, even in countries in
which higher speeds are pe rmitted forve hicle/
trailer combinations.
% During trailer operation,
remember that
PA RKTRONIC is available only toa limited
ex tent, if at all.
% The height of
the ball head will change
depending on theve hicle's load. In this case,
use a trailer with a height-adjus table dr aw‐
bar. 176
Driving and pa rking

Ve
hicles with a detachable trailer coupling
Re duce therisk of damage tothe trailer coupling
and cont ribute toenvironmen tal pr otection. If you
do not need the ball nec k, removeit from the ball
neck mount and fit its co ver in there ar bumper
(/ page 177). Only with the co verfitted can the
emission values indicated forre al operation be
achie ved.
% During trailer operation,
the permissible
gross vehicle weight is inc reased by100kg
fo rve hicles regis tere d as passenger vehicles.
The maximum permissible rear axle load
must be obse rved. Fi
tting the co verfo r trailer coupling #
Inse rtthe co verflush into there cess on the
re ar bumper and press it upwards against the
bumper co vering at the latching points on the
outside right and left. #
Turn fast eners from position 0047toposition
0048. #
Ensure that thefast eners are fully engaged
and firm lyin position 0048. At
taching the ball neck &
WARNING Danger of accident‑ and inju ry
due toincor rectly ins talled and secured
ball coupling
If th e ball coupling has not engaged, it can
become de tach ed during driving and endan‐
ge rot her road users. #
Engage the ball coupling as described
and ensure that it is securely ins talled. &
WARNING Danger of accident due to
non-engaged ball coupling
If th e ball coupling has not engaged, the
trailer can become de tach ed. #
Always engage the ball coupling as
described and ensure that it is securely
ins talled. Re
quirements
R Trailer hit chkey #
Notethe number of theke yth at belongs to
th e ball neck of the trailer hitch.
Wi th th is numbe r,yo u will receive a replace‐
ment key at a Mercedes-Benz service centre.
% Depending on
theve hicle equipment, the
holder forth e ball neck on theve hicle can be
pr otected with a co ver in the bumper. #
Release the two quick- re lease fasteners for
th e co ver in the bumper and remo vethe
co ver (/ page177). #
Take the ball neck of the trailer hitch out of
th estow age space on theright-hand side in
th ere ar and stowthe co veraw ay. #
Unlock lock6in handwheel 1with thekey.
Re d mark 3onthe handwheel must be
aligned with green area 2on ball neck 4
(fitting position). #
Ifre d mark 3is not aligned with green area
2, unlock lock 6in handwheel 1with the
key. #
Pull handwheel 1outwards. Turn red mark
3 into green area 2of ball neck 4until
handwheel 1engages. #
Slide ball neck 4vertically into the holder
until it audibly engages.
The ball neck will lock automaticall y.Green
mark 3on handwheel 1is aligned with
green area2on ball neck 4. Driving and parking
17 7

Only if
the green mark on the handwheel is
aligned with the green area on the ball neck is
th e ball neck securely engaged. #
Lock lock 6in handwheel 1with thekey. #
Remo vetheke y and place cap 5on lock 6.
The ball ne ckis securely ins talled only if the
ball neck can be loc ked and theke yre mo ved. #
Store the trailer hitch key in a safe place, e.g.
in theve hicle document wallet.
If yo u cannot remo vetheke y,the ball neck may
be dirty. #
Remo vethe ball neck (/ page178) and
clean it ( /page 229).
If yo ustill cannot lock the ball neck af ter cleaning
it, the trailer hitch is damaged. #
Remo vethe ball nec k.
Safe trailer ope ration is not guaranteed. The
ball neck mu stno longer be used for trailer
operation. #
Have the trailer hitch checked at a qualified
specialist workshop. Re
moving the ball ne ck Re
quirements
R Trailer hit chkey #
Remo vecap 5from lock 6in handwheel
1. #
Unlock lock 6in handwheel 1with th ekey. #
Hold ball neck 4in place. #
Pull handwheel 1outwards. Turn red mark
3 on handwheel 1into green area 2of
ball neck 4until handwheel 1engages.
Pa y attention tothe pictogram on handwheel
1. #
Pull ball neck 4out down wards. #
Ifth e ball neck is dirty, clean it
(/ page 229). %
Depending on
theve hicle equipment, the
holder forth e ball neck on theve hicle can be
pr otected with a co ver in the bumper. #
Store the ball neck with theke y inser ted in
th estow age space on theright-hand side in
th ere ar and remo vethe co verfo rth e ball
neck holder. #
Insert the co ver in the lo wer section of the
bumper and tighten the two quick- re lease fas‐
te ners forth e co ver (/ page177). Coupling/uncoupling a
trailer Re
quirements
R The ball neck must be engaged in a securely
locked position.
Tr ailers with 7-pin plugs can be connec tedto the
ve hicle using thefo llowing adap ters:
R Adapter plug
R Adapter cable
Coupling a trailer
* NO
TEDama getothest ar ter battery due
to full discharge Charging
the trailer battery using the po wer
supply of the trailer can damage thest ar ter
batter y. #
Do not use theve hicle's po wer supply
to charge the trailer batter y. 1
Eyeletfor break away cable
The eyelet on the ball neck is used exclusively for
attaching the trailer break away cable. You must
not attach a tow rope, a tow bar or anything simi‐
lar totheey elet. The eyelet has not been
designed for such a load and may tear. #
Shiftthe transmission toposition 005D. #
Apply theve hicle's parking brake. #
Close all the doors. 17 8
Driving and pa rking

Re
setting values
The values of thefo llowing functions can be
re se t:
R Trip dis tance
R "Fro m start" trip computer
R "Fro m reset" trip computer
R ECO display #
Press the00E2 button tocall up the list of
menus. #
Use the0064 or0063 button toselect the
Trip menu. #
Press the0076 button. #
Use the0064 button toselect Yesand con‐
fi rm with the0076 button.
If th e ECO display values are reset, theva lues in
th e "F rom start" trip computer will also be reset.
If th eva lues in the "F rom start" trip computer are
re set, the ECO display values will also be reset. Na
vigation menu In
theNavi menu, the display sho wsnavigation
instructions from the multimedia sy stem. #
Switch on the multimedia sy stem. #
Press the00E2 button tocall up the list of
menus. #
With th e0064 or0063 button, select the
Navi menu. #
Press the0076 button toconfirm.
Ro ute guidance not active 1
Direction of tr avel
2 Name of cur rent road
Ro ute guidance active No
change of direction announced
1 Distance tothe next destination
2 Expected ar riva l time
3 Distance tothe next change of direction
4 Name of cur rent road Change of direction announced with lane
recom‐
mendation
1 Road towhich thech ange of direction leads
2 Distance tothech ange of direction
3 Change-of-direction symbol
4 Recommended lane and new lane du ring a
ch ange of direction (white)
5 Possible lane (light gr ey)
6 Lane not recommended (da rkgrey)
If th e digital map contains the cor responding
data, lane recommendations for upcoming
ch anges of direction can be displa yed in the case
of multi-lane roads. New lanes may be added dur‐
ing thech ange of direction.
Lane not recommended 6: inthis lane, you will
not be able tocomple tethe next change of direc‐
tion without changing lane.
Po ssible lane 5: inthis lane will you be able to
comple tethe next change of direction.
Re commended lane 4: inthis lane, you will be
able tocomple teboth th e next change of direc‐
tion and the one af terth at. In
stru ment clus ter and on-board computer 18 5

Chan
geof direction without lane recommenda‐
tion
1 Road towhich thech ange of direction leads
2 Distance tothech ange of direction and dis‐
ta nce indica tor graphic
3 Change-of-direction symbol
When a change of direction is made, you will see
dis tance indica tor graphic 2in addition to
ch ange-of-direction symbol 3. This willreduce
in size from bottom to top as you approach the
announced change of direction. When the dis‐
ta nce indica torru ns out, thech ange of direction
will begin. Change of direction with lane
recommendation
1 Road towhich thech ange of direction leads
2 Distance tothech ange of direction and dis‐
ta nce indica tor graphic
3 Change-of-direction symbol
4 Lane recommendation
The following additional navigation status dis‐
pla ysare possible:
R New route... orCalculating route…
A new route is being calculated.
R Road not mapped
The vehicle's position is within the area of the
digital map, but thero ad is not kn own, e.g.
unpa vedro ads (off- road).
R No route No
route tothe selected destination could be
calculated.
R 004B
You ha vereached the destination or an inter‐
mediate destination. Ra
dio menu 1
Frequency band
2 Channel with preset position
3 Artist's name
4 Name of track #
Switch on the multimedia sy stem. #
Press the00E2 button tocall up the list of
menus. #
Use the0064 or0063 button toselect the
Radio menu. #
Press the0076 button toconfirm.
The display will show thest ation cur rently
selected 2. #
Toopen thest ation lis t:briefly press
th e0064 or0063 button. #
Toselect a station in thest ation lis t:
brief lypress the0064 or0063 button. #
Toselect a station in thest ation list with
ra pid sc roll: press and hold the0064 or
0063 button. #
Toselect a frequency band or station
memor y:brief lypress the0076 button. #
Use the0064 or0063 button toselect a fre‐
qu ency band or station memor y. #
Press the0076 button toconfirm.
% Yo
u can find fur ther information, e.g. about
saving stations and about DABra dio mode
(Digital Audio Broadcasting) in "Radio" . Media menu
#
Switch on the multimedia sy stem. 18 6
Instrument clus ter and on-board computer

Information about Mercedes PRO (Mercedes
me)
Mercedes-Benz Vans vehicles support thefo llow‐
ing telematics solutions depending on what is
selec ted:
R Mercedes PRO
R Mercedes me
When you ha veregis tere d and logged in with a
user account tothe Mercedes PRO Portal or
Mercedes me Portal, then services and of fers
from Mercedes-Benz Vans will be available to
yo u.
Av ailability of Mercedes PRO is countr y-depend‐
ent. You can check theav ailability of Mercedes
PRO in your country in the Mercedes PRO Portal:
http://www.mercedes.pro
Av ailability of Mercedes me is countr y-depend‐
ent. You can check theav ailability of Mercedes
me in your country in the Mercedes me Portal:
http://www.mercedes.me
Fo r more information on Mercedes PRO or
Mercedes me contact a Mercedes-Benz service
centre or visit the Mercedes PRO Portal or
Mercedes me Portal. Information about Mercedes PRO connect
(Mercedes me connect)
Mercedes PRO connect or Mercedes me connect
is the connectivity product from Mercedes-Benz
th at intelligent lyconnects your vehicle with your
smartphone, your tablet or your PC. You can then
call up diverse information about your vehicle at
any time, forex ample, or control specific vehicle
functions remo tely.
Among stothers, Mercedes PRO connect or
Mercedes me connect pr ovide thefo llowing serv‐
ices:
R Breakdown Management (breakdown assis‐
tance call button)
In theeve nt of a breakdown, you can use the
breakdown assis tance call button in theove r‐
head control panel tomake a call tothe
Mercedes-Benz Cus tomer Centre
(/ page 192).
Yo u can also select a menu ent ryinthe multi‐
media sy stem (/ page191).
R Info call/General question about your vehicle
(Info call button), if available Use
the Info call button in theov erhead con‐
trol panel tomake a call tothe Mercedes-
Benz Cus tomer Centre (/ page192).
R Mercedes-Benz Emer gency call sy stem (SOS
button)
Use the0053 button (SOS button) in the
ov erhead cont rol panel tomake a call tothe
Mercedes-Benz emergency call centre
( / page 192).
R Accident Recovery
Ac cident Recovery isavailable foryo u as a
supplement tothe Mercedes-Benz emer gency
call sy stem. If desired, at the conclusion of an
emer gency call, your call is forw arded tothe
Mercedes-Benz Cus tomer Centre, so you can
ha ve your vehicle towe daw ay toa Mercedes-
Benz service centre, forex ample
(/ page 192).
The Mercedes-Benz Cust omer Centre andthe
Mercedes-Benz emer gency call centre are availa‐
ble foryo u around the clock forth e use of the
services. Obser vethe legal requ irements forthe
country in whi chyou are stay ing.
To use the services in your vehicle, thefo llowing
conditions must be me t:
R Your vehicle is in an area with suf ficient GSM
network co verage.
R The ignition is switched on.
More information on Mercedes PRO and
Mercedes PRO connect and thera nge of services
of fere d can be found in the Mercedes PRO sup‐
plement at: https://moba.i.daimler.com/
mar kets/ece-r ow/baix/truc ks/mercedespro/
en_GB/index.html
Fu rther information about Mercedes me and
Mercedes me connect and thera nge of services
of fere d can be found in the Mercedes me supple‐
ment at: https://moba.i.daimler.com/mar kets/
ece-r ow/baix/ca rs/connectme/en_GB/
#emotions/S tartseite.html Calling
the Mercedes-Benz Cus tomer Centre
using the multimedia sy stem
Multimedia sy stem:
4 © 5
Phone 5
g #
Call Mercedes PRO connect orMercedes me
connect.
Wi th your appr oval, theve hicle transmits the
re qu ired data tothe Mercedes-Benz Cus‐ Mercedes PRO
191

to
mer Centre. The data transfer is shown in
th e media displa y.
Then, you can select a service in thevo ice selec‐
tion menu and be connec tedto a specialist at the
Mercedes-Benz Cus tomer Centre.
Yo u can find information on thefo llowing topics:
R Vehicle breakdown or accident
R Activation of Mercedes PRO connect or
Mercedes me connect or questions about the
connectivity product
R Que stions about theve hicle or about opera‐
tion of theve hicle
R Nearest Mercedes-Benz service centre
R Other products and services from Mercedes-
Benz Making a call via
theove rhead control panel 1
Breakdown assis tance call button
2 Coverfo r0053 button (SOS button)
3 0053 button (SOS button)
4 Info call button #
Tomake a breakdown assistance call:
press button 1.
Making an eme rgency call #
Brief lypress the co ver on 0053 button 2to
open it. #
Press and hold 0053button 3for at least
one second.
Making an Info call #
Press button 4. An emer
gency call can be initia tedeve n if a
breakdown assis tance or Info call is acti ve. This
has priority over all other active calls. Information on
the breakd own assistance
call via the overhead control panel
A call tothe Mercedes-Benz Cus tomer Centre
using the breakdown assis tance button has been
initia ted via theove rhead cont rol panel:
In theeve nt of a breakdown, you will get suppor t:
R Aqu alified tech nician car ries out repairs on
site and/or theve hicle will be towe dto the
nea rest Mercedes-Benz service centre
Yo u may be charge dfo rth ese services.
Data is transmit ted during the connection tothe
Mercedes-Benz Cus tomer Centre (/ page192). Giving permission
for data trans fer
Re quirements:
R There is an active breakdown assis tance call
(/ page 192).
The Do you want to transmit vehicle data and
the vehicle's position to the Mercedes-Benz Cus-
tomer Centre in order to improve the processing
of your request? messageappears. #
Select Yes.
Re leva nt identi fication da tais transmitted
automaticall y. Tr
ansmitted data during a service call
In cer tain countries you must con firm the data
transfer.
The following requ irements must be met for data
transmission:
R The ignition is switched on.
R The necessary data transmission tech nology
is suppor tedby the mobile network pr ovider.
R A suf ficient mobile phone connection quality
is pr ovided.
The data transfer red when calling depends on the
services activated and the type of call made:
R General information about theve hicle
R Accident and breakdown assis tance
R Service appointment agreement 19 2
Mercedes PRO

Entering a destination
Multimedia sy
stem:
4 © 5
Navigation 5
ª Where to? 1
Country in which theve hicle is located
2 Enters a POI or address
Underneath: Multimedia sy stem suggestions
during destination entry
During inpu t:dele tethe entry with£.
3 List with additional destination ent ryoptions
During destination entry: select sear chresult
4 Dele tes entered character
5 0076 Confirms an entry
6 Calls up handwriting recognition
7 Enters a space
8 Activates voice input
9 Sets the written language
A Switches tonumbers, special characters and
symbols
B Swit ches toupper-case or lo wer-case letters #
Enter the destination in 2. The entries can
be made in any order.
The following ent ries can be made, forex ample:
R Town, stre et, house number
R Street,to wn
R Postcode
R POI name or POI catego ry
R Con tact name #
Select a sea rchre sult in list 3. #
Calculate thero ute (/ page 203). %
Yo
u can find fur ther information about desti‐
nation entry , e.g. 3wordaddresses, in the
Digital Owner's Manual.
Changing the country #
Select the count ryindicator in 1. #
Enterth e count ryindicator. #
Select the count ryin3.
Using online sear ch
% Re
quirements: the media display sho wsan
In te rn et connection with a double-arrowsym‐
bol in thest atus line.
% Online sear
chis not available in all countries.
Destination ent ryuses online map services. If the
on-board sear chfinds no suitable dest inations or
if yo uch ange countries, the online sear chisavail‐
able.
Fo rth e destination you can enter an address, a
POI or a thre e-word address. #
Select count ryindicator 1. #
Select the pr ovider forth e online service from
th e count ries list. #
Ente rth e destination in 2.
The sear chresults are displa yed. #
Select the destination in list 3.
The de tailed view forth ero ute is displ ayed.
or 202
MBUX multimedia sy stem