tow bar MITSUBISHI 3000GT 1991 Service Manual

ENGINE - Piston and Connecting RodII-47
6EN0223
Side rail
Side rail end
7EN249
7EN250
ldentiftcation mark embossed
No. 1
7Barrel
weldenthcation mark
Tapered
we7EN013i
LI(7) Check that the piston moves smoothly.
8. INSTALLATION OF OIL RING
(1) Fit the oil ring spacer into the piston ring groove.
NOTEOn the side rail and the spacer, no difference exists
between the upper and the lower surfaces.
(2) Attach the side rail on the upper side. When attaching
the side rail, engage one side of the side rail with the
piston groove. If pressed with a finger, as shown in the
illustration, it should enter easily.
NOTEThe side rail may be broken like other piston rings if the
gap is opened by the ring expander.
(3) In the same procedure as Step
(2), position the side rail
on the lower side.
(4) Check that the side rail smoothly rotates in both
directions.
7.INSTALLATION OF PISTON RING No. 2 / 6. PISTON
RING No.1
(1) Using a piston ring expander, position the No.2 and
No.1 piston rings.
Identification mark: No.1
No.2
NOTE
T
T2(1) Keep in mind that Nos.1 and 2 are different in shape.
(2) Assemble the Nos.1 and 2 piston rings with the
manufacturer and size marks stamped on the side
facing upward (toward the piston top).
TSB Revision