automatic transmission MITSUBISHI COLT 2008 Owner's Manual (in English)

Starting and driving4-25
4
Automated manual transmission
E00612500025
An automated manual transmission is a transmission in which
operation of the clutch and shifting of gears are performed
automatically under electronic control. The transmission has 6
forward gears and 1 reverse gear.
It is possible to choose between
an automatic mode and a man-
ual mode by using the allshift lever (A). ● Manual mode: The driver ef fects gearshifts using the
allshift lever, and the clutch is controlled automatically.
● Automatic mode: Gearshifts take place automatically in
accordance with the vehicle speed, and the clutch is con-
trolled automatically.
The currently selected shift po sition, manual mode or auto-
matic mode is indicated on the allshift indicator display (B).
AB

4-26 Starting and driving
4
Allshift lever position and allshift indicator displayE00612600042
Allshift indicator displayAllshift lever positionDescription
N (Neutral) Power is not transmitted. This is the only position in which the engine can
be started.
R (Reverse) This position is used for reversing.
S (Stand by) automatic
mode* Gearshifts are performed automatically at all vehicle speeds (from a stand-
ing start right up to highway speeds).
through manual
mode* + (UP
SHIFT) Shift up
Gearshifts can be performed from 1st gear to 6th
gear using the allshift lever.
- (DOWN
SHIFT) Shift down
or S (Stand by)The indicator shows the recommended gearshift points for fuel-efficient
driving.
N (Neutral) or
R (Reverse) or
S (Stand by) If you do not depress the brake pedal when moving the selector lever from
the “N” (Neutral) position to the “S” (Stand by) position (or vice versa) or
from the “N” (Neutral) position to the “R” (Reverse) position (or vice
versa), the indicator w
ill show that a gearshift has not taken place.
*: When the allshift lever is moved from the “S” (Stand by) positi on to the “A” (Auto) position, the transmission switches to the auto-
matic mode or to the manual mode.

4-28 Starting and driving
4
NOTE●You must have the brake pedal firmly depressed when
moving the allshift lever. If you only move the allshift
lever (without depressing the brake pedal), a gearshift will
not take place. At this time, a “0” will appear on the
allshift indicator display to show that a gearshift has not
taken place. Depress the brake pedal to cause the gearshift
to take place. The allshift indicator display will show the
selected gearshift position.
Choosing between automatic mode and manual modeE00612800044
Automatic mode or manual mode can be selected whether the
vehicle is stationary or in motion.
When the allshift lever is pl aced in the “A” (Auto) position
from the “S” (Stand by) position, the transmission switches
from automatic mode to manual mode or vice versa and the
currently selected mode is i ndicated on the allshift indicator
display. In automatic mode, “A” is shown, and in manual
mode, “1 through 6” is shown on the allshift indicator display.
NOTE● When you turn the ignition switch to the “ACC” or
“LOCK” position, the mode selection used up to that
point will be erased. When you subsequently turn the igni-
tion switch to the “ON” position, a mode will automati-
cally be selected as follows:
• 1500 models (5-door models , petrol-powered vehicles):
automatic mode
• Except for 1500 models (5-door models, petrol-powered
vehicles): manual mode
through or

Starting and driving4-29
4
Performing gearshifts (manual mode)E00612900058
1. Select manual mode using the allshift lever. Refer to“Choosing between automatic mode and manual mode”
on page 4-28.
2. While holding th e accelerator pedal steady, move the
allshift lever in the + (UP SHIFT) or - (DOWN SHIFT)
direction. The currently select ed gear is indicated on the
allshift indicator display. + (UP SHIFT)
Push the allshift lever forw ard once to shift up one gear.
- (DOWN SHIFT) Push the allshift lever back ward once to shift down one
gear.
NOTE● During vehicle operation, the transmission automatically
shifts down when the vehicl e speed decreases. It selects
1st gear just before the vehicle reaches a standstill.
through
UP SHIFT DOWN SHIFT
CAUTION!
●To maintain good runnin g performance, the trans-
mission may refuse to perf orm an upshift when the
allshift lever is moved to the “+ (SHIFT UP)” posi-
tion at certain vehicle speed s. Also, to prevent over-
revving the engine, the lever is moved to the “-
(SHIFT DOWN)” position at certain vehicle speeds.
●Hard engine braking and sharp acceleration can
cause the tyres to slip on the road surface. Perform
downshifts in a manner a ppropriate for the current
road conditions and vehicle speed.

4-30 Starting and driving
4How to drive a vehi
cle with automated
manual transmission
E00613000014
Starting from a standstillE00613100057
1. Depress the brake pedal with your right foot.
2. Place the allshift lever in the “S” (Stand by) position if
you wish to drive forward an d in the “R” (Reverse) posi-
tion if you wish to reverse. Confirm that either an “A”, a
“1” or an “R” is shown by th e allshift indicator display.
NOTE●If the brake pedal is not depressed when the allshift lever
is moved, a gearshift will not take place. At this time, the
driver is notified by a “0” on the allshift indicator display.
Depress the brake pedal to cause the gearshift to take
place. The allshift indicator display will show the selected
gearshift position.
3. Choose between automatic mode and manual mode with the allshift lever. Refer to “Choosing between automatic
mode and manual mode” on page 4-28.
4. Confirm safety around the vehi cle, then release the park-
ing brake.
5. Start moving by gradually easing off the brake pedal
while gently applying pressu re to the accelerator pedal.
NOTE●When driving away on a slippe ry road, push the allshift
lever forward into the “+ (UP SHIFT)” position from the
“S” (Stand by) position. This causes the transmission to
shift into the 2nd gear which is better for smooth driving
away on a slippery road. At th is time, the allshift indicator
display shows “2”. Push the allshift lever to the “-
(DOWN SHIFT)” side to shift back to the 1st gear.,or

Starting and driving4-33
4
WaitingE00613300046
1. With the allshift lever in the “S” (Stand by) position,firmly depress the brake pedal.
2. If necessary, apply the parking brake.
3. When you are stationary for a long period (for example,
when stuck in a traffic jam), place the allshift lever in the
“N” (Neutral) position. 4. When you are ready to start moving again, first confirm
that the allshift lever is in the “S” (Stand by) position or
“R”(Reverse) position and that an “A”, “1”, or “R” is
shown on the allshift indicator display.
NOTE● During vehicle operation, the transmission automatically
shifts down when the vehicl e speed decreases. It selects
1st gear just before the vehicle reaches a standstill.CAUTION!
●On an uphill slope, the tr ansmission’s creep effect
may not stop the vehicle from rolling backward if
the brakes are not applied. There is no creep effect
while 2nd gear is selected. When stopping, be sure to
depress the brake pedal and securely apply the
parking brake.
● Do not attempt to hold the vehicle in place on an
uphill road in 1st gear by depressing on the accelera-
tor pedal. The transmission could malfunction if you
do.
CAUTION!
● Continue to pay attention to the vehicle while sta-
tionary. If you allow your attention to wander and
the allshift lever is in an y position other than “N”
(Neutral), the vehicle co uld move suddenly and
unexpectedly.
CAUTION!
● The actions described below cause rapid clutch wear
and can cause clutch dama ge. Do not perform them.
• Depressing the brake and accelerator pedals at the
same time.
• Holding the vehicle in place on an uphill road by
depressing the accelerator pedal (and not depress-
ing the brake pedal) with 1st gear selected.

For pleasant driving5-17
5
Air conditioning switchE00703500798
Push the switch, and the air conditioning compressor will start
working. The air conditioning indicator lamp (A) will come on.
Push the switch agai n and the air conditioning compressor will
stop working and the indicator lamp goes off.
Operating the air conditioning systemE00704100078
Heating
Set the mode selection dial to the “ ” position and set the air
selection switch (A) to the outside position.
Turn the temperature control dial clockwise or anticlockwise to
the desired temperature. Sel ect the desired blower speed.
NOTE●For maximum heat, set the bl ower speed at the 3rd posi-
tion.
CAUTION!
● When using the air conditi oning, the idling speed
may increase slightly as the air conditioning com-
pressor is switched on/off automatically. While the
vehicle with an automated manual transmission is
stationary, fully depress th e brake pedal to prevent
the vehicle from creeping.

For emergencies6-3
6
2. You could be injured if the vehicles move. Set the parkingbrake firmly on each vehicle. Put an automatic transmis-
sion in “P” (PARK) or a manua l transmission and an auto-
mated manual transmission in “N” (Neutral). With an
automated manual transmission vehicle, confirm that “N”
is shown by the allshift indicator display. Turn off the
ignition switch.
NOTE● Turn off all lamps, the heater and other electrical loads.
This will avoid sparks and help save both batteries.
3. Make sure battery electrolyte is at the proper level. Refer to “Battery” on page 8-15. 4. Connect one end of one jump lead to the positive (+) ter-
minal of the discharged battery (A), and the other end to
the positive (+) terminal of the booster battery (B).
Petrol-powered vehicles


WARNING!
● Turn off the ignition on both vehicles beforehand.
Take care to ensure that the cables or your clothes
cannot be caught by the fan or drive belt. Personal
injury could result.
WARNING!
● If electrolyte fluid is not vi sible, or appears to be fro-
zen, Do Not Attempt Jump Starting!
A battery might rupture or explode if the tempera-
ture is below freezing point or if it is not filled to the
proper level.
Except for vehicles with turbocharger

For emergencies6-43
6
Operation under adve
rse driving conditions
E00801701390
If your vehicle becomes stuck in sand, mud or
snow
If the vehicle becomes stuck in snow, sand, or mud, it can often
be moved by a rocking motion. Fo r vehicles with manual trans-
mission, move the gearshift leve r alternately between 1st and
Reverse, while applying slight pressure to the accelerator
pedal.
With an automated manual transmission vehicle, place the
allshift lever in the “A” (automatic mode) position to select
automatic mode or select 1st or 2nd gear in the manual mode or
place the allshift lever in th e “R” (Reverse) position for
reverse. Confirm that there is an “A”, “1”, “2” or “R” in the
allshift indicator display, then gently press the accelerator
pedal. Do not press the acceler ator pedal while moving the
allshift lever.
Avoid racing the engine or spinning the wheels. Prolonged
efforts to free a stuck vehicl e may result in overheating and
transmission failure. Allow the engine to idle for a few minutes
to let the transmission cool between rocking attempts.
If the vehicle remains stuck afte r several rocking attempts, seek
other assistance.
WARNING!
● When attempting to rock your vehicle out of a stuck
position, be sure that the area around the vehicle is
clear of people and physic al objects. The rocking
motion may cause the vehicle to suddenly launch
forward or backward, causing injury or damage to
nearby people or objects.

Specifications9-17
9
Fuel consumption
E01101100313
Petrol-powered vehicles
Item
CombinedUrban conditionsExtra-urban
conditions
CO2
(g/km)
Fuel con- sumption
(L/100 km (62 miles)
CO2
(g/km)
Fuel con- sumption
(L/100 km (62 miles)
CO2
(g/km)
Fuel con- sumption
(L/100 km (62 miles)
1100
modelsWith 175/65R14 size tyres 130 5.5 165 7.0 110 4.6
With 195/50R15 or 205/45R16 size tyres135 5.7 172 7.3 115 4.8
1300
models
Manual transmission
With 175/65R14 size tyres 138 5.8 175 7.4 115 4.8
With 195/50R15 or
205/45R16 size tyres143 6.0 182 7.7 119 5.0
Automated manual
transmissionMan-
ual
modeWith 175/65R14 size tyres 133 5.6 172 7.3 110 4.6
With 195/50R15 or
205/45R16 size tyres138 5.8 178 7.5 119 5.0
1500
models
3-door
modelsExcept for vehicles with turbocharger 145 6.1 185 7.8 121 5.1
Vehicles with turbocharger 161 6.8 203 8.6 136 5.7
5-door
models
Manual transmission 148 6.2 190 8.0 122 5.1
Auto-
mated
manual
transmis-
sionManual mode140 5.9 180 7.6 117 4.9
Automatic mode 149 6.3 194 8.2 123 5.2