MITSUBISHI LANCER EVOLUTION 2007 Service Repair Manual

INDEX - In order of parts nameC-15
Wiring diagram
page Circuit diagram page Connector
No. Parts name
GG sensor (Lateral)D-33B-200,208,213,221,229,239B-31,33
G sensor (Longitudinal)D-32B-200,208,213,221,229,239B-31,33
HHazard warning switchC-03B-136,140B-18,24
Headlamp (HI:LH)A-16B-103,106B-6,8
Headlamp (HI:RH)A-28B-103,106B-7,9
Headlamp leveling switchC-36B-131,133B-19,25
High mounted stop lampF-05B-144,145B-38,39
Horn (HI)A-23B-146B-7,8
Horn (LO)A-25B-146B-7,9
Horn relayA-05XB-73,146B-6,8
Horn switch C-206B-146B-22,28
IIdle speed control servoB-115B-88,96B-12,16
Ignition coil 1B-114B-82,83B-12,16
Ignition coil 2B-119B-82,83B-12,16
Ignition coil relay or no
connection B-09XB-73,83B-10,14
Ignition switchC-201B-76B-22,28
Injector 1B-27B-89,97B-11,15
Injector 2B-26B-89,97B-11,15
Injector 3B-25B-89,97B-11,15
Injector 4B-24B-89,97B-11,15
Instrument panel wiring harness and
A/C wiring harness combinationC-107B-175,181B-20,26
Instrument panel wiring harness and
console wiring harness combinationD-15B-195B-31,32
Instrument panel wiring harness and
control wiring harness combinationC-128B-153,181,184,198,200,202,203,205,
206,208,209,211,213,214,216,217,
218,229,230,233,234,235,236,239,
242,243B-21,26
Instrument panel wiring harness and
control wiring harness combinationC-129B-79,80,83,87,89,93,95,97,101,142,
143,149,186,190,212,228,253B-21,26
Instrument panel wiring harness and
control wiring harness combinationC-130B-84,87,92,95,100,142,143,148,150,
152,154,157,175,178,198,200,201,
204,205,206,212,213,216,219,228,
229,232,235,237,252,254,255,256,
257B-21,27

INDEX - In order of parts nameC-16
Wiring diagram
page Circuit diagram page Connector
No. Parts name
IInstrument panel wiring harness and
control wiring harness combination
C-42B-216,234B-19
Instrument panel wiring harness and
control wiring harness combination
C-147B-209,210,215,223,224,225,231,241,
242,244B-27
Instrument panel wiring harness and
floor wiring harness (LH) combinationC-133B-114,121,126,138,143,144,145,159,
161,165,167,173,249,251B-21,27
Instrument panel wiring harness and
floor wiring harness (LH) combinationC-134B-216,224,234,235,244,245B-21,27
Instrument panel wiring harness and
floor wiring harness (LH) combination
C-45B-216,234B-19
Instrument panel wiring harness and
floor wiring harness (RH) combinationC-112B-111,120,134,142,143,144,145,159,
160,165,166,171,186,190,197,249,
251B-20,26
Instrument panel wiring harness and
floor wiring harness (RH) combinationC-146B-93,101,129,148,152,156,203,211,
217,225,233,243B-21,27
Instrument panel wiring harness and
front door wiring harness (LH) combina-
tionC-24B-162,163,165,170,172,173,192,193,
196B-18,24
Instrument panel wiring harness and
front door wiring harness (RH) com-
binationC-110B-159,168,169,170,171,172,192,193,
196B-20,26
Instrument panel wiring harness and
instrument panel wiring harness com-
bination C-35B-76,78,100,108,117,123,128,141,
154,164,165,172,180,185,189,205,
227,247,250,254B-25
Instrument panel wiring harness and
J/B combinationC-208B-54,55,126,129,256B-22,28
Instrument panel wiring harness and
J/B combinationC-209B-54,55,87,95,104,105,107,108,110,
111,112,115,116,118,122,125,128,134,
136,137,138,139,140,141,142,143,
149,153,158,164,170,172,174,180,
186,187,188,189,190,191,189,198,
202,206,210,218,222,226,236,240,
246,256B-22,28
Instrument panel wiring harness and
J/B combinationC-210B-54,55,76,77,78,82,83,84,87,95,104,
107,111,112,115,116,118,122,125,128,
136,137,140,141,142,143,149,153,
157,158,159,164,165,170,172,174,
180,185,186,187,190,191,192,193,
195,198,200,202,206,208,210,212,
213,214,218,220,221,222,226,228,
229,230,236,238,239,240,246,248,
250, 256B-22,28

INDEX - In order of parts nameC-17
Wiring diagram
page Circuit diagram page Connector
No. Parts name
IInstrument panel wiring harness and
J/B combinationC-211B-54,55,78,92,100,105,108,113,117,
119,123,125,128,137,141,150,154,
158,164,170,172,174,180,185,188,
189,204,205,219,227,237,247,248,
250,252,254B-22,28
Instrument panel wiring harness and
J/B combinationC-213B-54,55,78,82,83,84,87,92,95,100,
104,105,107,108,110,112,113,115,
116,117,119,120,121,123,125,126,
128,129,135,136,137,139,140,141,
149,150,153,154,157,158,164,170,
171,172,173,174,180,185,187,188,
189,191,192,193,195,198,200,204,
205,206,208,212,213,214,219,220,
221,222,227,228,229,230,237,238,
239,240,247, 248,250,252,254,256B-22,28
Intercooler water spray motorA-44B-256B-7,9
Intercooler water spray relayC-222B-54,55,256B-23,29
Intercooler water spray switchD-34B-257B-31,33
JJ/C (1)C-05B-56,62,93,101,104,107,111,112,115,
116,118,122,124,125,127,128,131,
133,136,137,140,141,148,152,153,
156,158,164,170,172,175,181,185,
187,191,194,195,196,197,212,214,
220,222,228,230,238,240,257B-18,24
J/C (2)C-102B-57,63,87,92,104,105,107,111,113,
115,119,124,126,127,131,136,140,
143,154,158,163,169,170,175,181,
187,188,191,192,202,204,210,218,
219,226,236,237,246,248,252,256,
258B-20,26
J/C (3)C-08B-58,64,95,104,105,107,108,112,113,
116,117,119,123,124,125,126,127,
128,129,131,133,136,137,140,141,
149,153,159,164,165,171,172,173,
175,180,181,185,187,188,189,191,
193,194,195,202,210,214,218,222,
226,227,230,236,240,246,247,253,
255,257,258B-18,24
J/C (4)C-26B-59,65,92,100,105,113,119,137,157,
158,170,188,194,197,201,204,205,
209,213,219,221,227,232,237,242,
247,250,252,254,258B-19,25
J/C (5) C-29B-60,84,87,104,112,125,137,149,150,
157,187,194,197,198,214,230,248,
256B-19
J/C (5) C-28B-66,100,108,117,123,141,164,172,
173,189,205,227,247,254B-25
J/C (6)C-108B-61,67,82,83,86,88,90,92,94,96,98,
100,102,149,153,176,182,198,204,
205,206,212,215,219,223,228,231,
237,241,252,253,254,255B-20,26

INDEX - In order of parts nameC-18
Wiring diagram
page Circuit diagram page Connector
No. Parts name
KKey reminder switchC-202B-253,255B-22,28
LLicence plate lamp (LH)F-13B-110,114B-38,39
Licence plate lamp (RH)F-12B-110,114B-38,39
Luggage compartment lampF-04B-119,123B-38,39
NNo connectionA-08XB-73B-6,8
No connectionA-34-B-9
No connectionB-07XB-73B-10,14
No connectionB-08XB-73B-10,14
No connectionB-10XB-73B-10,14
No connectionC-220B-54,55B-23,29
No connectionB-06XB-73B-10,14
No connectionC-225B-54,55,78B-23,29
No connection C-34-B-25
OOil pressure switchB-20B-157B-11,15
Outside/Inside air selection damper
control motor and potentiometerC-10B-175,181B-18,24
Oxygen sensorB-34B-88,96B-11,15
Oxygen sensor (Rear)D-22B-88,96B-31,33
PParking brake switchD-23B-157,201,209,213,221,232,242B-31,33
Power steering oil pressure switchA-48B-90,98B-7,9
Power window main switchE-07B-162,163,168,169B-34,36
Power window motor (Front:LH)E-05B-162,165B-34,36
Power window motor (Front:RH)E-20B-159,168B-35,37
Power window motor (Rear:LH)E-10B-161,167B-34,36
Power window motor (Rear:RH)E-25B-160,166B-35,37
Power window relayC-224B-54,55,158,159,165B-23,29
Power window sub switch (Passenger’s
side)E-19B-159,165B-35,37
Power window sub switch (Rear:LH)E-11B-161,167B-34,36
Power window sub switch (Rear:RH)E-24B-160,166B-35,37
Pressure sensor F-29B-216,224,234,244B-38,39
Proportioning valve (for ACD control)F-27B-216,224,235,245B-38,39
Proportioning valve (for AYC control)F-28B-235,245B-38,39

INDEX - In order of parts nameC-19
Wiring diagram
page Circuit diagram page Connector
No. Parts name
PPurge control solenoid valveB-23B-91,99B-11,15
RRadiator fan relayA-09XB-73,102,176,182B-6,8
Rear combination lamp (LH)F-16B-110,114,126,134,138,143,144,145B-38,39
Rear combination lamp (RH)F-09B-111,115,129,134,138,142,144,145B-38,39
Rear fog lamp relayC-219B-54,55,126,129B-23,29
Rear room lampD-05B-118,122B-30,32
Remote controlled mirror (LH)E-02B-192,193B-34,36
Remote controlled mirror (RH)E-13B-192,193B-34,36
Remote controlled mirror switchC-138B-192,193B-21,27
ResistorB-138B-89,97B-13,17
ResistorC-16B-174,180B-18,24
Roof antennaC-141B-196B-21,27
Roof wiring harness (RH) and J/B
combinationC-218B-54,55,118,119,122,123B-23,29
Room lampD-03B-118,122B-30,32
SSeat belt pretensioner (LH)D-28B-249,251B-31,33
Seat belt pretensioner (RH)D-26B-249,251B-31,33
Secondary air control solenoid valveB-142B-91,99B-13,17
Side turn signal lamp (LH)A-02B-134,138B-6,8
Side turn signal lamp (RH)A-01B-135,139B-6,8
Spare connector (for front fog lamp
relay)A-04XB-73,258B-6,8
Spare connector (for front fog lamp
switch)C-101B-258B-20,26
Spare connector (for front fog lamp)A-31B-258B-7,9
Spare connector (for radio)C-104B-196,197B-20,26
Spare connector speaker (LH)>E-04B-196B-34,36
Spare connector speaker (RH)>E-21B-196B-35,37
Spare connector (LH)>F-01B-197B-38,39
Spare connector (RH)>F-08B-197B-38,39
SRS-ECUC-21B-248,249,250,251B-18,24

INDEX - In order of parts nameC-20
Wiring diagram
page Circuit diagram page Connector
No. Parts name
SSRS-ECUC-41B-249,251B-19,25
StarterB-18B-79B-11,15
StarterB-19B-79B-11,15
Steering wheel sensorC-230B-202,210,218,226,236,246B-23,29
Stop lamp switchC-103B-144,145,198,206,212,220,228,238B-20,26
TThrottle position sensorB-02B-89,97,215,223,231,241B-10,14
Trunk lid latch switchF-10B-119,123B-38,39
VVehicle speed sensorB-03B-92,100,150,154,197B-10,14
WWaste gate solenoid valveB-36B-91,99B-11,15
Wheel speed sensor (Front:LH)A-03B-203,211,217,225,233,243B-6,8
Wheel speed sensor (Front:RH)A-37B-203,211,217,225,233,243B-7,9
Wheel speed sensor (Rear:LH)
D-10B-203,211,217,225,233,243B-30,32
Wheel speed sensor (Rear:RH)
D-04B-203,211,217,225,233,243B-30,32
Windshield washer motorF-21B-186,190B-38,39
Windshield wiper motorB-01B-186,190B-10,14

ELECTRICAL
WIRING
CONTENTS
HOW TO READ THE WIRING DIAGRAMS A.................................
ELECTRICAL WIRING B.....................................................
INDEXC ....................................................................

NOTES

00-1
GENERAL
CONTENTS
HOW TO USE THIS MANUAL 2..............
Scope of Maintenance, Repair and Servicing
Explanations 2.................................
Indication of Destination 2......................
Definition of Terms 2...........................
Indication of Tightening Torque 2................
Model Indications 3............................
Explanation of Manual Contents 4...............
HOW TO USE
TROUBLESHOOTING/INSPECTION SERVICE
POINTS 6....................................
Troubleshooting Contents 6.....................
Diagnosis Function 7...........................
How to Use the Inspection Procedures 10........
Connector Measurement Service Points 11.......
Connector Inspection 12........................
Inspection Service Points for a Blown Fuse 13...
Points to Note for Intermittent Malfunctions 13....
VEHICLE IDENTIFICATION 14.................
Vehicle Information Code Plate 14...............Models 14.....................................
Model Code 15................................
Chassis Number 16............................
Engine Model Number 16.......................
MAJOR SPECIFICATIONS 17.................
PRECAUTIONS BEFORE SERVICE 18.........
SUPPLEMENTAL RESTRAINT SYSTEM
(SRS) 21...................................
SRS SERVICE PRECAUTIONS 22.............
SUPPORT LOCATIONS FOR LIFTING AND
JACKING 24.................................
Support Positions for a Garage Jack and Axle
Stands 24.....................................
Support Positions for a Single-Post Lift or
Double-Post Lift 25.............................
Support Positions and Support Method for an
H-Bar Lift 26..................................
STANDARD PART/TIGHTENING-TORQUE
TABLE 28....................................

GENERAL -How to Use This Manual00-2
HOW TO USE THIS MANUAL
SCOPE OF MAINTENANCE, REPAIR
AND SERVICING EXPLANATIONS
This manual provides explanations, etc. concerning
procedures for the inspection, maintenance, repair
and servicing of the subject model. Note, however,
that for engine and transmission-related component
parts, this manual covers only on-vehicle
inspections, adjustments, and the removal and
installation procedures for major components.
For detailed information concerning the inspection,
checking, adjustment, disassembly and reassembly
of the engine, transmission and major components
after they have been removed from the vehicle,
please refer to separate manuals covering the
engine and the transmission.
ON-VEHICLE SERVICE
“On-vehicle Service” is procedures for performing
inspections and adjustments of particularly
important locations with regard to the construction
and for maintenance and servicing, but other
inspection (for looseness, play, cracking, damage,
etc.) must also be performed.
INSPECTION
Under this title are presented inspection and
checking procedures to be performed by using
special tools and measuring instruments and by
feeling, but, for actual maintenance and servicing
procedures, visual inspections should always be
performed as well.
INDICATION OF DESTINATION
General Export and GCC are used for convenience
to indicate destination.
NOTE
(1) “General Export” means territories other than
Europe, GCC, Australia, New Zealand, the
U.S.A. and Canada.
(2) “GCC” indicates countries that are members
of the (Persian) Gulf Cooperation Council of
nations.
(3) In some instances, vehicles with other
specifications may be shipped to some
countries.
DEFINITION OF TERMS
STANDARD VALUE
Indicates the value used as the standard for judging
the quality of a part or assembly on inspection
or the value to which the part or assembly is
corrected and adjusted. It is given by tolerance.
LIMIT
Shows the standard for judging the quality of a
part or assembly on inspection and means the
maximum or minimum value within which the part
or assembly must be kept functionally or in strength.
It is a value established outside the range of
standard value.
REFERENCE VALUE
Indicates the adjustment value prior to starting the
work (presented in order to facilitate assembly and
adjustment procedures, and so they can be
completed in a shorter time).
CAUTION
Indicates the presentation of information particularly
vital to the worker during the performance of
maintenance and servicing procedures in order to
avoid the possibility of injury to the worker, or
damage to component parts, or a reduction of
component or vehicle function or performance, etc.
INDICATION OF TIGHTENING TORQUE
Tightening torques (units: N·m) are set to take into
account the central value and the allowable
tolerance. The central value is the target value,
and the allowable tolerance provides the checking
range for tightening torques. If bolts and nuts are
not provided with tightening torques, refer to
P.00-28.