belt MITSUBISHI MIRAGE 2017 6.G Owners Manual

Interior 1-3 Overview
1
N00100302431
Interior
Bottle holders P.5-109
Power window lock switch P.5-29
Microphone P.5-82
Sun visors P.5-106 Vanity mirror P.5-106 Card holder P.5-106
Power door lock switch (if so equipped) P.5-25
Dome light P.5-107, 9-29
Inside rearview mirror P.5-32
Head restraints P. 4 - 7
Power window switch P.5-28
Seat belts P.4-8
Supplemental restraint system (SRS)- curtain airbags P.4-21, 4-32
USB input terminal (if so equipped)
Manual window control (if so equipped) P.5-28
Heated seat switches (if so equipped) P.4-4
Cargo room light P.5-108, 9-29
Front seats P.4-2
Supplemental restraint system (SRS)-side airbag (for front seat) P.4-21, 4-32
Rear shelf panel (if so equipped) P. 5 - 1 1 0
Jack P.8-5
Rear seats P.4-5
Assist grips P. 5 - 1 1 1
BK0235100US.book 3 ページ ２０１５年１１月２０日\b 5 Y

If this warning light comes on or
flashes while you’re driving...
Quick index 2-3
2
Anti-lock braking system warning
light
 When this light comes on,
the anti-lock braking system
is not functioning and only
the ordinary braking system is functioning. Park your vehicle in a safe
place and stop the engine.
Test the system as described on page 5-48.  If the light does not go out after
the test, or if it comes on
again, we recommend that
you have the system checked at an authorized
Mitsubishi Motors dealer or a repair
facility of your choice
as soon as possible.
P. 5-48
SRS warning light
 Immediately have the airbag and the pre-te
nsioner seat belt sy
stem checked at an
authorized Mitsubishi Motors dealer.
P. 4-27
Selector lever position indicator in the instrument cluste
r flashes slowly
(every 2 seconds)
 Have your continuously variable transmis
sion (CVT) checked at an authorized
Mitsubishi Motors dealer or
a repair facility of your
choice as soon as possible.
P. 5-42
and
ASC indicator and ASC OFF indicator
 Park your vehicle in a safe
place and stop the engine.
Restart the engine and check
whether the indicator goes out.
 If the indicator does not go out, or if it
comes on again, have
your vehicle inspected
by an authorized Mitsubishi Motors dealer or
a repair facility of your choice as soon
as possible.  When this indicator comes on, the activ
e stability control is not functioning.
P. 5-51
Wa rn in g l ig h t s
Do this
Ref. Page
BK0235100US.book 3 ページ ２０１５年１１月２０日\b 5 Y

California Perchlorate Materials Requirements
General information 3-7
3
N00300100017
Certain components of this vehicle, such as airbag modules, seat belt pretensioners, and button cell batteries, ma
y contain perchlorate
materials. Special handling may apply. For additional information, see www.d
tsc.ca.gov/hazardous-
waste/perchlorate.California Perchlorate Materials Requirements
BK0235100US.book 7 ページ ２０１５年１１月２０日\b 5 Y

4
Seat and restraint systemsSeats .................................................................................................4-2 Seats and restraint systems ..............................................................4-2 Front seats ........................................................................................4-3Rear seats .........................................................................................4-5 Head restraints .................................................................................4-7 Seat belts ..........................................................................................4-8Seat belt use during pregnancy ......................................................4-13 Seat belt pre-tensioner and force limiter systems ..........................4-13 Child restraint systems ...................................................................4-14Maintenance and inspection of seat belts ......................................4-21 Supplemental Restraint Syst
em (SRS) - airbag ......
.........
.........
.....4-21
BK0235100US.book 1 ページ ２０１５年１１月２０日\b 5 Y

Seats 4-2 Seat and restraint systems
4
N00408400509
 To adjust the seat forward or back- ward
Page 4-3
 To adjust the seatbacks
Page 4-4
 To adjust the seat height (Driver’s seat only, if so equipped)
Page 4-4
 Heated seats (if so equipped)
Page 4-4
 Folding the seatbacks forward
Page 4-6
N00401601235
Your vehicle has seat
belts and other safety
features that help
protect you and your pas-
sengers in an accident.Seat belts are the most important safety device. When worn properly, seat belts can reduce the chance of serious injury or deathin various types of cras
hes. For added protec-
tion during a severe fr
ontal collision, your
vehicle has a Supplemen
tal Restraint System
(SRS) with airbags for the driver and passen- gers. The seats, head restraints, and door
locks also are safety equipment, which must be used correctly. Always check the following before you drive: That everyone in your vehicle is properly wearing their seat belt.  That infants and small children are prop- erly secured in an appropriate childrestraint system in the rear seat.  That all doors are fully closed and locked.  That seatbacks are upright, with head restraints properly adjusted.
Seats 1 - Front seats 2 - Rear seats
Seats and restraint systems
BK0235100US.book 2 ページ ２０１５年１１月２０日\b 5 Y

Front seats
Seat and restraint systems 4-3
4
Safety equipment cannot prevent injury or death in all motor ve
hicle accidents. How-
ever, you can help reduce the risk of injury or death by following the
instructions in this
manual.
N00401800403
Position the driver’s seat
as far back as possi-
ble while maintaining a position that still enables you to fully apply the pedals, easily control the steering wh
eel and safely operate
the vehicle.
N00401900316
Pull the seat adjusting lever up and slide the seat forward or backwa
rd to the desired posi-
tion. Release the adjusting lever to lock theseat in place.
WA R N I N G Do not place objects under the seats. This could prevent the seat from locking securely, and it could
lead to an accident.
It may also cause damage to the seat orother parts.
Front seats
WA R N I N G Do not attempt to adjust the seat while driving. This can cause loss of vehicle con-trol and result
in an ac
cident.
After adjusting the seat, make sure that seat is securely locked into position. To reduce the risk to the driver of serious injury or death during deployment of thedriver’s airbag, always
properly wear the
seat belt and adjust th
e driver’s seat as far
back as possible while maintaining a posi-tion that still enables
you to fully apply the
pedals, easily control the steering wheel, and safely operate the vehicle. To reduce the risk to the front passenger of serious injury or
death during deploy-
ment of the passeng
er’s airbag, always
properly wear the seat
belt and adjust the
front passenger’s seat as far back as possi-ble. Always place childr
en 12 years old and
under in the rear seat
and use appropriate
child restraint systems.CAUTION Make sure that the seat is adjusted by an adult. If it is adjusted by a child, an unex- pected accident might occur. Do not place a cushion
or the like between
your back and the seatback while driving.The effectiveness of the head restraints will be reduced in the event of an accident.
 When sliding the seat
s, be careful not to
catch your hand or leg. When sliding or reclin
ing the seat rearward,
pay careful attention to
the rear seat passen-
gers.
To adjust the seat forward or backward
WA R N I N G To make sure that the seat is securely locked, try to move
it forward or back-
ward without using
the adjusting lever.
CAUTION
BK0235100US.book 3 ページ ２０１５年１１月２０日\b 5 Y

Front seats 4-4 Seat and restraint systems
4
N00402000369
To adjust the seatback, lean forward slightly, gently pull the seatback lock lever up, then lean backward to a comfortable position andrelease the lever. The seatback will lock in place.
N00402100243
To adjust the seat height, turn the dial asshown in the illustration.
N00435601418
The heated seats can
be operated by pushing
the switch when the ignition switch or the operation mode is in ON. The indicator light (A) will illuminate while the heater is on.
To adjust the seatbacks
CAUTION The reclining mechanism used in the seat- back is spring loaded, and will cause theseatback to return quickly to the vertical position when the lock lever is operated. When pulling the lever, sit close to the seat-back or hold the seatback with your hand to control its return motion.
WA R N I N G To reduce the risk of serious injury or death in the event of
an accident or sud-
den stop, all seatbacks should be kept inthe upright position while the vehicle is in motion. Seat belt performance during an accidentcan be adversely affect
ed if the seatbacks
are reclined. The more a seatback is reclined, the more likely seat belt perfor-mance will be advers
ely affected. If the
seat belt is not prop
erly positioned against
the body during an accident, there isincreased risk you will slide under the belt and receive serious
injury or death.
To adjust the seat height (Driver’s seat only, if so equipped)
1- To move the seat cushion up 2- To move the seat cushion downHeated seats
(if so equipped)
BK0235100US.book 4 ページ ２０１５年１１月２０日\b 5 Y

Rear seats
Seat and restraint systems 4-5
4
N00402500221
1 (HI) - Heater high (for quick heating) 2 - Heater off 3 (LO) - Heater low (to keep the seat
warm)
WA R N I N G Persons who are unable to feel tempera- ture change or skin
pain due to age, ill-
ness, injury, medication, alcohol use, fatigue or other phys
ical conditions or
who have sensitive sk
in may suffer burns
when using the heated seat even at low temperatures. To reduce the risk of burns,people with such conditions must use care when using the heated seat.
CAUTION Switch off the heated seats when not in use. Operate the heaters at the “HI” position forquick heating. After the seat has becomewarm, set the heater switch to the “LO” posi- tion to keep it warm. S
light variations in the
seat temperature may be
felt while using the
heated seats. This is caused by the operation of the heater’s internal thermostat and does not indicate a malfunction. Do not place heavy obj
ects on the seat or
stick pins, needles, or
other pointed objects
into the seat. Do not place a blanket,
cushion, or other
insulating material on
the seat while using
the heater; doing so can
cause the heater ele-
ment to overheat. When cleaning the seat, do not use benzine, kerosene, gasoline, alc
ohol, or other organic
solvents; doing so can cause damage not only to the surface of the seat, but also to the heater. If water or any other li
quid is spilled on the
seat, allow it to dry thoroughly beforeattempting to use the heater. Turn the heater off immediately if it
appears to be malfunc-
tioning during use.
Rear seats
WA R N I N G Never adjust the seats to make a cargo area when the vehicle is
in motion or on a
slope. The seats co
uld move more than
necessary or move suddenly causing a serious accident
and/or injury.
After folding down a
seat or returning a
seat back to its or
iginal position, make
sure the seat is firmly secured. Also check to make sure that the seat belts are in front of the seatbacks, and not caughtbehind the seatbacks. If the seat is not secured, it could move causing a serious accident and/or injury. Do not allow anyone to ride in the cargo area while the vehicle
is in motion. People
who are not properly seated and restrained can be seriously injured or killed in an accident. The cargo area in the
rear of the vehicle
should never be used as a play area bychildren. All children should be properly restrained in a restra
int device that offers
the maximum protection for their size andage. Refer to “Child restraint systems” on page 4-14.
BK0235100US.book 5 ページ ２０１５年１１月２０日\b 5 Y

Rear seats 4-6 Seat and restraint systems
4
N00402901222
The rear seatbacks can be folded forward to provide additional l
uggage compartment
space. 1. Place each head restraint in its lowest position. (Refer to
“Head restraints” on
page 4-7.) 2. Make sure that the seat belt for the out- board seating position is passed throughthe seat belt guide
strap (A) and the seat
belt guide is fastened as shown in the illustration.
3. Pull the left or right release straps (B), and fold the rear seatbacks forward.
1. Make sure that the seat belt for the out- board seating position is passed through the seat belt guide or
the seat belt latch
plate for the outboard
seating position is
stored. 2. Raise the seatback until it locks securelyinto place. After returning the seatback to its normal position, gently shake the seat and seat-back to make sure they are firmly secured.
CAUTION In the cargo area, do not load luggage or cargo higher than the top of the seats andmake sure that it is firmly secured. Restrictedrear vision or flying obj
ects entering the pas-
senger compartment during sudden braking could result in a se
rious accident and/or
injury. Seatbacks shoul
d always be folded and put
back into their normal position by an adult.  When adjusting the seats, be careful not to catch your hand. Pers
onal injury could
result.
Folding the seatbacks forward To f o l d
NOTE
 If the seat belt interfer
es with luggage, unfas-
ten the seat belt guide
to release the seat belt
and store the seat belt
latch plate as shown in
the illustration.
To r e t u r n
BK0235100US.book 6 ページ ２０１５年１１月２０日\b 5 Y

Head restraints
Seat and restraint systems 4-7
4
N00404300584
Padded head restraints for the seats can reduce the risk of a whiplash injury if your vehicle is hit from the rear. The head restraints are equipped in the illus-trated position. To maximize the effectiveness of your head restraint, adjust the front seatback to theupright position, the rear seatback to the nor- mal seating position, a
nd the head restraint to
the proper position. Sit back against the seat-back with your head close to the head restraint.
To reduce the risk of injury in an accident, adjust the head restraint height so that thecenter of the restraint is at your ear level when seated. Any person too tall for the restraint to reach their ear level when seatedshould raise the restrain
t to the highest locked
position.  To raise the restraint,
pull it straight up.
 To lower the restraint, push down on it while pressing the lock knob (A) in the direction shown by the arrow. After adjusting the height, push down on the restraint to make sure it is locked in position.
WA R N I N G After returning the seatbacks to their upright positions, make sure that the seat-backs are locked in place and firmly.Also check to be sure that the rear seat belts are in front of
the seatbacks, and not
caught behind the seatbacks.CAUTION Do not grab the seat be
lt guide to raise the
seatback; doing so can
cause damage of the
seat belt guide
and the seatback.
Head restraints
WA R N I N GDriving without the
head restraints in
place can cause you and your passengersserious injury or deat
h in an accident. To
reduce the risk of in
jury in an accident,
always make sure the head restraints areinstalled and proper
ly positioned when
the seat is occupied. In order to minimize
the risk of a neck
injury due to a rear impact, the front seat- back must be adjusted to the upright posi-tion, the rear seatback to the normal seating position, and
the head restraint to
the proper position
before vehicle opera-
tion. The driver shou
ld never adjust the
seat while the vehicle is in motion. Never place a cushion
or similar device on
the seatback. This can adversely affect head restraint performance by increasingthe distance betwee
n your head and the
restraint.
Adjustment of the head restraint height
BK0235100US.book 7 ページ ２０１５年１１月２０日\b 5 Y