Condition NISSAN TEANA 2008 Service Manual

AV-572
< ECU DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
BOSE AMP.
29
(V)30
(P)Sound signal center speak-
erOutputIgnition
switch
ONAudio output
31
(BR)32
(Y)Sound signal front speaker
RHOutputIgnition
switch
ONAudio output
33
(W/L)34
(GR/V)Surround sound signal rear
RHInputIgnition
switch
ONWhen DVD is playing.
*
35
(W/L)36
(W/R)Surround sound signal rear
LHInputIgnition
switch
ONWhen DVD is playing.*
52
(B)51
(W)Surround sound signal front
LHInputIgnition
switch
ONWhen DVD is playing.*
54
(Y)53
(BR)Surround sound signal front
RHInputIgnition
switch
ONWhen DVD is playing.*
Te r m i n a l
(Wire color)Description
ConditionReference value
(Approx.)
+ – Signal nameInput/
Output
SKIB3609E
SKIB3609E
SKIB3609E
SKIB3609E
SKIB3609E
SKIB3609E

AV
BOSE AMP.
AV-573
< ECU DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
MB A
O
P
*: All surround sounds are input only when the 5.1 channel surround sound is played.56
(W/L)55
(W/R)Voice guidance signal InputIgnition
switch
ONWhen inputting voice guid-
ance.
58
(W/R)57
(B/R)Surround sound signal cen-
terInputIgnition
switch
ONWhen DVD is playing.
*
59
(GR/V)60
(W/L)Surround sound signal cen-
terInputIgnition
switch
ONWhen DVD is playing.*
75
(P)—AV communication signal
(L)—— — —
76
(P)—AV communication signal
(L)—— — —
77
(L)—AV communication signal
(H)—— — —
78
(L)—AV communication signal
(H)—— — —
79 — Shield — — — —Te r m i n a l
(Wire color)Description
ConditionReference value
(Approx.)
+ – Signal nameInput/
Output
SKIB3609E
SKIB3609E
SKIB3609E

AV-594
< ECU DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
DVD PLAYER
DVD PLAYER
Reference ValuesINFOID:0000000003793609
TERMINAL LAYOUT
PHYSICAL VALUES
JPNIA1095ZZ
Terminal
(Wire color)Description
ConditionReference value
(Approx.)
+ – Signal nameInput/
Output
1
(B/W)Ground Ground —Ignition
switch
ON—0 V
2
(Y)Ground Battery power supply InputIgnition
switch
OFF— Battery voltage
3
(R/L)Ground Illumination signal InputIgnition
switch
OFFLighting switch is OFF. 0 V
Lighting switch is ON. 12.0 V
4
(V/W)Ground ACC power supply InputIgnition
switch
ACC— Battery voltage
5—Shield —— — —
6—Shield —— — —
7
(V)GroundComposite (DVD and AUX)
image signalOutputIgnition
switch
ONWhen DVD image or AUX
image is displayed.
8
(G)GroundComposite (AUX) image
signalOutputIgnition
switch
ONWhen AUX image is dis-
played.
9
(G)GroundComposite (DVD and AUX)
image signal ground—Ignition
switch
ON—0 V
10
(V)GroundComposite image (AUX)
signal ground—Ignition
switch
ON—0 V
SKIB2251J
SKIB2251J

AV
DVD PLAYER
AV-595
< ECU DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
MB A
O
P13
(B)11
(G)AUX sound signal LH InputIgnition
switch
ONAUX sound output.
14
(W)12
(R)AUX sound signal RH InputIgnition
switch
ONAUX sound output.
15 — AUX sound signal shield — — — —
21
(B)22
(G)Stereo (DVD and AUX
sound) sound signal LH OutputIgnition
switch
ONDVD
*1 or AUX sound out-
put.
23
(R)24
(W)Stereo (DVD and AUX
sound) sound signal RH OutputIgnition
switch
ONDVD
*1 or AUX sound out-
put.
25 — Stereo sound signal shield — — — —
29
(R)—AV communication signal
(L)Input/
Output—— —
30
(L)—AV communication signal
(H)Input/
Output—— —
31
(P)—AV communication signal
(L)Input/
Output—— —
32
(L)—AV communication signal
(H)Input/
Output—— —
34 — Shield — — — —
36
(W)35
(B)Surround sound signal front
RHOutputIgnition
switch
ONDVD sound output.
*2
Te r m i n a l
(Wire color)Description
ConditionReference value
(Approx.)
+ – Signal nameInput/
Output
SKIB3609E
SKIB3609E
SKIB3609E
SKIB3609E
SKIB3609E

AV-596
< ECU DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
DVD PLAYER
 *1: Stereo sounds are input only when the 2 channel stereo sound is played.
 *2: All surround sounds are input only when the 5.1 channel surround sound is played.38
(W)37
(B)Surround sound signal front
LHOutputIgnition
switch
ONDVD sound output.
*2
40
(W)39
(B)Surround sound signal cen-
terOutputIgnition
switch
ONDVD sound output.*2
42
(L)41
(R)Surround sound signal
wooferOutputIgnition
switch
ONDVD sound output.*2
43 — Shield — — — —
44 — Shield — — — —
46
(W)45
(B)Surround sound signal rear
RHOutputIgnition
switch
ONDVD sound output.
*2
48
(W)47
(B)Surround sound signal rear
LHOutputIgnition
switch
ONDVD sound output.*2
Terminal
(Wire color)Description
ConditionReference value
(Approx.)
+ – Signal nameInput/
Output
SKIB3609E
SKIB3609E
SKIB3609E
SKIB3609E
SKIB3609E

AV
CAMERA CONTROL UNIT
AV-617
< ECU DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
MB A
O
P
CAMERA CONTROL UNIT
Reference ValuesINFOID:0000000003793611
TERMINAL LAYOUT
PHYSICAL VALUES
JPNIA0007ZZ
Te r m i n a l
(Wire color)Description
ConditionReference value
(Approx.)
+ – Signal nameInput/
Output
5—Shield —— — —
6
(B)Ground Camera image signal InputIgnition
switch
ONWhen rear view camera im-
age is displayed.
7
(W)Ground Rear view camera ground —Ignition
switch
ON—0 V
8
(R)Ground Camera power supply OutputIgnition
switch
ON Selector lever in R position. 6.0 V
Other than selector lever in
R position.0 V
11 — S h i e l d — — — —
12
(BR)Ground Camera image signal OutputIgnition
switch
ONWhen rear view camera im-
age is displayed.
14
(GR)GroundCamera connection recog-
nition signalOutputIgnition
switch
ONConnected to camera con-
trol unit connector.0 V
Not connected to camera
control unit connector.5.0 V
17
(L/G)—AV communication signal
(L)Input/
Output—— —
18
(L/R)—AV communication signal
(H)Input/
Output—— —
19
(P)—AV communication signal
(L)Input/
Output—— —
SKIB2251J
SKIB2251J

AV-618
< ECU DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
CAMERA CONTROL UNIT
20
(L)—AV communication signal
(H)Input/
Output—— —
22
(W)Ground Reverse signal InputIgnition
switch
ONSelector lever in R position. 12.0 V
Other than selector lever in
R position.0 V
23
(G)Ground Sensor signal 1 InputIgnition
switch
ONTurn the steering to the
right.
A: Sensor signal 1
B: Sensor signal 2
Turn the steering to the left.
A: Sensor signal 1
B: Sensor signal 2
24
(SB)Ground Sensor signal 2 InputIgnition
switch
ONTurn the steering to the
right.
A: Sensor signal 1
B: Sensor signal 2
Turn the steering to the left.
A: Sensor signal 1
B: Sensor signal 2
25
(O)Ground Sensor signal 3 InputIgnition
switch
ONTurn the steering around
the neutral position.
A: Sensor signal 3
B: Sensor signal 1 Terminal
(Wire color)Description
ConditionReference value
(Approx.)
+ – Signal nameInput/
Output
SKIB3827E
SKIB3828E
SKIB3827E
SKIB3828E
SKIB3829E

AV
CAMERA CONTROL UNIT
AV-619
< ECU DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
MB A
O
P
26
(O)GroundVehicle speed signal
(8-pulse)InputIgnition
switch
ONWhen vehicle speed is ap-
prox. 40 km/h (25 MPH).NOTE:
The maximum voltage varies de-
pending on the specification
(destination unit).
30
(V)Ground ACC power supply InputIgnition
switch
ACC— Battery voltage
31
(B/R)Ground Ground —Ignition
switch
ON—0 V
32
(Y)Ground Battery power supply InputIgnition
switch
OFF— Battery voltage Te r m i n a l
(Wire color)Description
ConditionReference value
(Approx.)
+ – Signal nameInput/
Output
JSNIA0012GB

AV
NORMAL OPERATING CONDITION
AV-645
< SYMPTOM DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
C
D
E
F
G
H
I
J
K
L
MB A
O
P
NORMAL OPERATING CONDITION
DescriptionINFOID:0000000003765977
NOTE:
For Navigation system operation information, refer to Navigation system Owner's Manual.
BASIC OPERATIONS
RELATED TO AUDIO
 The majority of the audio malfunctions are the result of outside causes (bad CD/cassette, electromagnetic
interference, etc.). Check the symptoms below to diagnose the malfunction.
 The vehicle itself can be a source of noise if noise prevention parts or electrical equipment is malfunctioning.
Check if noise is caused and/or changed by engine speed, ignition switch turned to each position, and oper-
ation of each piece of electrical equipment, and then determine the cause.
NOTE:
 CD-R is not guaranteed to play because they can contain compressed audio (MP3, WMA) or could be incor-
rectly mastered by the customer on a computer.
 Check if the CDs carry the Compact Disc Logo. If not, the disc is not mastered to the red book Compact Disc
Standard and may not play.
Symptom Possible cause Possible solution
No image is displayed.The brightness is at the lowest setting. Adjust the brightness of the display.
The system in the video mode. Push to change the mode.
The display is turned off.
Push <> to turn on the display.
The screen is too dim. The move-
ment is slow.The temperature in the interior of the vehicle is low. Wait until the interior of the vehicle has
warmed up.
Some pixels in the display are dark-
er or brighter than others.This condition is an inherent characteristic of liquid
crystal displays.This is not a malfunction.
Some menu items cannot be se-
lected.Some menu items become unavailable while the ve-
hicle is driven.Park the vehicle in a safe location, and
then operate the multi AV system.
Symptom Cause and Counter measure
Cannot play.Check if the CD was inserted correctly.
Check if the CD is scratched or dirty.
Check if there is condensation inside the player, and if there is, wait until the condensation is gone
(about 1 hour) before using the player.
If there is a temperature increase error, the player will play correctly after it returns to the normal
temperature.
If there is a mixture of music CD files (CD-DA data) and MP3/WMA files on a CD, only the music
CD files (CD-DA data) will be played.
Files with extensions other than “.MP3”, “.WMA”, “.mp3”, or “.wma” cannot be played. In addition,
the character codes and number of characters for folder names and file names should be in com-
pliance with the specifications.
Check if the disc or the file is generated in an irregular format, This may occur depending on the
variation or the setting of MP3/WMA writing applications or other text editing applications.
Check if the finalization process, such as session close and disc close, is done for the disc.
Check if the CD is protected by copyright.
Poor sound quality. Check if the CD is scratched or dirty.
It takes a relatively long time before
the music starts playing.If there are many folder or file levels on the MP3/WMA disc, some time may be required before
the music starts playing.
Music cuts off or skips.The writing software and hardware combination might not match, or the writing speed, writing
depth, writing width might not match the specifications. Try using the slowest writing speed.
Skipping with high bit rate files. Skipping may occur with large quantities if data such as for high bit rate data.

AV-646
< SYMPTOM DIAGNOSIS >[BOSE AUDIO WITH NAVIGATION]
NORMAL OPERATING CONDITION
Noise resulting from variations in field strength, such as fading noise and multi-path noise, or external noise from trains and other
sources, is not a malfunction.
NOTE:
 Fading noise: This noise occurs because of variations in the field strength in a narrow range due to mountains or buildings blocking
the signal.
 Multi-path noise: This noise results from a time difference between the broadcast waves directly from the station arriving at the
antenna and the waves reflected by mountains or buildings.
RELATED TO NAVIGATION
As a result of a slight operating error, a normal symptom might be taken as a malfunction. Therefore, at first,
please check for yourself as per the following table.
Move immediately to the next song
when playing.When a non-MP3/WMA file has been given an extension of “.MP3”, “.WMA”, “.mp3”, or “.wma”,
or when play is prohibited by copyright protection, the player will skip to the next song.
The songs do not play back in the
desired order.The playback order is the order in which the files were written by the software, so the files might
not play in the desired order. Symptom Cause and Counter measure
Symptom Possible cause Possible solution
The map does not scroll even when
the vehicle is moving.The display is not set to the current location map. Set the display to the current location map.
The vehicle icon is not displayed. The display is not set to the current location map. Set the display to the current location map.
The GPS icon is not displayed. GPS signal cannot be received.Move the vehicle to an open area without
obstacle. If an object is placed on the up-
per area of GPS antenna, remove it.
No voice guidance is available.The route guidance was cancelled.If the route destination guidance has been
cancelled, reactivate the route guidance.
The volume is set very low. Adjust the volume of your voice guidance.
Some pixels in the display are dark-
er or brighter than others.This is an inherent characteristic of liquid crystal dis-
plays. Although the liquid crystal display is manufac-
tured with a technology of very high accuracy and it
has more than 99.99% effective pixels, a chip or a
permanent lighting of pixels might occur at 0.01% or
less.Please continue using the NAVI system,
as it is not a malfunction.
A mottle remains for a while after
turning the ignition switch ON.When it is cold, due to the characteristics of the liq-
uid crystal display backlight, a brightness mottle
might occur.It will disappear a few minutes later when
the backlight is warmed-up.
The screen is not clear.The adjustment of the contrast or the brightness is
inadequate.Adjust the contrast and the brightness of
the display.
The vehicle icon is not displayed in
the correct location. (The location
of the vehicle icon is misaligned
from the actual position.) The vehicle icon might be misaligned from the actual
position due to the satellite condition, the vehicle
condition (driving location or driving condition), etc.
Also, when the vehicle is traveling on a road whose
information is not stored in the map data, a new road
for example, the vehicle icon might be misaligned
from the actual position.Drive the vehicle for a while. The current
location is automatically corrected using
the map-matching and GPS information.
(It may take a few minutes.) If the GPS in-
formation is not used and the current loca-
tion is not corrected automatically, park the
vehicle in a safe location, and then correct
the current vehicle location.