remote control NISSAN TIIDA 2007 Service User Guide

DLK-14
REAR LH ..................................................................681
REAR LH : Description ..........................................681
REAR LH : Component Function Check ..............681
REAR LH : Diagnosis Procedure ...........................681
REAR RH .................................................................682
REAR RH : Description .........................................682
REAR RH : Component Function Check .............682
REAR RH : Diagnosis Procedure ..........................683
TRUNK LID OPENER ACTUATOR .................685
Description .............................................................685
Component Function Check ................................685
Diagnosis Procedure .............................................685
Component Inspection ...........................................686
BUZZER (COMBINATION METER) ................688
Description .............................................................688
Component Function Check ................................688
Diagnosis Procedure .............................................688
HAZARD WARNING LAMPS ..........................689
Description .............................................................689
Component Function Check ................................689
Diagnosis Procedure .............................................689
VEHICLE SPEED SIGNAL CIRCUIT ..............690
Description .............................................................690
Component Function Check ................................690
Diagnosis Procedure .............................................690
KEYFOB BATTERY AND FUNCTION ............691
Description .............................................................691
Component Function Check ................................691
Diagnosis Procedure .............................................691
Component Inspection ...........................................691
Special Repair Requirement ..................................691
ECU DIAGNOSIS .......................................692
BCM (BODY CONTROL MODULE) ................692
Reference Value ....................................................692
Wiring Diagram - POWER DOOR LOCK SYSTEM
- .............................................................................
693
Wiring Diagram - REMOTE KEYLESS ENTRY
SYSTEM - ..............................................................
703
Wiring Diagram - BACK DOOR OPENER SYS-
TEM - .....................................................................
709
Wiring Diagram - TRUNK LID OPENER SYSTEM
- .............................................................................
713
Fail Safe ................................................................715
DTC Inspection Priority Chart .............................716
DTC Index .............................................................716
SYMPTOM DIAGNOSIS ............................718
DOOR LOCK FUNCTION SYMPTOMS ..........718
DOOR LOCK AND UNLOCK SWITCH ...................718
DOOR LOCK AND UNLOCK SWITCH : Symptom
Table ......................................................................
718
KEYFOB ..................................................................718
KEYFOB : Symptom Table ...................................719
BACK DOOR OPEN FUNCTION SYMPTOMS
..
720
BACK DOOR OPENER SWITCH ...........................720
BACK DOOR OPENER SWITCH : Symptom Ta-
ble .........................................................................
720
TRUNK OPEN FUNCTION SYMPTOMS .........721
TRUNK LID OPENER SWITCH ..............................721
TRUNK LID OPENER SWITCH : Symptom Table .721
WARNING FUNCTION SYMPTOMS ...............722
BACK DOOR ...........................................................722
BACK DOOR : Symptom Table ............................722
HAZARD REMINDER FUNCTION ...................723
HAZARD WARNING LAMP ....................................723
HAZARD WARNING LAMP : Symptom Table ......723
SQUEAK AND RATTLE TROUBLE DIAG-
NOSES ..............................................................
724
Work Flow .............................................................724
Inspection Procedure ............................................726
Diagnostic Worksheet ...........................................728
PRECAUTION ...........................................730
PRECAUTIONS ................................................730
Precaution for Supplemental Restraint System
(SRS) "AIR BAG" and "SEAT BELT PRE-TEN-
SIONER" ...............................................................
730
Procedure without Cowl Top Cover ...................730
Steering Wheel Rotation after Battery Disconn
ect .........................................................................
730
Work ......................................................................731
PREPARATION .........................................732
PREPARATION ................................................732
Commercial Service Tool ......................................732
ON-VEHICLE MAINTENANCE .................733
PRE-INSPECTION FOR DIAGNOSTIC ...........733
Basic Inspection ....................................................733
REMOVAL AND INSTALLATION .............734
HOOD ...............................................................734
Fitting Adjustment .................................................734
Removal and Installation .......................................735
Removal and Installation of Hood Lock Control ....736
Hood Lock Control Inspection ...............................738
RADIATOR CORE SUPPORT .........................740
Removal and Installation .......................................740

DOOR LOCK FUNCTION
DLK-23
< FUNCTION DIAGNOSIS >[WITH I-KEY, WITHOUT SUPER LOCK]
C
D
E
F
G
H
I
J
L
MA
B
DLK
N
O
P
DOOR LOCK AND UNLOCK SWITCH : Component DescriptionINFOID:0000000001396465
INTELLIGENT KEY
INTELLIGENT KEY : System DiagramINFOID:0000000001396466
INTELLIGENT KEY OPERATION
INTELLIGENT KEY : System DescriptionINFOID:0000000001396467
INTELLIGENT KEY OPERATION
The Intelligent Key has the same functions as the remote keyless entry system. In addition to other safety fea-
tures, it can be used to lock and unlock all doors including the back door (hatchback) or the trunk (sedan).
This function can be set to OFF with CONSULT-III. For the setting information, refer to DLK-53, "
CONSULT-III
Function (INTELLIGENT KEY)".
OPERATION CONDITION
OPERATION AREA
To ensure that the Intelligent Key works effectively, use within a 100 cm range of each door, however the oper-
able range may differ according to surroundings.
DOOR LOCK AND UNLOCK CONTROL
When door lock and unlock button of the Intelligent Key are pressed, lock signal or unlock signal is transmitted
from Intelligent Key to Intelligent Key unit.
When Intelligent Key unit receives the door lock and unlock signal, it operates door lock actuator.
Item Function
BCM Controls the door lock function.
Door switch Detects door state (open or close).
Door lock and unlock switchTransmits door lock/unlock signal to BCM. Door lock/unlock switch indicator is built-in door
lock and unlock switch.
Door lock actuator Receives door lock/unlock signal from BCM and locks/unlocks each door.
ALKIA0711GB
Remote controller operation Operation condition
Lock All doors are closed
 Key switch is OFF (key is removed from ignition key cylinder)
 Ignition knob switch is OFF (Ignition switch is not pressed)
Unlock Key switch is OFF (key is removed from ignition key cylinder)
 Ignition knob switch is OFF (Ignition switch is not pressed)

DLK-150
< COMPONENT DIAGNOSIS >[WITH I-KEY, WITHOUT SUPER LOCK]
INTELLIGENT KEY BATTERY AND FUNCTION
INTELLIGENT KEY BATTERY AND FUNCTION
DescriptionINFOID:0000000001516665
The following functions are available when having and carrying the Intelligent Key.
 Door lock/unlock
 Back door open (hatchback)
 Trunk lid release (sedan)
 Engine start
Remote control entry function is available when operating the remote buttons.
Component Function CheckINFOID:0000000001516666
1.CHECK FUNCTION
With CONSULT-III
Check remote keyless entry receiver "RKE OPE COUN1" in DATA MONITOR mode with CONSULT-III.
Is the inspection result normal?
YES >> Intelligent Key is OK.
NO >> Refer to DLK-150, "
Diagnosis Procedure".
Diagnosis ProcedureINFOID:0000000001516667
1.CHECK INTELLIGENT KEY FUNCTION
Do doors lock and unlock when using the Intelligent Key buttons?
YES or NO?
YES >> Intelligent Key is OK.
NO >> GO TO 2.
2.CHECK INTELLIGENT KEY BATTERY
Check by connecting a resistance (approximately 300Ω) so that the
current value becomes about 10 mA.
Is the measurement value within specification?
YES >> Intelligent Key battery is OK.
NO >> Replace Intelligent Key battery.
Component InspectionINFOID:0000000001516668
For battery removal and installation, refer to XX-XX, "*****".
Special Repair RequirementINFOID:0000000001516669
Refer to CONSULT-III Operation Manual.
Monitor item Condition
RKE OPE COUN1 Check that the numerical value is changing while operating the Intelligent Key.
Standard : Approx. 2.5 - 3.0V
OCC0607D

PRE-INSPECTION FOR DIAGNOSTIC
DLK-211
< ON-VEHICLE MAINTENANCE >[WITH I-KEY, WITHOUT SUPER LOCK]
C
D
E
F
G
H
I
J
L
MA
B
DLK
N
O
P
ON-VEHICLE MAINTENANCE
PRE-INSPECTION FOR DIAGNOSTIC
Basic InspectionINFOID:0000000001396666
BASIC INSPECTION
1.CHECK POWER DOOR LOCK AND UNLOCK SWITCH OPERATION
Check door lock and unlock operation by operating door lock and unlock switch.
Is the inspection result normal?
YES >> GO TO 2.
NO >> Refer to DLK-191, "
DOOR LOCK AND UNLOCK SWITCH : Symptom Table".
2.CHECK INTELLIGENT KEY OPERATION
Check door lock and unlock operation by operating the Intelligent Key remote control button.
Is the inspection result normal?
YES >> GO TO 3.
NO >> Refer to DLK-192, "
INTELLIGENT KEY : Symptom Table".
3.CHECK DOOR REQUEST SWITCH OPERATION
Check door lock and unlock operation by operating door request switch.
Is the inspection result normal?
YES >> GO TO 4.
NO >> Refer to DLK-193, "
DOOR REQUEST SWITCH : Symptom Table".
4.CHECK KEY REMINDER OPERATION
Check key reminder operation. Refer to DLK-31, "
KEY REMINDER : System Description".
Is the inspection result normal?
YES >> GO TO 5.
NO >> Refer to DLK-194, "
KEY REMINDER : Symptom Table".
5.CHECK AUTO DOOR LOCK OPERATION
Check auto door lock operation. Refer to XX-XX, "*****"
.
Is the inspection result normal?
YES >> GO TO 6.
NO >> Refer to DLK-194, "
AUTO RELOCK : Symptom Table".
6.CHECK VEHICLE SPEED SENSING AUTO DOOR LOCK OPERATION
Check vehicle speed sensing auto door lock operation. Refer to XX-XX, "*****"
.
Is the inspection result normal?
YES >> GO TO 7.
NO >> Refer to XX-XX, "*****"
.
7.CHECK BACK DOOR (HATCHBACK) / TRUNK LID (SEDAN) OPENER OPERATION
Check back door (hatchback)/trunk lid (sedan) opener operation by operating the opener switch.
Is the inspection result normal?
YES >> GO TO 8.
NO >> Refer to DLK-195, "
BACK DOOR OPENER SWITCH : Symptom Table".
8.CHECK WARNING FUNCTION
Check warning function. Refer to DLK-39, "
System Description".
Is the inspection result normal?
YES >> GO TO 9.
NO [Buzzer (combination meter)]>> Refer to DLK-197, "
BUZZER (COMBINATION METER) : Symptom
Table".

DOOR LOCK FUNCTION
DLK-247
< FUNCTION DIAGNOSIS >[WITH I-KEY & SUPER LOCK]
C
D
E
F
G
H
I
J
L
MA
B
DLK
N
O
P
DOOR LOCK AND UNLOCK SWITCH : Component DescriptionINFOID:0000000001396673
INTELLIGENT KEY
INTELLIGENT KEY : System DiagramINFOID:0000000001396674
INTELLIGENT KEY OPERATION
INTELLIGENT KEY : System DescriptionINFOID:0000000001396675
INTELLIGENT KEY OPERATION
The Intelligent Key has the same functions as the multi remote control system. In addition to other safety fea-
tures, it can be used to lock and unlock all doors including the back door (hatchback) or the trunk (sedan).
This function can be set to OFF with CONSULT-III. For the setting information, refer to DLK-278, "
CONSULT-
III Function (INTELLIGENT KEY)".
OPERATION CONDITION
OPERATION AREA
10. Main power window and door lock/unlock
switch D7, D811. Power window and door lock/unlock
switch (passenger side) D10512. Back door lock assembly (back door
switch) D405 (hatchback view with
back door open)
13. Back door opener switch (hatchback)
D40814. Trunk lid opener switch (sedan) B61
Item Function
BCM Controls the door lock function.
Door switch Detects door state (open or close).
Door lock and unlock switchTransmits door lock and unlock signal to BCM. Door lock/unlock switch indicator is built-in
door lock/unlock switch.
Door lock actuator Receives door lock/unlock signal from BCM and locks/unlock each door.
ALKIA0711GB
Remote controller operation Operation condition
Lock All doors are closed
 Key switch is OFF (key is removed from ignition key cylinder)
 Ignition knob switch is OFF (Ignition switch is not pressed)
 No Intelligent Keys are inside the vehicle.
Unlock Key switch is OFF (key is removed from ignition key cylinder)
 Ignition knob switch is OFF (Ignition switch is not pressed)

DLK-380
< COMPONENT DIAGNOSIS >[WITH I-KEY & SUPER LOCK]
INTELLIGENT KEY BATTERY AND FUNCTION
INTELLIGENT KEY BATTERY AND FUNCTION
DescriptionINFOID:0000000001530384
The following functions are available when having and carrying the Intelligent Key.
 Door lock/unlock
 Back door open (hatchback)
 Trunk lid release (sedan)
 Engine start
Remote control entry function is available when operating the remote buttons.
Component Function CheckINFOID:0000000001530385
1.CHECK FUNCTION
With CONSULT-III
Check remote keyless entry receiver "RKE OPE COUN1" in DATA MONITOR mode with CONSULT-III.
Is the inspection result normal?
YES >> Intelligent Key is OK.
NO >> Refer to DLK-380, "
Diagnosis Procedure".
Diagnosis ProcedureINFOID:0000000001530386
1.CHECK INTELLIGENT KEY FUNCTION
Do doors lock and unlock when using the Intelligent Key buttons?
YES or NO?
YES >> Intelligent Key is OK.
NO >> GO TO 2.
2.CHECK INTELLIGENT KEY BATTERY
Check by connecting a resistance (approximately 300Ω) so that the
current value becomes about 10 mA.
Is the measurement value within specification?
YES >> Intelligent Key battery is OK.
NO >> Replace Intelligent Key battery.
Component InspectionINFOID:0000000001530387
For battery removal and installation, refer to XX-XX, "*****".
Special Repair RequirementINFOID:0000000001530388
Refer to CONSULT-III Operation Manual.
Monitor item Condition
RKE OPE COUN1 Check that the numerical value is changing while operating the Intelligent Key.
Standard : Approx. 2.5 - 3.0V
OCC0607D

DLK-440
< ON-VEHICLE MAINTENANCE >[WITH I-KEY & SUPER LOCK]
PRE-INSPECTION FOR DIAGNOSTIC
ON-VEHICLE MAINTENANCE
PRE-INSPECTION FOR DIAGNOSTIC
Basic InspectionINFOID:0000000001396899
BASIC INSPECTION
1.CHECK POWER DOOR LOCK AND UNLOCK SWITCH OPERATION
Check door lock and unlock operation by operating door lock and unlock switch.
Is the inspection result normal?
YES >> GO TO 2.
NO >> Refer to XX-XX, "*****"
.
2.CHECK INTELLIGENT KEY OPERATION
Check door lock and unlock operation by operating the Intelligent Key remote control button.
Is the inspection result normal?
YES >> GO TO 3.
NO >> Refer to XX-XX, "*****"
.
3.CHECK DOOR REQUEST SWITCH OPERATION
Check door lock and unlock operation by operating door request switch.
Is the inspection result normal?
YES >> GO TO 4.
NO >> Refer to XX-XX, "*****"
.
4.CHECK KEY REMINDER OPERATION
Check key reminder operation. Refer to DLK-255, "
KEY REMINDER : System Description".
Is the inspection result normal?
YES >> GO TO 5.
NO >> Refer to XX-XX, "*****"
.
5.CHECK AUTO DOOR LOCK OPERATION
Check auto door lock operation. Refer to XX-XX, "*****"
.
Is the inspection result normal?
YES >> GO TO 6.
NO >> Refer to XX-XX, "*****"
.
6.CHECK VEHICLE SPEED SENSING AUTO DOOR LOCK OPERATION
Check vehicle speed sensing auto door lock operation. Refer to XX-XX, "*****"
.
Is the inspection result normal?
YES >> GO TO 7.
NO >> Refer to XX-XX, "*****"
.
7.CHECK BACK DOOR OPENER OPERATION
Check back door opener operation by operating the back door opener switch.
Is the inspection result normal?
YES >> GO TO 8.
NO >> Refer to XX-XX, "*****"
.
8.CHECK WARNING FUNCTION
Check warning function. Refer to DLK-264, "
System Description".
Is the inspection result normal?
YES >> GO TO 9.
NO [Buzzer (combination meter)]>> Refer to XX-XX, "*****"
.
NO (Intelligent Key warning buzzer)>> Refer to XX-XX, "*****"
.

DOOR LOCK FUNCTION
DLK-475
< FUNCTION DIAGNOSIS >[WITHOUT I-KEY & SUPER LOCK]
C
D
E
F
G
H
I
J
L
MA
B
DLK
N
O
P
DOOR LOCK AND UNLOCK SWITCH : Component DescriptionINFOID:0000000001396991
REMOTE KEYLESS ENTRY
REMOTE KEYLESS ENTRY : System DiagramINFOID:0000000001396992
KEYFOB OPERATION
REMOTE KEYLESS ENTRY : System DescriptionINFOID:0000000001396993
KEYFOB OPERATION
The multi remote control system can be locked and unlocked by pressing door lock and unlock button of key-
fob.
DOOR LOCK AND UNLOCK OPERATION
When door lock and unlock button of keyfob is pressed, door lock
and unlock signal transmits from keyfob to BCM. When BCM
receives the door lock and unlock signal, it operates door lock actua-
tor.
1. Integrated door lock keyfob.
2. Integrated ignition key/emergency key.
3. Key number plate.
OPERATION CONDITION
OPERATION AREA
To ensure that the keyfob works effectively, use within 100 cm range of each door, however the operable
range may differ according to surroundings.
Item Function
BCM Controls the door lock and unlock function.
Door switch Detects door state (open or closed).
Door lock and unlock switchTransmits door lock and unlock signal to BCM. Door lock and unlock switch indicator is built
in door lock and unlock switch.
Door lock actuator Receives door lock and unlock signal from BCM and locks and unlocks each door.
ALKIA0836GB
ALKIA0821ZZ
Remote controller operation Operation condition
Lock/unlock Key switch is OFF (key is removed from ignition key cylinder).

DOOR LOCK FUNCTION
DLK-477
< FUNCTION DIAGNOSIS >[WITHOUT I-KEY & SUPER LOCK]
C
D
E
F
G
H
I
J
L
MA
B
DLK
N
O
P
REMOTE KEYLESS ENTRY : Component DescriptionINFOID:0000000001396995
Item Function
BCM Controls the door lock function.
Key switch Detects that ignition key is inserted into ignition key cylinder.
Door lock actuator Receives lock and unlock signal from BCM and locks and unlocks each door.

DLK-490
< FUNCTION DIAGNOSIS >[WITHOUT I-KEY & SUPER LOCK]
DIAGNOSIS SYSTEM (BCM)
MULTIREMOTE ENT : CONSULT-III Function (BCM - MULTIREMOTE ENT)
INFOID:0000000001397022
BCM CONSULT-III FUNCTION
CONSULT-III performs the following functions via CAN communication with BCM.
DATA MONITOR
ACTIVE TEST
WORK SUPPORT
Diagnosis mode Function Description
WORK SUPPORT Changes the setting for each system function.
DATA MONITOR The BCM input/output signals are displayed.
ACTIVE TEST The signals used to activate each device are forcibly supplied from BCM.
Monitor Item Condition
IGN ON SW Indicates [ON/OFF] condition of ignition switch in ON position.
ACC ON SW Indicates [ON/OFF] condition of ignition switch in ACC position.
KEY ON SW Indicates [ON/OFF] condition of key switch.
KEYKESS LOCK Indicates [ON/OFF] condition of lock signal from key fob.
KEYLESS UNLOCK Indicates [ON/OFF] condition of unlock signal from key fob.
DOOR SW-DR Indicates [ON/OFF] condition of front door switch (driver side).
DOOR SW-AS Indicates [ON/OFF] condition of front door switch (passenger side).
DOOR SW-RR Indicates [ON/OFF] condition of rear door switch RH.
DOOR SW-RL Indicates [ON/OFF] condition of rear door switch LH.
BACK DOOR SW Indicates [ON/OFF] condition of back door switch.
CDL LOCK SW Indicates [ON/OFF] condition of door lock and unlock switch.
CDL UNLOCK SW Indicates [ON/OFF] condition of door lock and unlock switch.
RKE LOCK AND UNLOCK This item is indicated, but not monitored.
KEYFOB 1 Indicates [ON/OFF] condition of remote controller ID code registration.
KEYFOB 2 Indicates [ON/OFF] condition of remote controller ID code registration.
KEYFOB 3 Indicates [ON/OFF] condition of remote controller ID code registration.
KEYFOB 4 Indicates [ON/OFF] condition of remote controller ID code registration.
KEYFOB 5 Indicates [ON/OFF] condition of remote controller ID code registration.
Test item Description
DOOR LOCKThis test is able to check warning chime in combination meter operation. [ALL LOCK/ALL UN-
LOCK/DR UNLOCK/OTHER UNLOCK]
INT LAMP This test is able to check interior lamp operation [ON/OFF].
FLASHER This test is able to check flasher operation [LH/RH/OFF].
Test item Description
HAZARD LAMP SETAnswer back function (hazard) mode can be changed in this mode.
For the detail of the setting, refer to DLK-485, "
System Description".
AUTO LOCK SETAuto relock time can be changed in this mode.
 MODE 1: 1 minute
 MODE 2: 2 minutes
 MODE 3: 3 minutes
 MODE 4: 4 minutes
 MODE 5: 5 minutes