switch NISSAN TIIDA 2007 Service Repair Manual

BUZZER (COMBINATION METER)
DLK-145
< COMPONENT DIAGNOSIS >[WITH I-KEY, WITHOUT SUPER LOCK]
C
D
E
F
G
H
I
J
L
MA
B
DLK
N
O
P
BUZZER (COMBINATION METER)
DescriptionINFOID:0000000001396618
Performs operation method guide and warning with buzzer.
Component Function CheckINFOID:0000000001396619
1.CHECK FUNCTION
With CONSULT-III
Check the operation with “INSIDE BUZZER” in “Active Test”.
Is the inspection result normal?
Yes >> Warning buzzer in combination meter is OK.
No >> Refer to DLK-145, "
Diagnosis Procedure".
Diagnosis ProcedureINFOID:0000000001396620
1.CHECK BUZZER (COMBINATION METER) CIRCUIT
Refer to XX-XX, "*****"
.
Is the inspection result normal?
Yes >> GO TO 2.
No >> Repair or replace buzzer (combination meter) circuit.
2.CHECK INTERMITTENT INCIDENT
Refer to @@@.
>> INSPECTION END
Test item Condition
INSIDE BUZZER:TAKE OUT Take away warning chime sounds
:KNOB Ignition knob switch warning chime sounds
:KEY Key warning chime sounds

LOCK WARNING LAMP
DLK-147
< COMPONENT DIAGNOSIS >[WITH I-KEY, WITHOUT SUPER LOCK]
C
D
E
F
G
H
I
J
L
MA
B
DLK
N
O
P
LOCK WARNING LAMP
DescriptionINFOID:0000000001396624
Performs operation method guide and warning together with buzzer.
Component Function CheckINFOID:0000000001396625
1.CHECK FUNCTION
With CONSULT-III
Check the operation with “INDICATOR” in “Active Test” mode.
Is the inspection result normal?
Yes >> Lock warning lamp in combination meter is OK.
No >> Refer to DLK-147, "
Diagnosis Procedure".
Diagnosis ProcedureINFOID:0000000001396626
1.CHECK COMBINATION METER OPERATION
Check the operation of the combination meter.
Does the combination meter operate normally?
Yes >> GO TO 2.
No >> Refer to MWI-3, "
Work Flow".
2.CHECK LOCK WARNING LAMP CIRCUIT
1. Engage the parking brake.
2. Turn ignition switch ON.
3. Depress the brake pedal and take the shift lever out of park.
4. With the shift lever out of park, attempt to turn ignition switch to the LOCK position.
Does the "LOCK" indicator illuminate?
Yes >> GO TO 3.
No >> Refer to MWI-3, "
Work Flow" in combination meter to diagnose the park/neutral position indicator
circuit.
3.CHECK INTERMITTENT INCIDENT
Refer to @@@.
>> INSPECTION END
Test item Condition
INDICATOR:KNOB ON Lock warning lamp illuminates
:KNOB IND Lock warning lamp flashes

DLK-148
< COMPONENT DIAGNOSIS >[WITH I-KEY, WITHOUT SUPER LOCK]
HAZARD WARNING LAMPS
HAZARD WARNING LAMPS
DescriptionINFOID:0000000001396627
Performs answer-back for each operation with the number of blinks.
Component Function CheckINFOID:0000000001396628
1.CHECK FUNCTION
With CONSULT-III
Check hazard warning lamp “FLASHER” in “Active Test” mode.
Is the inspection result normal?
YES >> Hazard warning lamp circuit is OK.
NO >> Refer to DLK-148, "
Diagnosis Procedure".
Diagnosis ProcedureINFOID:0000000001396629
1.CHECK HAZARD SWITCH CIRCUIT
Use the hazard warning switch circuit.
Do the hazard warning lamps operate normally?
YES >> GO TO 2.
NO >> Repair hazard warning lamps. Refer to BCS-9, "
System Diagram".
2.CHECK INTERMITTENT INCIDENT
Refer to @@@.
>> INSPECTION END

INTELLIGENT KEY UNIT
DLK-151
< ECU DIAGNOSIS >[WITH I-KEY, WITHOUT SUPER LOCK]
C
D
E
F
G
H
I
J
L
MA
B
DLK
N
O
P
ECU DIAGNOSIS
INTELLIGENT KEY UNIT
Reference ValueINFOID:0000000001396636
VALUES ON THE DIAGNOSIS TOOL
CONSULT-III MONITOR ITEM
Monitor Item Condition Value/Status
PUSH SW Ignition knobRelease OFF
Press ON
KEY ON SW Mechanical keyRemoved OFF
Inserted ON
DR REQ SWDoor request switch
(driver)Release OFF
Press ON
AS REQ SWDoor request switch
(passenger)Release OFF
Press ON
BD/TR REQ SWDoor request switch
(back door)Release OFF
Press ON
IGN SW Ignition switchOther than ON position OFF
ON position ON
ACC SW Ignition switchOther than ACC or ON position OFF
ACC or ON position ON
STOP LAMP SW Brake pedalPress OFF
Release ON
DOOR LOCK SIGLock button of
Intelligent KeyRelease OFF
Press ON
DOOR UNLOCK SIGUnlock button of
Intelligent KeyRelease OFF
Press ON
DOOR SW DR Door (driver side)Close OFF
Open ON
DOOR SW AS Door (passenger side)Close OFF
Open ON
DOOR SW RR Door (rear RH)Close OFF
Open ON
DOOR SW RL Door (rear LH)Close OFF
Open ON
DOOR BK SW Back doorClose OFF
Open ON
VEHICLE SPEED While driving Equivalent to speedometer reading

DLK-152
< ECU DIAGNOSIS >[WITH I-KEY, WITHOUT SUPER LOCK]
INTELLIGENT KEY UNIT
TERMINAL LAYOUT
PHYSICAL VALUES
JMKIA0415ZZ
Te r m i n a l N o .
Wire
colorDescription
ConditionVa l u e [ V ]
(Approx.)
Signal nameInput/
Output +–
1GroundRSteering lock unit power
supplyOutput — 5
2 Ground L CAN - HInput/
Output——
3 Ground P CAN - LInput/
Output——
4GroundOIntelligent Key warning
buzzerOutputIntelligent
Key warning
buzzerSounding 0
Not sounding Battery voltage
5GroundGFront door request
switch
(driver side)InputFront door
request
switch
(driver side)ON (Pressed) 0
OFF (Released) 5
6GroundYIgnition switch power
supplyInputIgnition
switchOFF or ACC 0
ON or START Battery voltage
7 Ground LG Key switch InputWhen ignition key is inserted into ig-
nition key cylinderBattery voltage
When ignition key is not inserted into
ignition key cylinder0
8GroundWImm- Input — —
9 Ground O Imm- Output — —
10 Ground V Battery power supply Input Ignition switch OFF Battery voltage
11 Ground SB Battery power supply Input Ignition switch OFF Battery voltage
12 Ground B Ground — Ignition switch ON 0

DLK-154
< ECU DIAGNOSIS >[WITH I-KEY, WITHOUT SUPER LOCK]
INTELLIGENT KEY UNIT
16 Ground VInstrument panel anten-
na (-)OutputIgnition knob
is pressed.When Intelligent Key
is in the antenna de-
tection area
When Intelligent Key
is not in the antenna
detection area
17 Ground WOutside key antenna (+)
(rear bumper)OutputWhen the
back door re-
quest switch
is operated
with ignition
switch OFFWhen Intelligent Key
is in the antenna de-
tection area
When Intelligent Key
is not in the antenna
detection area
18 Ground BOutside key antenna (-)
(rear bumper)OutputWhen the
back door re-
quest switch
is operated
with ignition
switch OFFWhen Intelligent Key
is in the antenna de-
tection area
When Intelligent Key
is not in the antenna
detection area Te r m i n a l N o .
Wire
colorDescription
ConditionVa l u e [ V ]
(Approx.)
Signal nameInput/
Output +–
JMKIA0392ZZ
JMKIA0390ZZ
JMKIA0397ZZ
JMKIA0514ZZ
JMKIA0395ZZ
JMKIA0515ZZ

INTELLIGENT KEY UNIT
DLK-155
< ECU DIAGNOSIS >[WITH I-KEY, WITHOUT SUPER LOCK]
C
D
E
F
G
H
I
J
L
MA
B
DLK
N
O
P
19 Ground VOutside key antenna (+)
(driver side)OutputWhen the
front door re-
quest switch
(driver side)
is operated
with ignition
switch OFFWhen Intelligent Key
is in the antenna de-
tection area
When Intelligent Key
is not in the antenna
detection area
20 Ground POutside key antenna (-)
(driver side)OutputWhen the
front door re-
quest switch
(driver side)
is operated
with ignition
switch OFFWhen Intelligent Key
is in the antenna de-
tection area
When Intelligent Key
is not in the antenna
detection area
22
*1Ground BR Key lock solenoid OutputKey lock so-
lenoidLOCK
*2Battery voltage
UNLOCK
*20
25 Ground LFront door request
switch
(passenger side)InputFront door
request
switch
(passenger
side)ON (Pressed) 0
OFF (Released) 5
26 Ground SB Stop lamp switch InputDepress the brake pedal Battery voltage
Release the brake pedal 0
27 Ground W Ignition knob switch InputIgnition
switch OFFWhen ignition knob
switch is pressedBattery voltage
When ignition knob
switch is released0
28 Ground Y Door lock status switch InputLock (ON) 5
Unlock (OFF) 0
29
*2Ground V Back door request switch InputBack door re-
quest switchON (Pressed) 0
OFF (Released) 5 Te r m i n a l N o .
Wire
colorDescription
ConditionVa l u e [ V ]
(Approx.)
Signal nameInput/
Output +–
JMKIA0397ZZ
JMKIA0514ZZ
JMKIA0395ZZ
JMKIA0515ZZ

DLK-156
< ECU DIAGNOSIS >[WITH I-KEY, WITHOUT SUPER LOCK]
INTELLIGENT KEY UNIT
29*3Ground VTrunk opener request
switchInputTrunk opener
request
switchON (Pressed) 0
OFF (Released) 5
30 Ground GR Security indicator lamp OutputIgnition
switch OFFWhen security indi-
cator lamp is ON0
When security indi-
cator lamp is OFFBattery voltage
31 Ground BR Steering lock unit ground — — — 0
32 Ground GRSteering lock unit com-
municationInput/
OutputSteering lockLOCK status 5
LOCK or UNLOCK
35 Ground LFront console antenna
(+)OutputIgnition knob
is pressed.When Intelligent Key
is in the antenna de-
tection area
When Intelligent Key
is not in the antenna
detection area
36 Ground P Front console antenna (-) OutputIgnition knob
is pressed.When Intelligent Key
is in the antenna de-
tection area
When Intelligent Key
is not in the antenna
detection area Te r m i n a l N o .
Wire
colorDescription
ConditionVa l u e [ V ]
(Approx.)
Signal nameInput/
Output +–
JMKIA0433ZZ
JMKIA0393ZZ
JMKIA0391ZZ
JMKIA0392ZZ
JMKIA0390ZZ

INTELLIGENT KEY UNIT
DLK-157
< ECU DIAGNOSIS >[WITH I-KEY, WITHOUT SUPER LOCK]
C
D
E
F
G
H
I
J
L
MA
B
DLK
N
O
P
*1:M/T models.
*2: Hatchback models.
*3: Sedan models.37 Ground BROutside key antenna (+)
(passenger side)OutputWhen the
front door re-
quest switch
(passenger
side) is oper-
ated with ig-
nition switch
OFFWhen Intelligent Key
is in the antenna de-
tection area
When Intelligent Key
is in the antenna de-
tection area
38 Ground YOutside key antenna (-)
(passenger side)OutputWhen the
front door re-
quest switch
(passenger
side) is oper-
ated with ig-
nition switch
OFFWhen Intelligent Key
is in the antenna de-
tection area
When Intelligent Key
is not in the antenna
detection area Te r m i n a l N o .
Wire
colorDescription
ConditionVa l u e [ V ]
(Approx.)
Signal nameInput/
Output +–
JMKIA0397ZZ
JMKIA0514ZZ
JMKIA0395ZZ
JMKIA0515ZZ

INTELLIGENT KEY UNIT
DLK-171
< ECU DIAGNOSIS >[WITH I-KEY, WITHOUT SUPER LOCK]
C
D
E
F
G
H
I
J
L
MA
B
DLK
N
O
P
Fail SafeINFOID:0000000001396640
DTC Inspection Priority ChartINFOID:0000000001396641
If some DTCs are displayed at the same time, perform inspections one by one based on the following priority
chart.
DTC IndexINFOID:0000000001396642
NOTE:
Details of time display
 CRNT: Displays when there is a malfunction now or after returning to the normal condition until turning igni-
tion switch OFF → ON again.
 1 - 39: Displayed if any previous malfunction is present when current condition is normal. It increases like 1
→ 2 → 3...38 → 39 after returning to the normal condition whenever ignition switch OFF → ON. The counter
remains at 39 even if the number of cycles exceeds it. It is counted from 1 again when turning ignition switch
OFF → ON after returning to the normal condition if the malfunction is detected again.
Display contents of CONSULT-III Fail-safe Cancellation
B2013: STRG COMM 1  Inhibits steering look unlocking Erase DTC
B2552: INTELLIGENT KEY Inhibits steering look unlocking
 Inhibits engine cranking
(BCM)
Fuel cut
(ECM)Erase DTC
B2590: NATS MALFUNCTION Inhibits steering look unlocking
 Inhibits engine cranking
(BCM)
Fuel cut
(ECM)Erase DTC
Priority DTC
1 U1000: CAN COMM CIRCUIT
 U1010: CONTROL UNIT (CAN)
 B2552: INTELIGENT KEY
2 B2013: STRG COMM 1
 B2590: NATS MALFUNCTION
CONSULT display Detection condition Fail-safe Diagnosis
No DTC is detected.
further testing
may be required.———
U1000: CAN COMM CIRCUITIntelligent Key unit cannot receive CAN communi-
cation signal continuously for 2 seconds or more.—Check CAN communi-
cation system.
Refer to DLK-56
U1010: CONTROL UNIT (CAN)Intelligent Key unit detects internal CAN communi-
cation circuit malfunction.—Replace Intelligent Key
unit.
B2013: STRG COMM 1The ID verification result between Intelligent key
unit and steering lock unit are NG. Or Intelligent Key
unit cannot communicate with steering lock unit.×Perform steering lock
unit ID registration with
CONSULT-III
B2552: INTELLIGENT KEY Intelligent Key unit internal malfunction.×Replace Intelligent Key
unit.
B2590: NATS MALFUNCTIONThe ID verification result between Intelligent key
unit and BCM are NG. Or Intelligent Key unit cannot
communicate with BCM.×Check NATS
Refer to XX-XX, "*****"