Def NISSAN TIIDA 2007 Service Manual PDF

REAR WINDOW DEFOGGER SYSTEM
DEF-7
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
MA
B
DEF
N
O
P
Component Parts LocationINFOID:0000000001697543
Component DescriptionINFOID:0000000001697544
ALLIA0619ZZ
1. BCM M18, M20 (view with glove box
removed)2. Rear window defogger switch (part
of front air control)3. A. Rear window defogger ground
connector D413 (Hatchback)
B. Rear window defogger connector
D412 (Hatchback)
C. Condenser-1 D409, D411 (Hatch-
back)
4. A. Rear window defogger connector
B140 (Sedan)
B. Rear window defogger ground
connector B141 (Sedan)
C. Condenser-1 B130, B131 (Se-
dan)5. IPDM E/R E46, E48 6. Door mirror LH D4, RH D107 (with
heated mirrors)
7. Heated mirror relay M48 (with heat-
ed mirrors)
BCM Operates the rear window defogger with the operation of rear window defogger switch.
 Performs the timer control of rear window defogger.
Rear window defogger relay Operates the rear window defogger and the door mirror defogger with the control signal from
BCM.

DEF-8
< FUNCTION DIAGNOSIS >
REAR WINDOW DEFOGGER SYSTEM
*: With door mirror defoggerFront air control (rear window
defogger switch) The rear window defogger switch is turned ON.
 Turns the indicator lamp ON when detecting the operation of rear window defogger.
Rear window defogger Heats the heating wire with the power supply from the rear window defogger relay to prevent
the rear window from fogging up.
Door mirror defogger
* Heats the heating wire with the power supply from the rear window defogger relay to prevent
the door mirror from fogging up.

DIAGNOSIS SYSTEM (BCM)
DEF-9
< FUNCTION DIAGNOSIS >
C
D
E
F
G
H
I
J
K
MA
B
DEF
N
O
P
DIAGNOSIS SYSTEM (BCM)
COMMON ITEM
COMMON ITEM : CONSULT-III Function (BCM - COMMON ITEM)INFOID:0000000001697545
APPLICATION ITEM
CONSULT-III performs the following functions via CAN communication with BCM.
SYSTEM APPLICATION
BCM can perform the following functions for each system.
NOTE:
It can perform the diagnosis modes except the following for all subsystem selection items.
REAR WINDOW DEFOGGER
REAR WINDOW DEFOGGER : CONSULT-III Function (BCM - REAR DEFOGGER)
INFOID:0000000001697546
Data monitor
ACTIVE TEST
Diagnosis mode Function Description
WORK SUPPORT Changes the setting for each system function.
SELF-DIAG RESULTS Displays the diagnosis results judged by BCM. Refer to XX-XX, "*****"
.
CAN DIAG SUPPORT MNTR Monitors the reception status of CAN communication viewed from BCM.
DATA MONITOR The BCM input/output signals are displayed.
ACTIVE TEST The signals used to activate each device are forcibly supplied from BCM.
ECU IDENTIFICATION The BCM part number is displayed.
CONFIGURATION This function is not used even though it is displayed.
System Sub system selection itemDiagnosis mode
WORK SUPPORT DATA MONITOR ACTIVE TEST
Rear window defogger REAR DEFOGGER××
BCM BCM×
Monitor Item Description
REAR DEF SW Indicates [ON/OFF] condition of rear defogger switch switch.
PUSH SW Indicates [ON/OFF] condition of push switch.
Test Item Description
REAR DEFOGGERThis test is able to check rear window defogger operation. Rear window defogger operates when
“ON” on CONSULT-III screen is touched.

DEF-10
< FUNCTION DIAGNOSIS >
CAN COMMUNICATION
CAN COMMUNICATION
System DescriptionINFOID:0000000001697547
Refer to XX-XX, "*****".

REAR WINDOW DEFOGGER SWITCH
DEF-11
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
MA
B
DEF
N
O
P
COMPONENT DIAGNOSIS
REAR WINDOW DEFOGGER SWITCH
DescriptionINFOID:0000000001697548
 The rear window defogger is operated by turning the rear window defogger switch ON.
 Turns the indicator lamp in the rear window defogger switch ON when operating the rear window defogger.
Component Function CheckINFOID:0000000001697549
1. CHECK REAR WINDOW DEFOGGER SWITCH FUNCTION
Check that the indicator lamp of rear window defogger illuminates with rear window defogger switch ON.
Is the inspection result normal?
YES >> Rear window defogger switch function is OK.
NO >> Refer to DEF-11, "
Diagnosis Procedure".
Diagnosis ProcedureINFOID:0000000001697550
1. CHECK CONTROLLER (AUTO AMP.) (REAR WINDOW DEFOGGER SWITCH)
Does controller (auto amp.) operate normally?
Is the inspection result normal?
YES >> Inspection End.
NO >> GO TO 2
2. CHECK REAR WINDOW DEFOGGER SWITCH INDICATOR CIRCUIT
1. Turn ignition switch ON.
2. Check voltage between controller (auto amp.) connector and
ground.
Is the inspection result normal?
YES >> Repair or replace harness.
NO >> Replace controller (auto amp.). Refer to XX-XX, "*****"
.
Te r m i n a l s
Condition of rear
window defogger
switchVoltage (V)
(Approx.) (+)
(–) Controller (auto
amp.) connec-
torTe r m i n a l
M37 22 GroundON Battery voltage
OFF 0
ALLIA0174ZZ

DEF-12
< COMPONENT DIAGNOSIS >
REAR WINDOW DEFOGGER RELAY
REAR WINDOW DEFOGGER RELAY
DescriptionINFOID:0000000001697551
Power is supplied to the rear window defogger with BCM control.
Component Function CheckINFOID:0000000001697552
1. CHECK REAR WINDOW DEFOGGER RELAY POWER SUPPLY CIRCUIT
Check that an operation noise of rear window defogger relay [located in fuse block (J/B)] can be heard when
turning the rear window defogger switch ON.
Is the inspection result normal?
YES >> Rear window defogger relay power supply circuit is OK.
NO >> Refer to DEF-12, "
Diagnosis Procedure".
Diagnosis ProcedureINFOID:0000000001697553
1. CHECK REAR WINDOW DEFOGGER RELAY GROUND CIRCUIT
1. Turn ignition switch ON.
2. Check voltage between BCM connector and ground.
Is the inspection result normal?
YES >> Rear window defogger power supply circuit is OK.
NO >> GO TO 2
2. CHECK HARNESS CONTINUITY
1. Turn ignition switch OFF.
2. Disconnect BCM and fuse block (J/B).
3. Check continuity between BCM connector (A) and fuse block (J/
B) connector (B).
Is the inspection result normal?
YES >> GO TO 3
NO >> Repair or replace harness.
3. CHECK REAR WINDOW DEFOGGER RELAY
Check rear window defogger relay.
Refer to DEF-13, "
Component Inspection".
Is the inspection result normal?
YES >> GO TO 4
NO >> Replace rear window defogger relay.
4. CHECK INTERMITTENT INCIDENT
Check intermittent incident.
Refer to XX-XX, "*****"
Is the inspection result normal?
YES >> Check the following.
Te r m i n a l s
Condition of rear
window defogger
switchVoltage (V)
(Approx.) (+)
(–)
BCM connector Terminal
M18 59 GroundON 0
OFF Battery voltage
ALLIA0175ZZ
BCM connector TerminalFuse block (J/B)
connectorTerminal Continuity
M18 (A) 59 M4 (B) 4Q Yes
ALLIA0176ZZ

REAR WINDOW DEFOGGER RELAY
DEF-13
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
MA
B
DEF
N
O
P
 Battery power supply circuit.
 Fuse block (J/B).
NO >> Repair or replace the malfunctioning parts.
Component InspectionINFOID:0000000001697554
1. CHECK REAR WINDOW DEFOGGER RELAY
Check rear window defogger relay.
Is the inspection result normal?
YES >> Inspection End.
NO >> Replace rear window defogger relay.
Te r m i n a l
Condition Continuity
Rear window
defogger relay
3512V direct current supply between termi-
nals 1 and 2.Ye s
No current supply No
SEF497Y

DEF-14
< COMPONENT DIAGNOSIS >
REAR WINDOW DEFOGGER POWER SUPPLY AND GROUND CIRCUIT
REAR WINDOW DEFOGGER POWER SUPPLY AND GROUND CIRCUIT
DescriptionINFOID:0000000001697555
Heats the heating wire with the power supply from the rear window defogger relay to prevent the rear window
from fogging up.
Component Function CheckINFOID:0000000001697556
1. CHECK REAR WINDOW DEFOGGER
Check that the heating wire of rear window defogger is heated when turning the rear window defogger switch
ON.
Is the inspection result normal?
YES >> Rear window defogger is OK.
NO >> Refer to DEF-14, "
Diagnosis Procedure".
Diagnosis ProcedureINFOID:0000000001697557
1. CHECK POWER SUPPLY CIRCUIT
1. Turn ignition switch ON.
2. Check voltage between rear window defogger connector and
ground.
Is the inspection result normal?
YES >> GO TO 2
NO >> GO TO 3
2. CHECK GROUND CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect rear window defogger.
3. Check continuity between rear window defogger connector and
ground.
Is the inspection result normal?
YES >> GO TO 5
NO >> Repair or replace harness.
3. CHECK HARNESS CONTINUITY 1
Te r m i n a l s
Condition of rear
window
defogger switchVoltage (V)
(Approx.) (+)
(–) Rear window
defogger
connectorTe r m i n a l
B53 1 GroundON Battery voltage
OFF 0
ALLIA0177ZZ
Rear window defogger connector Terminal
GroundContinuity
B54 2 Yes
ALLIA0178ZZ

REAR WINDOW DEFOGGER POWER SUPPLY AND GROUND CIRCUIT
DEF-15
< COMPONENT DIAGNOSIS >
C
D
E
F
G
H
I
J
K
MA
B
DEF
N
O
P
1. Turn ignition switch OFF.
2. Disconnect condenser and rear window defogger.
3. Check continuity between condenser connector (A) and rear
window defogger connector (B).
Is the inspection result normal?
YES >> GO TO 4
NO >> Replace condenser. Refer to DEF-38, "
Removal and
Installation".
4. CHECK HARNESS CONTINUITY 2
1. Disconnect fuse block (J/B).
2. Check continuity between fuse block (J/B) connector (A) and
condenser connector (B).
Is the inspection result normal?
YES >> GO TO 6
NO >> Replace or repair harness.
5. CHECK FILAMENT
Check filament.
Refer to DEF-15, "
Component Inspection".
Is the inspection result normal?
YES >> Refer to XX-XX, "*****".
NO >> Repair filament. Refer to DEF-36, "
Inspection and Repair".
6. CHECK INTERMITTENT INCIDENT
Check intermittent incident.
Refer to XX-XX, "*****"
.
Is the inspection result normal?
YES >> Check the following.
 Battery power supply circuit.
 Fuse block (J/B).
NO >> Repair or replace the malfunctioning parts.
Component InspectionINFOID:0000000001697558
1. CHECK FILAMENT
Check the filament for damage or open circuits.
Refer to DEF-36, "
Inspection and Repair".
Is the inspection result normal?
YES >> Inspection End.
NO >> Repair filament. Refer to DEF-36, "
Inspection and Repair".
Condenser
connectorTe r m i n a lRear window defogger
connectorTerminal Continuity
B52 (A) 1 B53 (B) 1 Yes
ALLIA0179ZZ
Fuse block (J/B)
connectorTe r m i n a lCondenser
connectorTerminal Continuity
B4 (A)10T
B52 (B) 1 Yes
11T
ALLIA0180ZZ

DEF-16
< COMPONENT DIAGNOSIS >
DRIVER SIDE DOOR MIRROR DEFOGGER
DRIVER SIDE DOOR MIRROR DEFOGGER
DescriptionINFOID:0000000001697559
Heats the heating wire with the power supply from the rear window defogger relay to prevent the door mirror
from fogging up.
Component Function CheckINFOID:0000000001697560
1. CHECK DOOR MIRROR DEFOGGER LH
Check that heating wire of door mirror defogger LH is heated when turning the rear window defogger switch
ON.
Is the inspection result normal?
YES >> Door mirror defogger is OK.
NO >> Refer to DEF-16, "
Diagnosis Procedure".
Diagnosis ProcedureINFOID:0000000001697561
1. CHECK POWER SUPPLY CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect door mirror LH.
3. Turn ignition switch ON.
4. Check voltage between door mirror LH connector and ground.
Is the inspection result normal?
YES >> GO TO 2
NO >> Repair or replace harness.
2. CHECK GROUND CIRCUIT
1. Turn ignition switch OFF.
2. Check continuity between door mirror LH connector and ground.
Is the inspection result normal?
YES >> GO TO 3
NO >> Repair or replace harness.
3. CHECK DOOR MIRROR DEFOGGER LH
Check door mirror defogger LH.
Refer to DEF-17, "
Component Inspection".
Is the inspection result normal?
YES >> GO TO 4
NO >> Replace door mirror. Refer to XX-XX, "*****"
.
4. CHECK INTERMITTENT INCIDENT
Check intermittent incident.
Te r m i n a l s
Condition of
rear window
defogger
switchVoltage (V)
(Approx.) (+)
(–)
Door mirror LH
connectorTe r m i n a l
D4 1 GroundON Battery voltage
OFF 0
ALLIA0181ZZ
Door mirror LH connector Terminal
GroundContinuity
D4 2 Yes
ALLIA0184ZZ