PEUGEOT 108 2016 Owners Manual
Manufacturer: PEUGEOT, Model Year: 2016, Model line: 108, Model: PEUGEOT 108 2016Pages: 268, PDF Size: 6.17 MB
Page 131 of 268

129
108_en_Chap06_securite_ed01-2016
Child seats recommended by PeugeOt
group 0+: from bir th to 13 kggr oups 2 and 3: from 15 to 36 kg
L1
"RÖM
eR B
aby-Safe Plus"
Installed in the rearward facing position. L4
"KLIPPAN Optima"
From 22 kg (approximately 6 years), the booster is used on its own. L5
"RÖM
eR
KIDFIX"
Can be fitted to the vehicle's ISOFIX mountings.
th
e child is restrained by the seat belt.
P
e
uge
Ot
offers a range of recommended child seats which are secured using a three point
seat
belt
.
6
Safety
Page 132 of 268

130
108_en_Chap06_securite_ed01-2016
Installation of child seats attached using the seat
belt
In accordance with european regulations, this table indicates the options for installing child seats secured using a seat belt and universally approved (a)
in accordance with the weight of the child and the seat in the vehicle.
Weight of the child and indicative age
Seat
un
der 13 kg
gr
oups 0 (b) and 0+
up t
o about 1 yearFrom 9 to 18 kg
gr
oup 1
From about 1 to 3 years From 15 to 25 kg
gr
oup 2
From about 3 to 6 years From 22 to 36 kg
gr
oup 3
From about 6 to 10 years
Front passenger seat (c) (e)u (R)*u (R)*u (R)*u (R)*
Rear seats (d)
u uuu
*
O
n a front seat:
-
F
or the installation of a child seat with a base: if there is inter ference with the vehicle's seat backrest when fitting a child seat with base, adjust the
backrest until there is no longer any interference.
-
F
or the installation of a for ward facing child seat: if there is a gap between the child seat and the vehicle seat's backrest, adjust the backrest until the
child seat is in contact with the backrest. If the upper seat belt anchorage is in front of the belt guide on the child seat, move the vehicle seat for ward.
-
F
or the installation of a booster cushion: if the child is in a too vertical position, adjust the backrest to give a more comfortable position. If the upper
seat belt anchorage is in front of the belt guide on the child seat, move the vehicle seat for ward.
Safety
Page 133 of 268

131
108_en_Chap06_securite_ed01-2016
a: universal child seat: child seat that can be installed in any vehicle using the vehicle's
seat belt.
b :
g
r
oup 0: from birth to 10 kg. Infant car
seats and "car cots" cannot be installed on
the front passenger seat
W
hen installed on the 2
nd row, they may
prevent the use of the other seats
c :
R
efer the legislation in force in your country
before installing your child on this seat.
d :
t
o i
nstall a child seat on a rear seat,
rear ward or for ward facing, move
the vehicle's seats in front for wards
and straighten the backrests to leave
enough space for the child seat and the
child's
legs.
e :
W
hen a rear ward facing child seat is
installed on the front passenger seat ,
the passenger's front airbag must be
deactivated. Otherwise, the child would
risk being seriously injured or killed
during deployment of the airbag .
W
hen a for ward facing child seat is
installed on the front passenger seat ,
the passenger's front airbag must remain
active. Remove and stow the head restraint
before installing a child seat with a
backrest on a passenger seat. Refit the
head restraint once the child seat has
been removed.
u:
S
eat suitable for the installation of a
universally approved child seat secured
using a seat belt, rear ward facing and/or
forward facing, with the passenger seat
adjusted to the midway longitudinal position.
u
(R)
:
s
ame as for u
, w
ith the vehicle's seat in
the fully back position and the backrest
straightened.
6
Safety
Page 134 of 268

132
108_en_Chap06_securite_ed01-2016
Your vehicle has been approved in accordance
with the latest ISOFIX regulation .
th
e seats, represented below, are fitted with
regulation IS
oF
IX mountings:
"ISOFIX" mountings
there are three mountings for each seat: -
a m
ounting B behind the seat for fixing
the upper strap, referred to as the to
P te
t H
eR
. I t is identified by a marking.
th
e to
P
tet
HeR
is used to secure the
upper strap of child seats that have one.
t
h
is
arrangement limits the forward tipping of the
child seat in the event of a front impact.
th
is IS
oF
IX mounting system provides fast,
reliable and safe fitting of the child seat in your
vehicle. Follow the instructions for fitting
child seats contained in the seat
manufacturer's installation guide.
th
e incorrect installation of a child seat
in a vehicle compromises the child's
protection in the event of an accident.
th
e IS
oF
IX child seats are fitted with
two latches which are secured on the two
mountings A .
Some seats also have an upper strap ,
known as the
t
o
p t
e
ther, which is attached to
mounting B .
to s
ecure the child seat to the to
P
tet
HeR
:
-
r
emove and stow the head restraint before
installing the child seat in this seating
position (refit it once the child seat has
been removed),
-
p
ass the strap of the child seat over the
top of the seat backrest, between the
apertures for the head restraint rods,
-
f
ix the hook of the upper strap to the
anchorage B ,
-
t
ighten the upper strap.
For information on the possibilities for installing
IS
oF
IX child seats in your vehicle, refer to the
summary table.
-
t
wo mountings A , located between the
vehicle seat back and cushion, indicated by
a marking,
Safety
Page 135 of 268

133
108_en_Chap06_securite_ed01-2016
Baby P2C Mini and its ISoFIX base
(size categories: C, D, e)
gr
oup 0+: from bir th to 13 kg
Installed rearward facing using an ISOFIX
base which is attached to the anchorage
rings A .
th
e base has a support leg, adjustable for
height, which sits on the vehicle's floor.
th
is seat can also be secured with
a seat belt.
In this case only the seat shell is used and is
attached to the vehicle's seat by the three-
point seat belt.
ISOFIX child seats recommended by Pe ugeOt
PeugeOt offers a range of ISOFIX child seats listed and type approved for your vehicle.
Refer also to the child seat manufacturer's fitting instructions for information on installing and removing the seat.
th
e ISOFIX BABY P2C base must be installed so that on the ISOFIX clamps, the N
os 3, 4 and 5 are visible. And the support leg must have 6 holes visible.
"RÖM
eR B
aby- Safe Plus"
and its IS
oF
IX base
(size category:
e
)
gr
oup 0+: from bir th to 13 kg
Installed rearward facing using an ISOFIX
base which is attached to the rings A .
th
e base has a support leg, adjustable for
height, which sits on the vehicle's floor.
th
is child seat can also be secured with a
seat belt. In this case, only the shell is used
and attached to the vehicle's seat by the
three-point seat belt.
6
Safety
Page 136 of 268

134
108_en_Chap06_securite_ed01-2016
"Baby P2C Midi" and its ISoF IX base
(size categories: D, C, A, B, B1 )
gr
oup 1: from 9 to 18 kg
Installed rearward facing using an ISOFIX
base which is attached to the anchorage
rings A .
th
e base has a support leg, adjustable for
height, which sits on the vehicle's floor.
th
is child seat can also be used for ward
facing.
th
is seat can not be secured with a seat
belt.
We recommend that you use the seat in the
rear ward facing position up to the age
of 3 years. "RÖMeR D
uo Plus ISoF IX"
(size category: B1 )
gr
oup 1: from 9 to 18 kg
Is installed only in the for ward facing
position.
Is attached to the anchorage rings A and the
upper anchorage ring B , referred to as the
tO
P tet
HeR
, using an upper strap.
th
ree seat body angles: sitting, reclining,
lying down.
We recommend the lying down position.
th
is child seat can also be used on seats
not equipped with ISOFIX mountings. In
this case, it must be secured to the vehicle's
seat by the three-point seat belt. Adjust the
position of the vehicle's front seat so that the
child's feet are not touching the backrest.
Safety
Page 137 of 268

135
108_en_Chap06_securite_ed01-2016
table of locations for ISOFIX child seats
In accordance with the european regulation, this table indicates the options for the installation of ISOFIX child seats on the vehicle seats fitted with
ISOFIX mountings.
In the case of the universal and semi-universal ISOFIX child seats, the child seat's ISOFIX size category, determined by a letter between A and
g
, i
s
indicated on the child seat next to the ISOFIX logo.
I
u
F:
S
eat suitable for the installation of an
un
iversal I sofix seat, F or ward facing with
the "
to
p t
e
ther" upper strap.
IL- S
u:
S
eat suitable for the installation of a
S emi-
un
iversal ISOFIX seat, that is:
-
r
ear ward facing fitted with an upper strap
or a support leg
-
f
or ward facing fitted with a support leg
-
a
n infant carrier fitted with an upper strap
or a support leg. Weight of the child / indicative age
Less than 10 kg (group 0)
up t
o about
6
monthsLess than 10 kg
(group 0)
Less than 13 kg (group 0+)
up t
o about 1 yearFrom 9 to 18 kg (group 1)
From about 1-3 years
ty
pe of IS
oF
IX child seat Infant carrierrearward facing rearward facing forward facing
IS
oF
IX size categor y F
gC DeC DABB1
F
ront passenger seat Not ISOFIX
Rear seats XIL- S
u
(2
)I L- S
u (
1)IL- S
u
(2
)IL- S
u
(
1)I
u
F
IL- S
u
R
emove and stow the head restraint
before installing a child seat with a
backrest on a passenger seat. Refit the
head restraint once the child seat has
been removed.
to a
ttach the upper strap, refer to the "ISOFIX
mountings" section.
(1) :
t
h
e front seat must be adjusted to
9
notches back from the fully for ward
position.
(2):
t
h
e front seat must be adjusted to
4
notches back from the fully for ward
position.
6
Safety
Page 138 of 268

136
108_en_Chap06_securite_ed01-2016
the incorrect installation of a child seat in a
vehicle compromises the child's protection in
the event of an accident.
Check that there is no seat belt or seat belt
buckle under the child seat as this could
destabilise it.
Remember to fasten the seat belts or the
child seat harnesses keeping the slack in
relation to the child's body to a minimum,
even for short journeys.
For the installation of a child seat using a
seat belt, ensure that this is well tensioned
on the child seat and that it is holding the
child seat firmly against the seat of your
vehicle. If your front passenger seat is
adjustable, move it forward if necessary.
At the rear seats, always leave sufficient
space between the front seat and:
-
a r
ear ward facing child seat,
-
t
he feet of a child seated in a for ward
facing child seat.
For this, move the front seat for ward and if
necessary straighten its backrest.
Recommendations on child seats
the chest part of the seat belt must be
positioned on the child's shoulder without
touching the neck.
en
sure that the lap part of the seat belt
passes correctly over the child's thighs.
P
e
uge
Ot
recommends the use of a booster
seat which has a back, fitted with a seat belt
guide at shoulder level.
As a safety precaution, never leave:
-
o
ne or more children alone and
unsupervised in a vehicle,
-
a c
hild or an animal in a vehicle which
is exposed to the sun, with the windows
closed,
-
t
he keys within reach of children inside
the vehicle.
to p
revent accidental opening of the doors,
use the "Child lock".
ta
ke care not to open the rear windows by
more than one third.
to p
rotect young children from the rays of
the sun, fit side blinds on the rear windows.
th
e legislation on carrying a child on the
front passenger seat is specific to each
country. Refer to the legislation in force in
your country.
Deactivate the passenger's front airbag
when a rear ward facing child seat is installed
on the front seat. Otherwise, the child would
risk being seriously injured or killed if the
airbag were deployed. For optimum installation of the forward facing
child seat, ensure that the back of the child
seat is as close as possible to the backrest
of the vehicle's seat, or in contact if possible.
th
e head restraint must be removed before
installing a child seat with a backrest on the
passenger seat.
en
sure that the head restraint is stowed or
attached securely so that it is not thrown
around the vehicle in the event of sharp
braking.
Refit the head restraint as soon as the child
seat is removed.
Installing a booster
cushion
Children at the front
Safety
Page 139 of 268

137
108_en_Chap06_securite_ed01-2016
Child lock
this prevents the opening of the rear doors
from the inside.
th
e controls are located on the edge of each
rear door.
F
L
ower the control.
Check the status of this safety device before
switching on the ignition.
th
is system is independent of the central
locking.
6
Safety
Page 140 of 268

138
108_en_Chap07_info-pratiques_ed01-2016
Fuel tank
Low fuel levelRefuelling
When the low fuel level is reached,
this warning lamp comes on,
accompanied by an audible signal.
th
e message "LO F
u
e
L
" is displayed in place
of the range.
You have approximately 5 litres remaining.
In certain driving conditions and depending on
the engine, the distance which can be travelled
with the fuel remaining may be less than
30
miles (50 km).
to r
efuel in complete safety:
F
Y
ou must stop the engine and switch off
the ignition (ignition in "L
oC
K" position
or "
oF
F" mode).
F
P
ull the control on the lower dashboard,
driver's side, to release the filler flap.
F
O
pen the fuel filler flap.
If you run out of fuel, the emission
control system warning lamp may come
on in the instrument panel. It will go off
automatically after the engine has been
started a few times. Refuelling must only be done with the engine
stopped
and the ignition switched off (ignition
switch in the " L
o
C
K" position or "
oFF "
m o d e).
th
e capacity of the fuel tank is approximately 35 litres.
Additions of fuel must be of at least 5 litres to
be registered by the fuel gauge.
A label on the inside of the flap reminds you
which type of fuel to use.
th
ere may be an inrush of air when removing
the filler cap.
t
h
is vacuum is per fectly normal
and results from the sealing of the fuel system.
Practical information