seats Peugeot 207 CC 2014 Owner's Manual

2
CONTENTS
207CC_EN_CHAP00A_SOMMAIRE_ED01-2014

■ Instrument panels 20

■ Indicator and warning lamps 21

■ Indicators 28

■ Adjustment buttons 32

■ Screens without audio
equipment 33

■ Screens with audio equipment 35

■ 16/9 colour screen
(PEUGEOT Connect Navigation) 40

■ Trip computer 42
■ Ventilation 45

■ Heating 47

■ Manual air conditioning 47

■ Rear screen demist - defrost 49

■ Digital air conditioning 50

■ Seats 52

■ Steering wheel adjustment 54

■ Mirrors 55

■ Interior fi ttings 57

■ Windstop 62
COMFORT 45  64

■ Remote control key 65

■ Alarm 69

■ Window controls 71

■ Doors 73

■ Boot 76

■ Fuel tank 77

■ Misfuel prevention (Diesel) 79
ACCESS 65  79

■ Lighting control stalk 80

■ Static directional lighting 83

■ Headlamp adjustment 83

■ Wiper control stalk 84

■ Courtesy lamp 85
VISIBILITY 80  85

■ Conventional child seats 86

■ Deactivating the passenger's
front airbag 87

■ ISOFIX child seats 94
CHILD
SAFETY 86  96
FAMILIARISATION 4
 17
MONITORING
20  445
4
3
2
1
ECO-DRIVING 18  19

4
FAMILIARISATION
207CC_EN_CHAP00B_PRISE EN MAIN_ED01-2014
EXTERIOR
Retractable roof
This system enables you to change the
vehicle from "coupé" to "cabriolet" con-
fi guration and vice versa with a single
action.
Static directional lighting
This additional lighting automatically
provides extended visibility when
turning.
Visual and audible rear parking
sensors
This system provides a warning when
reversing by detecting obstacles located
behind the vehicle.
Under-inflation detection
This system monitors the pressure in
each tyre and warns you of a punc-
ture or drop in pressure.
Turbulence prevention
net (Windstop)
In "cabriolet" confi guration, this
system reduces the wind turbu-
lence in the front seats.
Temporary puncture repair kit
This kit is a complete system, con-
sisting of a compressor and an inte-
gral sealant, for the temporary repair
of a punctured tyre.
 6
 83
 99
 128 61
 11 8

i
!
11
FAMILIARISATION
207CC_EN_CHAP00B_PRISE EN MAIN_ED01-2014
SITTING COMFORTABLY
Also...
5. Access to the rear seats.
6. Heated seat.
Front seat adjustment Steering wheel adjustment
1. Forwards-backwards adjustment.
2. Height adjustment.
3. Seat back angle adjustment.
4. Head restraint height adjustment. 1. Unlocking the control.
2. Adjustment for height and reach.
3. Locking the control.
As a safety precaution, these op-
erations must only be carried out
while stationary.
 52  54

19
207CC_EN_CHAP00B_PRISE EN MAIN_ED01-2014
Limit the causes of excess consumption
Spread loads throughout the vehicle; place the heaviest
items in the bottom of the boot, as close as possible to the
rear seats.
Limit the loads carried in the vehicle and reduce wind resis-
tance (roof bars, roof rack, bicycle carrier, trailer...). Use a
roof box in preference.
Remove roof bars and roof racks after use. Have your vehicle serviced regularly (engine oil, oil fi lter,
air fi lter, passenger compartment fi lter...) and observe the
schedule of operations recommended in the warranty and
maintenance record.
When refuelling, do not continue after the third cut-off of the
nozzle to avoid any overfl ow.
At the end of winter, remove snow tyres and refi t your summer
tyres.
Observe the recommendations on maintenance
Check the tyre pressures regularly, when cold, referring to
the label in the door aperture, driver's side.
Carry out this check in particular:
- before a long journey,
- at each change of season,
- after a long period out of use.
Don't forget the spare wheel and the tyres on any trailer or
caravan.
At the wheel of your new vehicle, it is only after the fi rst
1 800 miles (3 000 kilometres) that you will see the fuel con-
sumption settle down to a consistent average.

2
!
COMFORT
52
207CC_EN_CHAP02_CONFORT_ED01-2014
FRONT SEATS
Seat consisting of a seat cushion, seat
back and head restraint which can all
be adjusted to adapt your position for
maximum ease of driving and comfort.
1. Forwards-backwards adjustment
 Lift the control and slide the seat for-wards or backwards. 2. Driver's or passenger's seat
height adjustment
 Pull the lever upwards or push it downwards as many times as nec-
essary to obtain the required posi-
tion. 3. Seat back angle adjustment
 Push the lever towards the rear.
Before moving the seat backwards, ensure that there is nothing that migh\
t prevent the full travel of the seat, so as to
avoid the risk of of jamming the seat caused by the presence of objects on the fl oor behind the seat or rear passengers.
If the seat jams, stop the movement immediately.

2
!
!
COMFORT
53
207CC_EN_CHAP02_CONFORT_ED01-2014
4. Access to rear seats
 Pull the lever to fold the seat back and move the seat forwards.
On repositioning, the seat returns to its initial position.
 To raise the head restraint, pull it up-wards.
 To remove the head restraint, press the lug A and pull the head restraint
upwards.
 To put the head restraint back in po- sition, locate the stems of the head
restraint in the holes, taking care to
keep them in line with the seat back.
 To lower the head restraint, press the lug A and the head restraint at
the same time.
No person or object must prevent
the seat runner from returning to
its initial position; return to this po-
sition is necessary for the seat to
lock in place. 5. Head restraint height adjustment
The head restraint has a frame with
a notch which prevents the head
restraint from lowering; this is a
safety device which provides pro-
tection in the event of an impact.
The adjustment is correct when
the upper edge of the head re-
straint is level with the top of the
head.
Never drive with the head restraints
removed; they must be in place
and correctly adjusted.

2
!i!
COMFORT
54
207CC_EN_CHAP02_CONFORT_ED01-2014
REAR SEATS
Fixed two-seat bench fi tted with roll-
over bars to ensure your protection
should the vehicle roll over. Following an accident, have the roll-
over bars checked by a PEUGEOT
dealer.
STEERING WHEEL ADJUSTMENT
 When stationary , pull the control lever to release the adjustment
mechanism.
 Adjust the height and reach to suit your driving position.
 Push the control lever to lock the ad- justment mechanism.
As a safety precaution, these op-
erations should only be carried out
with the vehicle stationary.
6. Heated seats switch
With the engine running, the front seats
can be heated separately.
 Use the adjustment dial, placed on
the side of each front seat, to switch
on and select the level of heating re-
quired:
0 : Off.
1 : Low.
2 : Medium.
3 : High
The seat heating switch settings
remain memorised for two min-
utes after the ignition has been
switched off.

4
i
83
VISIBILITY
207CC_EN_CHAP04_VISIBILITE_ED01-2014
STATIC DIRECTIONAL
LIGHTING
When the dipped or main beam head-
lamps are on, this function enables the
beam to light the inside of the turn with
an additional angle of approximately 30°.
The use of this lighting is optimum above
all at low and average speed (city driving,
winding roads, ...). with directional lighting
without directional lighting
Programming Switching on
The system is switched on from a cer-
tain speed and a certain angle of rota-
tion of the steering wheel.
Operating fault
The function is activated or
deactivated via the multi-
function screen confi gura-
tion menu.
This function is activated
by default.
In the event of a malfunction,
this warning lamp fl ashes on
the instrument panel, accompa-
nied by a message in the multi-
function screen.
Have it checked by a PEUGEOT dealer
or a qualifi ed workshop.
HEADLAMP ADJUSTMENT
The initial setting is position "0" .
To avoid causing a nuisance to other
road users, the height of the headlamps
should be adjusted in relation to the
load in the vehicle.
0.
1 or 2 people in the front seats.
-. 3 people.
1. 4 people.
2. 4 people + maximum authorised load.
3. Driver + maximum authorised load.
Switching off
The system is switched off below a certain
angle of rotation of the steering wheel.
It is switched off when reverse gear is
engaged.
Travelling abroad
If using your vehicle in a country that
drives on the other side of the road, the
headlamps must be adjusted to avoid
dazzling on-coming drivers.
Contact a PEUGEOT dealer or a quali-
fi ed workshop.

5
i
CHILD SAFETY
86
207CC_EN_CHAP05_SECURITE ENFANTS_ED01-2014
PEUGEOT recommends that chil-
dren should travel in these positions:
- " rearward facing" up to the age of 2 on the front passen-
ger seat ,
- " forward facing" over the age of 2 on the outer rear seat .
For further details, see section
"Locations for child seats secured
using a seat belt".
GENERAL POINTS RELATING
TO CHILD SEATS
Although one of PEUGEOT's main cri-
teria when designing your vehicle, the
safety of your children also depends on
you.
For maximum safety, please follow
these recommendations:
- in accordance with European regu- lations, all children under the age
of 12 or less than one metre fi fty
tall must travel in approved child
seats suited to their weight , on
seats fi tted with a seat belt or ISOFIX
mountings * .
- statistically, the safest seats in your vehicle for carying children
are the rear seats,
- a child weighing less than 9 kg must travel in the " rearward fac-
ing" position both in the front and
in the rear.
CHILD SEAT IN THE FRONT
"Forwards facing"
When a "forward facing" child seat is
installed on the front passenger seat ,
adjust the vehicle's seat to the interme-
diate longitudinal position with the seat
back upright and leave the passenger
airbag activated.
"Rearward facing"
When a "rearward facing" child seat is
installed on the
front passenger seat ,
it is essential that the passenger air bag
is deactivated. Otherwise, the child
would risk being seriously injured or
killed if the airbag were to infl ate .
Intermediate longitudinal position
* The rules for carrying children are specifi c to each country. Consult the
current legislation in your country.

5
i
CHILD SAFETY
90
207CC_EN_CHAP05_SECURITE ENFANTS_ED01-2014
CHILD SEAT AT THE REAR
"Rearward facing"
When a "rearward facing" child seat is
installed on a rear passenger seat ,
move the vehicle's front seat forwards
and straighten the backrest so that the
"rearward facing" child seat does not
touch the vehicle's front seat.
"Forward facing"
When a "forward facing" child seat is
installed on a rear passenger seat ,
move the vehicle's front seat forwards
and straighten the backrest so that the
legs of the child in the "forward facing"
child seat do not touch the vehicle's
front seat.
Ensure that the seat belt is cor-
rectly tensioned.
For child seats with a support leg,
ensure that this is in fi rm contact
with the fl oor. If necessary, adjust
the front seat of the vehicle.