display Peugeot 208 2015 Owner's Guide

Driving115
208_en_Chap06_conduite_ed01-2016
Eco-driving
Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2 emissions.
Optimise the use of your gearbox
With a manual gearbox, move off gently and change up without waiting.
During acceleration change up early.
With an automatic or electronic gearbox, give preference to automatic
mode and avoid pressing the accelerator pedal heavily or suddenly.
The gear shift indicator invites you to engage the most suitable gear:
as soon as the indication is displayed in the instrument panel, follow it
straight away.
For vehicles fitted with an electronic or automatic gearbox, this
indicator appears only in manual mode.
Drive smoothly
Maintain a safe distance between vehicles, use engine braking rather
than the brake pedal, and press the accelerator progressively. These
practices contribute towards a reduction in fuel consumption and
CO
2 emissions and also helps reduce the background traffic noise.
I
f your vehicle has cruise control, make use of the system at speeds
above 25 mph (40 km/h) when the traffic is flowing well.
Control the use of your electrical
equipment
Before moving off, if the passenger compartment is too warm, ventilate it
by opening the windows and air vents before using the air conditioning.
Above 30 mph (50 km/h), close the windows and leave the air vents
open.
Remember to make use of equipment that can help keep the
temperature in the passenger compartment down (sunroof and window
blinds...).
Switch off the air conditioning, unless it has automatic regulation, as
soon as the desired temperature is attained.
Switch off the demisting and defrosting controls, if not automatic.
Switch off the heated seat as soon as possible.
Switch off the headlamps and front foglamps when the level of light
does not require their use.
Avoid running the engine before moving off, particularly in winter; your
vehicle will warm up much faster while driving.
As a passenger, if you avoid connecting your multimedia devices
(film, music, video game...), you will contribute towards limiting the
consumption of electrical energy, and so of fuel.
Disconnect your portable devices before leaving the vehicle.
6

Driving
118
208_en_Chap06_conduite_ed01-2016
Starting
Gearbox Ignition
Avoid attaching heavy objects to the
key or the remote control, which would
weigh down on its blade in the ignition
switch and could cause a malfunction.
It could adversely affect the deployment
of the front airbag.
The original key contains a coded electronic chip.
When the ignition is switched on, starting is only
possible if the code is detected and recognised.
This protection against theft locks the engine
management system a few moments after the
ignition is switched off and prevents starting of
the engine following a break-in.
Electronic engine immobiliser
Keep away from your vehicle, the
label attached to the keys given to you
on acquisition of the vehicle. It will
help in finding the original code for
replacement of the key.
In the event of a fault, you are informed
by illumination of the warning lamp, an
Manual
F Place the gear lever in neutral.Advice
Automatic
F Place the gear lever at position P or N .
Electronic
F Place the gear lever at position N.
Steering wheel
In some cases, you may have to apply
some force to turn the steering (if the
wheels are on lock against a kerb, for
example).
Starting
F Insert the key into the ignition switch. T
he system recognises the starting code.
F

U
nlock the steering column by
simultaneously turning the steering wheel
and the key.
F

T
urn the key towards the dashboard to
position 3 (Starting) .
F

W
hen the engine starts, release the key. audible signal and the display of a message.
In this case, your vehicle will not start; contact a
PEUGEOT dealer as soon as possible.

Driving119
208_en_Chap06_conduite_ed01-2016
Moving off - Gearbox
Electronic Automatic
Do not drive with your hand resting on
the gear lever as this risks damaging
the gearbox. F

R
elease the parking brake.
F
Sel
ect position D
.
F P rogressively release the brake pedal.
Manual
F Start the engine.
F

E
ngage first gear.
F

R
elease the parking brake.
F

P
rogressively release the clutch pedal and
accelerate away. F
T o start the engine, place the lever at
position N .
F

P
ress firmly on the brake pedal.
F

S
tart the engine.
F

Sel
ect position A.
F

R
elease the parking brake.
F

P
rogressively release the brake pedal, then
accelerate away. F
A pply the parking brake.
F Sel ect position P or N.
F

S
tart the engine.
There is an audible signal, accompanied by the
display of an alert message, if the gear lever is
not in the right position.
If you move off in position M , remember
to operate the lever or a paddle to
engage the gear. F

W
ith the engine running, press the
brake pedal.
The vehicle then moves off.
F

P
ress the clutch pedal fully down.
6

Driving
120
208_en_Chap06_conduite_ed01-2016
Switching off
Ignition
Key left in the "Ignition on" position
On opening the driver's door, an alert
message is displayed, accompanied
by an audible signal, to remind you that
the key is still in the ignition switch at
position 1 (Stop) .
If the key has been left in the ignition
switch at position 2 (Ignition on) ,
the ignition will be switched off
automatically after one hour.
To switch the ignition back on, turn the
key to position 1 (Stop) , then back to
position 2 (Ignition on) .
Coasting
As a safety measure, do not coast (free-wheeling
in neutral or with the clutch pedal depressed).
Switching off the engine leads to a loss
of braking assistance.
Gearbox
Manual
F Place the gear lever in neutral.
F
Imm obilise the vehicle.
F

A
pply the parking brake.
F

T
urn the key towards you to position 1
(Stop) .
F

R
emove the key from the ignition switch.
Electronic
F Place the gear lever at position N .
F Imm obilise the vehicle.
F

A
pply the parking brake.
F

T
urn the key towards you to position 1
(Stop) .
F

R
emove the key from the ignition switch.
Automatic
F Place the gear lever at position P or N .
F Imm obilise the vehicle.
F

A
pply the parking brake.
F

T
urn the key towards you to position 1
(Stop) .
F

R
emove the key from the ignition switch.
Steering wheel
To facilitate unlocking of the steering
wheel, it is recommended that you
place the wheels in the straight ahead
position before switching off the engine.

Driving
122
208_en_Chap06_conduite_ed01-2016
Only engage reverse gear when the vehicle
is stationary and the engine is at idle.
As a safety precaution and to facilitate
starting of the engine:
-
a
lways select neutral,
-

p
ress the clutch pedal.
6-speed
Engaging reverse gear
Manual gearbox
5-speed
F Move the lever fully to the right to engage 5th or 6th g e a r.
F
M
ove the gear lever fully to the right to
engage 5th g e a r.
Engaging reverse gear
F Move the gear lever fully to the right then back. F
R aise the collar below the gear lever knob,
then push the lever fully to the left and then
forward. The gear shift indicator is displayed in
the instrument panel.
Only engage reverse gear when the
vehicle is stationary and the engine is
at idle.

Driving123
208_en_Chap06_conduite_ed01-2016
Electronic gearbox
5-speed 6-speed
R. Reverse.
N. N
eutral.
A.
A

utomated mode.
M.
M

anual mode.
R. R
everse.
N. N
eutral.
A.
A

utomated mode.
M.
M

anual mode.
Automated mode
This mode allows gear changing without action
by the driver.
Moving off
Lever at position N .
F
P
ress the brake pedal firmly.
F

S
tart the engine.
F

P
lace the lever at A or R .
F

R
elease the brake pedal and press the
accelerator pedal progressively.
If the engine does not start:
-
If N is flashing in the instrument panel,
move the lever to position A then to
position N .
-

I
f the message "Foot on the brake" is
displayed, press firmly on the brake pedal.
The A , R or N position of the lever is indicated
in the display.
You can change from position A to M
and from M to A at any time.
6

Driving
124
208_en_Chap06_conduite_ed01-2016
Stopping - Moving off on a slope
Do not uses the accelerator to hold the vehicle,
but apply the parking brake.
Stopping - Parking
Place the lever at N and apply the parking
brake.
Manual mode
This mode allows manual sequential gear
changing. F

P
ush the lever for ward to change
up.
F

P
ull the lever back to change down.
F

M
ove the selector lever to M .
Steering mounted control paddles
This occasional manual gear changing can
be used for overtaking, for example, while
remaining in automated mode.
F

O
perate the + or - steering mounted control
paddle.
The gearbox engages the gear requested if
the engine speed permits. AUTO remains
displayed in the instrument panel.
After a few moments with no action on the
controls, the gearbox returns to automatic
management of the gears.
Manual gear changing
F Press the back of the "+" paddle to change
up.
F

P
ress the back of the "-" paddle to change
down.
The gear engaged is indicated in the display.

Driving
126
208_en_Chap06_conduite_ed01-2016
Automatic gearbox
P. Park.
R. R everse
N.
N

eutral.
D.
D

rive - AUTO driving mode.
S.
S

port - More dynamic driving.
T

S
now - Driving on snow covered roads.
Display in the instrument panel
Foot on the brake warning
When you select a position with the lever,
the corresponding symbol is displayed in the
instrument panel.
Press the brake pedal when this
comes on in the instrument panel.
Automated mode
This mode allows gear changes without action
by the driver.
Moving off
Parking brake applied.
F S tart the engine.
F

L
ever at position P or N .
F

P
ress firmly on the brake pedal.
F

R
elease the parking brake.
F

P
lace the selector at D or R .
F

R
elease the brake pedal and press
the


accelerator pedal progressively.
The vehicle then moves off.
Never leave children unsupervised in
the vehicles when the engine is running.

Driving127
208_en_Chap06_conduite_ed01-2016
Advice
F Select position D for automatic
changing of the gears.
The gearbox then operates in auto-adaptive
mode, without action by the driver. It
continuously selects the most suitable gear for
the driving style, the relief of the road and the
load in the vehicle.
For maximum acceleration, without touching
the gear lever, press the accelerator pedal fully
down (kick down). The gearbox changes down
automatically or holds the gear engaged up to
maximum engine speed.
When braking, the gearbox changes down
automatically to provide effective engine
braking.
When you take your foot off the accelerator
pedal quickly, the gearbox does not change up,
for your improved safety.Manual mode
This mode allows manual sequential gear
changing.
F
M
ove the gear lever to M .
F

P
ush the lever for ward to change
up.
F

P
ull the lever back to change down.
Invalid value
This symbol is displayed if a gear
is not properly engaged (selector
between two positions). When the engine is at idle, if position
R
,
D or M is selected with the brakes
released, the vehicle moves on its own
without pressing the accelerator.
Never leave children unsupervised
inside the vehicle when the engine is
running.
Apply the parking brake and select
position P if carrying out a maintenance
operation with the engine running.
Never select position N when the
vehicle is moving.
Never select positions P or R unless the
vehicle is at a complete stop.
You can change from D to M and M to D
at any time. If position N is engaged by mistake
when moving, take your foot off
the accelerator pedal, then engage
position


D to accelerate.
When the ambient temperature is below
-23°C, the engine should be left running
at idle for four minutes after starting,
to ensure the correct operation and
durability of the engine and gearbox.
6

Driving
132
208_en_Chap06_conduite_ed01-2016
For your comfort, during parking
manoeuvres, STOP mode is not
available for a few seconds after
coming out of reverse gear.
The Stop & Start system does not affect
the functionality of the vehicle, such as
for example, braking, ...
Never refuel with the engine in STOP
mode; you must switch off the ignition
with the key. A time counter calculates the sum
of the periods in STOP mode
during a journey. It rests itself
to zero every time the ignition is
switched on with the key.
Advice
S TA R T m o d e
Special casesAs a safety measure and for your comfort,
START mode is invoked automatically when:
-
y

ou open the driver's door,
-
y

ou unfasten the driver's seat belt,
-
s

ome special conditions (battery charge,
engine temperature, braking assistance,
ambient temperature...) where the engine is
needed for control of a system.
The "ECO" warning lamp flashes for
a few seconds, then goes off.
This operation is perfectly normal.
With a manual gearbox
:
-

C

lutch pedal depressed.
With an electronic / automatic gearbox :
-

G

ear lever in position A / D or M .
-
B

rake pedal released. The "ECO"
lamp goes off and the
engine restarts.
or
-

G

ear lever in position N .
-
B

rake pedal released.
-

T

hen gear lever in position A / D or M .
or
-
R

everse gear engaged.
With a manual gearbox in STOP mode,
if you engage a gear without fully
depressing the clutch pedal, a message
is displayed asking you to fully depress
the clutch pedal so that the engine can
restart.