width Peugeot 208 2017 Owner's Manual

130
In bad or wintry weather, ensure that the
sensors are not covered with mud, ice or
snow.
The system will be deactivated
automatically if a trailer is being towed or if
a bicycle carrier is fitted (vehicle fitted with
a towbar or bicycle carrier recommended
by PEUGEOT).
The parking sensor system cannot in
any circumstances replace the need for
vigilance on the part of the driver.Reversing camera
The reversing camera is activated automatically
when reverse gear is engaged.
The image is displayed on the touch screen.
The reversing camera function may be
supplemented with parking sensors.They are represented by lines marked "on
the ground" and do not allow the position of
the vehicle to be determined relative to tall
obstacles (for example: other vehicles, etc.).
Some deformation of the image is normal.
The blue lines represent the general direction
of the vehicle (the gap represents the width of
your vehicle except for the door mirrors).
The red lines represent a distance of about
30
cm beyond the edge of your vehicle's rear
b u m p e r.
The green lines represent distances of about 1
and 2 metres beyond the edge of your vehicle's
rear bumper.
The superimposed representation of guide
lines helps with the manoeuvre. The reversing camera cannot, in any
circumstances, replace the need for
vigilance on the part of the driver.
High pressure jet wash
When washing your vehicle, do not direct
the lance within 30
cm of the camera lens.
Opening the tailgate causes the display to
disappear.
Clean the reversing camera regularly
using a soft, dry cloth.
Driving

192
Commercial version
Number of seats: 2 people.
Effective boot volume: 1.062 m3
Effective floor length: 1.335 m.
E ffective width for wheel arches: 1.042 m.
Effective width in the centre: 1.061
m.
Effective height in the centre: 0.857
m.
Identification markings
Different visible markings for the identification
and localisation of your vehicle.
A.Vehicle Identification Number (VIN)
under the bonnet.
This number is engraved on the bodywork
near the suspension damper mounting.
B. Vehicle identification number (VIN), on
the dashboard.
This number is recorded on a label, visible
through the windscreen.
3-door 5-door
C.
Manufacturer's label.
This tamper proof label is affixed to the
front pillar, driver’s side.
Technical data