transmission Peugeot 508 RXH 2014 Owner's Manual

38
508RXH_en_Chap00c_systeme-hybride_ed01-2014
Recovery of the vehicle on a flat-bed
Before doing any work, with the ignition on, press the brake pedal and place the gear selector in
position N, then switch off the hybrid system ( Ready lamp off).
Always call on a professional for the recovery of your vehicle on a flat-bed lorry or trailer. Never recover the vehicle by towing it with the wheels on the ground (neither the front wheels, nor
the rear wheels), as there is a risk of damage to the transmission.
us

e the towing eyes only to lash the vehicle
when recovering it on a flat-bed lorry or trailer.
Hybrid system

218
508RXH_en_Chap08_info-pratiques_ed01-2014
Recovery of the vehicle on a flat-bed
Never recover the vehicle by towing it with the wheels on the ground (neither the front wheels, nor the rear wheels), as there is a risk of damage to the
transmission.
Before doing any work, with the ignition on, press the brake pedal and place the gear selector in position N, then switch off the hybrid system
( Ready


lamp off).
Always call on a professional for the recovery of your vehicle on a flat-bed lorry or trailer.
us

e the towing eyes only to lash the vehicle
when recovering it on a flat-bed lorry or trailer.
Practical information

281
05
508RXH_en_Chap11c_SMegplus-i_ed01-2014
Red and yellow triangle: traffic information, for example:
Modified signs
Risk of explosion Narrow carriageway
Road closed
Slippery surface
Demonstration Accident
Danger
Delay
No entry Roadworks
Traffic jam
Main traffic symbols
Black and blue triangle: general information, for example:
Weather reports Traffic reports
Wind Fog
Parking Snow / ice Receiving TA messages
TRAFFIC
Select "Settings". Press on Navigation to display the primary
page then go to the secondary page.
Select "Voice".
Activate / Deactivate "Traffic (TA)".
The TA (Traffic Announcement) function gives priority to TA alert
messages.
to operate, this function needs good reception of a
radio station transmitting this type of message. When a traffic report
is transmitted, the current audio source (Radio, CD,

u SB, ...) is
interrupted automatically to play the
tA

message. Normal playback
of the audio source resumes at the end of the transmission of
the
message.