warning lights Peugeot iOn 2018 Owner's Manual

69
Starting
F Check that the drive selector is in position P.
F I nsert the key in the ignition switch.
F

T
urn the key to position 4 (S TA R T ) .
F

H
old the key in that position
for a few seconds until the
" RE ADY " indicator lights up and
an audible signal sounds.
F

R
elease the key.
The switch will automatically return to
position 3 (ON) .
Switching off
F Immobilise the vehicle.
F
K eep your foot on the brake pedal.
F

P
lace the drive selector in position P .
F

A
pply the parking brake.
F

T
urn the key to position 1 (LOCK) .
F

R
emove the key from the ignition switch.
Avoid attaching heavy objects to the key,
which would weigh down on its blade
in the ignition switch and could cause a
malfunction.
Parking brake
Application
F Pull the parking brake lever fully up to immobilise your vehicle.
Release
F Pull the parking brake lever up gently, press the release button then lower the lever fully.
When the vehicle is moving, if the
brake remains applied or is not fully
released, this warning lamp comes on.
When parking on a slope, direct your
wheels against the kerb, apply the parking
brake, put the drive selector in position P
and switch off the ignition.
Drive selector
Selector positions
P. Park.
This position allows you to start the
vehicle.
To exit position P , you must have your
foot on the brake.
R. Reverse.
N. Neutral.
D. Drive (forward).
Displays in the instrument panel
When you move the drive selector in the gate
to select a position, the corresponding symbol
appears in the instrument panel.
6
Driving