fuel Peugeot RCZ 2014 User Guide

1/
MONITORING

TRIP COMPUTER, A FEW DEFINITIONS
Range
(miles or km)
The distance which can still be travelled with the fuel
remaining in the tank (related to the average fuel consumption over the\

last few miles (kilometres) travelled).
This value may vary following a change in the style of driving
or the relief, resulting in a signifi cant change in the current fuel
consumption.
If dashes are displayed continuously while driving in place of the
digits, contact a PEUGEOT dealer or a qualifi ed workshop.
This function is only displayed from 20 mph (30 km/h).
When the range falls below 20 miles (30 km), dashes are displayed.
After fi lling with at least 5 litres of fuel, the range is recalculated and is
displayed when it exceeds 60 miles (100 km).
Current fuel consumption
(mpg or l/100 km or km/l)
Calculated over the last few seconds.
Average fuel consumption
(mpg or l/100 km or km/l)
Calculated since the last trip computer reset.
Average speed
(mph or km/h)
Calculated since the last trip computer reset.
Distance travelled
(miles or km)
Calculated since the last trip computer reset.

1/
MONITORING
"SETUP" MENU
 Press the "SETUP" button to gain access to the confi guration
menu:
- "Display confi guration",
- "Voice synthesis",
- "Choice of language",
- "Vehicle parameters",
- "Alert log".
For safety reasons, confi guration of the multifunction screen by
the driver must only be done when stationary.
Display configuration
This menu allows you to choose a colour scheme for the screen, to
adjust the brightness, set the date and time and choose the units for
distance (km or miles), fuel consumption (l/100 km, mpg or km/l) and\

temperature (°Centigrade or °Fahrenheit).
Voice synthesis
This men allows you to adjust the volume for navigation instructions and\

to choose the type of voice (male or female).
* Depending on version.
** According to country of sale.
Choice of language
This menu allows you to choose the language used by the screen
(French, English, Italian, Portuguese, Spanish, German, Dutch, Turkish,
Polish, Russian).
Vehicle parameters *
This menu allows you to activate or deactivate certain driving and
comfort equipment, arranged by category:
- Access to the vehicle ● Selective unlocking of the driver's door; refer to "Access"),
- Parking sensors
- Operation of wipers
● Rear wiper linked to reverse (rear wiper operates in reverse gear; refer to "Visibility"),
- Lighting confi guration (see "Visibility"):
● Duration of the guide-me-home lighting,
● Directional headlamps (main/additional directional lighting),
● Mood lighting (Interior mood lighting),
● Daytime running lamps function ** .
Alert log
It lists the active alerts by displaying their associated messages in tu\
rn.
Setting the date and time
 Press " SETUP ".
 Select "Display confi guration" and confi rm.
 Select "Set date and time" and confi rm.
You can select " Synchronise the minutes with GPS ", so that the
minutes are adjusted automatically by satellite reception.  Select the setting to modify. Conform by pressing "
OK ", then adjust
the setting and modify again.
 Adjust the settings one by one.
 Select " OK " in the screen then confi rm to save the setting.

2/
ACCESS
REMOTE CONTROL KEY
System which permits central unlocking or locking of the vehicle using
the lock or from a distance. It is also used to locate and start the
vehicle, as well as providing protection against theft.
UNLOCKING THE VEHICLE
Unfolding the key
 First press this button to unfold the key.
Complete unlocking using the remote control
 Press the open padlock to unlock the vehicle.
Selective unlocking using the remote control
 Press the open padlock once to unlock the driver's door and the fuel fi ller fl ap only.
 Press the open padlock again to unlock the passenger's door and the boot.
Selective unlocking using the key
 Turn the key forwards in the driver's door lock once to unlock the driver's door and the fuel fi ller fl ap only.
 Turn the key forwards in the driver's door lock again to unlock the passenger's door and the boot.
The complete or selective unlocking parameter is set via
the vehicle confi guration menu.
Complete unlocking is activated by default.
Complete unlocking using the key
 Turn the key forwards in the driver's door lock to unlock the vehicle.
Unlocking and partial opening of the boot
 Press this button for more than two seconds to unlock the boot. The boot opens slightly.
This action also unlocks the doors and the fuel fi ller fl ap.
The direction indicators fl ash for a few seconds.
Depending on version, the door mirrors unfold, the alarm is deactivated.\

60
DOORS
OPENING
From outside
 After unlocking the vehicle completely using the remote control or the key, take hold of the door handle then pull it.
The window lowers automatically by a few millimetres to permit opening of the door.
In freezing conditions, the presence of ice may hinder the automatic
partial opening of the window; remove the ice which may have
formed along the lower seal, located at the base of the window.
When the selective unlocking is activated, the fi rst press of the
remote control unlocking button permits unlocking of the driver's
door only.
From inside
 Pull the door control to open the door; this unlocks this vehicle completely.
The window lowers automatically by a few millimetres to permit opening of the door.
With the selective unlocking activated:
- the driver's door control unlocks the driver's door and the fuel fi ller fl ap only.
- the passenger's door control unlocks the passenger's door and the boot.
The interior door controls do not operate when the vehicle is
deadlocked.
If you leave the door open for more than one minute, the window
rises again.
Pull the handle again to reactivate the system.

2/
ACCESS
CLOSING
The window rises automatically after a few seconds and adjusts to
provide perfect sealing when closed. - when the engine is running , this warning lamp comes on, accompanied by a message in the screen for a few seconds,
CENTRAL LOCKING CONTROL
This control permits simultaneous locking or unlocking of the doors,
boot lid and fuel fi ller fl ap from inside the vehicle.
Locking
 Press this button to lock the vehicle.
The red indicator lamp on the button comes on.
If one of the doors or the boot lid is open, the central locking from
the inside does not take place.
Unlocking
 Press this button again to unlock the vehicle.
The red indicator lamp on the button goes off.
Locking / deadlocking from the outside
When the vehicle is locked or deadlocked from the outside, the
red indicator lamp fl ashes and the button is inactive.
 With normal locking, pull on the interior door control lever to unlock the vehicle.
 With deadlocking, you have to use the remote control or the key to unlock the vehicle.
When washing your vehicle:
- fi rst lock the vehicle using the remote control or the key,
- avoid spraying the upper part of the windows,
- keep the end of the high pressure nozzle at least 1 metre from
the windows and door seals.
When a door is not closed correctly:
Be aware of the risk of pinching when the window rises
automatically on closing the door.
- when the vehicle is moving (speed higher than 6 mph (10 km/h)),
this warning lamp comes on, accompanied by an audible signal and
a message in the screen for a few seconds.

62
Pressing the central locking control unlocks the vehicle.
Opening a door from the inside, when stationary, also unlocks the
vehicle, but the vehicle will be locked again when the speed exceeds
6 mph (10 km/h).
Activation / Deactivation
You can activate or deactivate this function.
 With the ignition on, press the button for more than two seconds.
A confi rmation message appears in the screen.
EMERGENCY LOCKING
To lock or unlock the doors mechanically in the event of a central
locking system failure or fl at battery.
Locking the driver's door
 Insert the key in the lock, then turn it to the right.
Unlocking the driver's door
 Insert the key in the lock, then turn it to the left.
Locking the passenger door
 Using the key, remove the black cap on the edge of the door.
 Insert the key in the cavity without forcing, then without turning it, move the the latch sideways towards the interior of the door.
 Remove the key and refi t the cap.
Unlocking the passenger door
 Pull the interior door opening control.
ANTI-INTRUSION SECURITY
This function permits automatic and simultaneous locking of the doors,
boot lid and fuel fi ller fl ap as soon as the vehicle speed exceeds 6 mph
(10 km/h).
Operation
If one of the doors is open, the automatic central locking does not take\

place.
If the boot lid is open, the automatic central locking of the doors is
active.

2/
ACCESS
BOOT
OPENING
 Press this button for more than two seconds to unlock the boot lid. The boot lid opens slightly.
 Lift the boot lid.
This action also unlocks the doors and the fuel fi ller fl ap.
Using the manual control; vehicle unlocked
 Press the opening control above the number plate.
 Lift the boot lid.
CLOSING
 Lower the boot lid using one of the interior grab handles.
 If necessary, press the top of the boot lid to close it fully.
If the boot lid is not closed correctly: - when the engine is running , this warning lamp comes on, accompanied by a message in the screen for a few seconds,
When selective unlocking is activated, the boot can also be
opened by a second press on the open padlock on the remote
control.
Using the remote control
Emergency locking
If the central locking system fails (fl at battery), you are advised to
disconnect the battery. - when the vehicle is moving (speed above 6 mph (10 km/h)), this
warning lamp comes on, accompanied by an audible signal and a
message in the screen for a few seconds.
Never grasp the boot lid by the active spoiler.

3/
EASE OF USE and COMFORT
SWITCHING THE SYSTEM OFF
 Turn the air fl ow control to the left until all of the indicator lamps go off.
This action switches off the air conditioning and the ventilation.
Temperature related comfort is no longer guaranteed but a slight fl ow
of air, due to the movement of the vehicle, can still be felt.
 Turn the air fl ow dial to the right or press the "AUTO" button
to reactivate the system with the values set before it was
switched off.
Avoid prolonged operation in interior air recirculation mode or
driving for long periods with the system off (risk of condensation
and deterioration of the air quality).
8. Air intake / Air recirculation
 Press this button for recirculation of the interior air. The indicator lamp in the button comes on.
Air recirculation enables the passenger compartment to be isolated
from exterior odours and smoke.
 As soon as possible, press this button again to permit the intake of outside air and prevent the formation of condensation. The
indicator lamp on the button switches off.
9. Mono-zone / Dual-zone
 Press this button to equalise the comfort value on the passenger's side with that on the driver's side (mono
zone). The indicator lamp in the button comes on.
REAR SCREEN DEMIST -
DEFROST
SWITCHING ON
The rear screen demisting/defrosting can only operate when the engine
is running.
 Press this button to demist/defrost the rear screen and (depending on version) the door mirrors. The indicator lamp associated with
the button comes on.
SWITCHING OFF
The demisting/defrosting switches off automatically to prevent an
excessive consumption of current.
 It is possible to stop the demisting/defrosting operation before it is switched off automatically by pressing the button again. The
indicator lamp associated with the button switches off.
If the engine is switched off before the demisting/defrosting is
switched off automatically, demisting/defrosting will resume next
time the engine is switched on.
 Switch off the demisting/defrosting of the rear screen and door mirrors as soon as appropriate as lower current consumption
results in reduced fuel consumption. The control button is located on the heating or air conditioning
system control panel.

136
It is only possible to change from one gear to another if the vehicle
speed and engine speed permit; otherwise, the gearbox will operate
temporarily in automatic mode. M and the gears engaged manually appear in succession in
the instrument panel.
If the engine speed is too low or too high, the gear selected
fl ashes for a few seconds, then the actual gear engaged is
displayed.
It is possible to change from position D (automatic) to position M
(manual) at any time.
When the vehicle is stationary or moving very slowly, the gearbox
selects gear M1 automatically.
The sport and snow programmes do not operate in manual mode.
Invalid value during manual operation
This symbol is displayed if a gear is not engaged correctly
(selector between two positions).
STOPPING THE VEHICLE
Before switching off the engine, you can engage position P or N to
place the gearbox in neutral.
In both cases, apply the parking brake to immobilise the vehicle. If the lever is not in position
P , when the driver's door is opened or
approximately 45 seconds after the ignition is switched off, there is
an audible signal is heard accompanied by a message.
 Return the lever to position P ; the audible signal stops and the
message disappears.
OPERATING FAULT
When the ignition is on, the illumination of this warning lamp,
accompanied by an audible signal and a message in the
screen, indicates a gearbox malfunction.
In this case, the gearbox switches to emergency mode and is locked in
3rd gear. You may feel a substantial knock when changing from P to R
and from N to R . This will not cause any damage to the gearbox.
Do not exceed a speed of 60 mph (100 km/h), local speed restrictions
permitting.
Have it checked by a PEUGEOT dealer or a qualifi ed workshop.
This warning lamp may also come on if a door is opened.
There is a risk of damage to the gearbox:
- if you press the accelerator and brake pedals at the same time,
- if you force the lever from position P to another position when
the battery is fl at.
To reduce fuel consumption during a long period stationary with
the engine running (traffi c jam, etc.), place the gear lever in
position N and apply the parking brake.

6/
DRIVING
GEAR EFFICIENCY INDICATOR
System which reduces fuel consumption by recommending the most
appropriate gear.
OPERATION
Depending on the driving situation and your vehicle's equipment, the
system may advise you to skip one (or more) gear(s). You can follow
this instruction without engaging the intermediate gears.
The gear engagement recommendations must not be considered
compulsory. In fact, the confi guration of the road, the amount of traffi c
and safety remain determining factors when choosing the best gear.
Therefore, the driver remains responsible for deciding whether or not
to follow the advice given by the system.
This function cannot be deactivated. The system adapts its gear change recommendation according
to the driving conditions (slope, load, ...) and the demands of the
driver (power, acceleration, braking, ...).
The system never suggests:
- engaging fi rst gear,
- engaging reverse gear,
The information appears in the instrument panel in the form of an arrow. Example:
- You are in third gear.
- You press the accelerator pedal.
- The system may suggest that you engage a higher gear.
With an automatic gearbox, the system is only active in manual mode.
On vehicle fi tted with a manual gearbox, the arrow may be
accompanied by the gear recommended.