display Peugeot RCZ 2015 Repair Manual

04
220
RCZ_en_Chap10b_RT6-2-8_ed01-2015
Press N AV to display the
"Navigation - guidance " menu.
Navigation voice synthesis
Select "Guidance options " and confirm.
Adjusting the volume / d eactivation
Select "Set speech synthesis" and
confirm. Select
the volume graph and confirm.
Select " d eactivate
" to deactivate voice messages.
Select "OK" and press the dial to
confirm. Adjust the volume to the desired level
and confirm.
The volume of messages can be adjusted during the transmission
of the message using the volume adjustment control.
The volume setting of guidance messages is also accessible via
the "SETUP" / "
Voice synthesis" menu.
NAVIGATION - GUIdANCE

04
221
RCZ_en_Chap10b_RT6-2-8_ed01-2015
Male voice / Female voicePress SETUP to display the
configuration
menu.
Select "Select male voice" or "Select
female voice"
then confirm "Ye s" to
activate a male or female voice. The
system restarts. Select "Voice synthesis"
and confirm.
NAVIGATION - GUIdANCE

05
222
RCZ_en_Chap10b_RT6-2-8_ed01-2015
Access to the "TRAFFIC INFORMATION" menu
List of TMC messages in order
of distance from the vehicle.Go from the list to the menu (left/right).
"Traffic
information"
"Geographic filter
"
"Select TMC station"
(automatic, manual)
"
d isplay/ d o not display
messages "
or
Press "TRAFFIC".
TRAFFIC INFORMATION

05
223
RCZ_en_Chap10b_RT6-2-8_ed01-2015
Configure the filtering and display of TMC messages
TMC (Traffic Message Channel) messages with GPS Navigation provide traffic information in real time.
Press the TRAFFIC button to display the
"Traffic
information" menu.
Select the "Geographic
filter" function
and
confirm. The system offers a choice of:
-
"Retain all the messages",
or
-
"Retain the messages"
● "Around the vehicle ",
(confirm
the mileage to modify and select
the distance),
●

"On the route".
Confirm
"OK" to save the modifications.
We recommend:
- a
filter on the route and
- a
filter around the vehicle of:
-

12 miles (20 km) in urban areas,
-


30 miles (50 km) on motorways.
TRAFFIC INFORMATION

05
224
RCZ_en_Chap10b_RT6-2-8_ed01-2015
Principal TMC symbols
Red and yellow triangle: traffic information, for example:
Black and blue triangle: general information, for example:
W
eather reports
Modified signage
Risk of explosion Traffic
reports
Narrow carriageway
Road closed
Wind
Slippery surface
Demonstration Fog
Accident
Danger
Parking
Delay
No entry Snow / ice
Roadworks
Traffic
jam
Receiving TA messages
The TA (Traffic Announcement) function gives priority to T A alert messages.
To operate, this function needs good reception of a
radio
station transmitting this type of message. When a traffic report
is transmitted, the current audio source (Radio, CD, USB, ...) is
interrupted automatically to play the

TA message. Normal playback
of the audio source resumes at the end of the transmission of
the
message. Press RA
d IO to display the menu.
Select "Service announcements" then
confirm.
Activate or deactivate "TA "
then confirm.
The volume setting for TA messages can be adjusted only during the
transmission of this type of alert. Activate or deactivate the function at any time by pressing
the button.
During a message, press the button to interrupt it.
TRAFFIC INFORMATION

06
225
RCZ_en_Chap10b_RT6-2-8_ed01-2015
Access to the "TELEPHONE" menu
"Telephone"" d ial"
"
d irectory of contacts"
"Contacts management "
"Phone functions "
"Bluetooth functions "
"Hang up "
Go from the list to the menu (left/right). or
List of recent calls sent and
received with the telephone
connected to the system.
Press this button.
To

make

a

call,

select

a

number

in

the

list

and

confirm

" OK"
to start the call.
Connecting a different telephone deletes the list of
recent calls. No telephone connected.
Telephone connected.
Incoming call.
Outgoing call.
Synchronisation of
contacts in progress.
Telephone call in
progress.
In the top bar of the permanent
display
USING THE TELEPHONE

06
226
RCZ_en_Chap10b_RT6-2-8_ed01-2015
USING THE TELEPHONE
Pairing a Bluetooth® telephone
First connectionFor reasons of safety and because they require prolonged attention on the part of the driver , the operations for pairing the Bluetooth
mobile telephone to the hands-free system of the audio unit must be
carried out with the vehicle stationary.
In the Bluetooth menu of your telephone, select the
name "PEUGEOT" from the list of devices detected. Press this button.
Select "Bluetooth functions" and
confirm.
Select "Peripherals search " and
confirm.
The list of peripheral devices detected
is displayed. Wait until the "Connect"
button is available.
You can check the compatibility of your telephone at
www.peugeot.co.uk (services).
Activate the telephone's Bluetooth function
and ensure that it is "visible to all" (telephone
configuration).
Quick procedure from the telephone
Enter

a

minimum

4

figure

code

in

the

telephone

and

confirm. Enter the same code in the system,
select "

OK"

and

confirm. Procedure from the system

06
228
RCZ_en_Chap10b_RT6-2-8_ed01-2015
USING THE TELEPHONE
directory configuration / Synchronisation with the telephone
Press PHONE then select "Contacts
management" and confirm.
Select "New contact" to enter a new
contact.
Select "Sort by Name/First name" or
"Sort by First name/Name" to choose
the order in which they appear.
Select "
d elete all contacts" to delete
the contacts saved in the system. Select "Synchronization options
":
-

No synchronization: only the
contacts saved in the system
(always present).
-


Display telephone contacts: only the
contacts saved in the telephone.
-


Display SIM card contacts: only the
contacts saved on the SIM card.
-


Display all phone contacts:
contacts on the SIM card and in the
telephone.
Select "

Import all the entries" to import
all the contacts in the telephone and
save them in the system.
Once imported, a contact remains visible
whatever telephone is connected.
Select "Contact mem. status" to see the
number of contacts saved in the system
or imported, and the free memory.

06
231
RCZ_en_Chap10b_RT6-2-8_ed01-2015
USING THE TELEPHONE
Calling a recently entered numberPress TEL, select "Call list" and
confirm,
Select
the desired number and confirm.
To erase the calls log, press PHONE twice, select "Phone
functions"
and confirm then select " d elete calls log" and confirm.
Ending a call
Press PHONE then select "OK" to end
the call.
Or make a long press on TEL at the
steering mounted controls.
Or make two short presses on TEL at
the steering mounted controls.
Or press the MOd E button, as many
times as necessary, until the telephone
screen is displayed.
Press PHONE to display the calls log. or
Press "OK" to display the contextual
menu then select "Hang up"

and

confirm.
It is always possible to start a call directly from the telephone; park \
the vehicle as a safety measure.

06
232
RCZ_en_Chap10b_RT6-2-8_ed01-2015
USING THE TELEPHONE
Receiving a call
An incoming call is announced by a ring and a superimposed display
on the screen."Ye s" to accept the call is selected by
default.
Press "OK" to accept the call.
Select "No"
and confirm to reject the
call.
A

short press on TEL accepts an
incoming call.
A long press on TEL rejects an incoming
call.