display Peugeot RCZ 2015 Manual PDF

06
233
RCZ_en_Chap10b_RT6-2-8_ed01-2015
Options during a call*
During a call, press the MO d E button
several times to select display of the
telephone screen, then press " OK" to
open the contextual menu.
Select "Private mode"
and confirm to
take the call on the handset.
Or select "

Hands-free mode" and
confirm
to take the call via the vehicle's
speakers.
Select "

Put call on hold "
and confirm to
put the current call on hold.
Or select "

Resume the call" and
confirm
to resume the call on hold. Select "
d TMF ring tones
" to use the
numerical keypad, so as to navigate
through the menu of an interactive vocal
server.
Select "Hang up" to end the call.
* Depending on the compatibility of the phone and your service plan. It is possible to hold a 3-way conference
call by making 2 calls in succession*.
Select "Conference mode call" in
the contextual menu accessible using
this
button.
Or make a short press on this button.
USING THE TELEPHONE

07
236
RCZ_en_Chap10b_RT6-2-8_ed01-2015
By alphabetical list
Press RAd IO, select the station of your
choice
and confirm.
By automatic frequency search
Press 7 or 8 for the automatic search
for
a lower or higher radio frequency.
Or turn the thumb wheel at the steering
mounted controls.
By manual frequency search
Press 5 or 6 to adjust the radio
frequency
step by step.
Selecting a station
The external environment (hill, building, tunnel, underground car park.\
..) may interfere with the reception, including in RDS station tracking mode.
This phenomenon is a normal result of the way in which radio waves are transm\
itted and does not in any way indicate a fault with the audio system.
The
quality of reception is represented by the number of
active waves in this symbol.
Press

RA d IO or OK to display the
contextual menu.
Changing waveband
Select "Change waveband".
Select "FM /
d AB / AM" and confirm.
RAdIO

07
238
RCZ_en_Chap10b_RT6-2-8_ed01-2015
RAdIO
Display of options:
if active but not available, the display
will be greyed out,
if active and available, the display will
be empty.Display the name and number of
the multiplex service being used. Preset stations, buttons 1 to 6.
Short press: select the preset radio
station.
Long press: preset a radio station.
Display of "Radiotext" for the
current station.
Display of the "DAB" or "DAB
(FM)" band.
Display of the name of
the current station.
Represents the signal strength
for the band being listened to.
If the "DAB" radio station being
listened to is not available on
"FM", the "DAB FM" option is
greyed out. Any thumbnail broadcast by the
station.
The "Video mode" allows the
display to be enlarged.

07
239
RCZ_en_Chap10b_RT6-2-8_ed01-2015
RAdIO
Press "RAdIO".
dAB (digital Audio Broadcasting)
d
igital radio
Digital radio provides a higher quality reception and also the graphical display of information for the radio station, by selecting
"V
ideo mode" in "Radio favourites" (Options).
The different radio multiplex services offer a choice of stations
displayed in alphabetical order.
Select "Change band"
and confirm.
Selection "
d

AB" and confirm.
digital radio - dAB/FM auto tracking
"DAB" does not have 100% coverage of the country.
When the digital signal is weak, "DAB / FM auto tracking" allows you
to continue listening to the same station, by automatically switching
to the corresponding analogue "FM" station (if one exists).
Change of station in the same "multiplex".
Manual search for a "multiplex". Press "RA
d IO".
Select "Options "
and confirm.
Select "FM/
d AB" and confirm.
If "DAB
/ FM auto tracking" is on, there will be a difference of a few
seconds in the programme when the system changes to analogue
"FM" radio with sometimes a variation in volume.
Display of the "DAB" band then becomes "DAB (FM)".
When the strength of the digital signal is good again, the system
automatically switches back to "DAB".
If the "DAB" station you are listening to is not available on "FM"
("
d AB/FM" option greyed out), or if "DAB / FM auto tracking" is not
on, the sound will be cut when the digital signal is too weak.

08
242
RCZ_en_Chap10b_RT6-2-8_ed01-2015
Insert the CD in the player, insert the USB
memory stick in the USB player or connect the
USB peripheral to the USB port using a suitable
cable (not supplied).
The system builds playlists (in temporary
memory), an operation which can take from
a few seconds to several minutes at the first
connection.
Reduce

the number of non-music files and the
number of folders to reduce the waiting time.
The playlists are updated every time the ignition
is switched of

f or connection of a USB memory
stick. However, the system memorises these
lists
and if they are not modified, the loading
time will be shorter

.
Play starts automatically after a period which
depends on the capacity of the USB memory
stick. Selection of source
The SOURCE button on the steering mounted controls allows a
direct change to the next media source. "C d / C d MP3"
"USB, iPod "
"AUX"
"STREAMING"
"RA
d IO"
Press MUSIC to display the "ME
d IA"
menu.
Select "Following media source " and
confirm.
Repeat the operation as many times as necessary to obtain the
desired media source (except for radio which is accessible either
with SOURCE or RA
d IO).
Sources
MUSIC MEdIA
PLAYERS

08
245
RCZ_en_Chap10b_RT6-2-8_ed01-2015
MUSIC MEdIA PLAYERS
Using the auxiliary input (AUX)
j

ACK/USB audio cable not supplied
Connect the portable device (MP3, WMA player…)
to the j ACK auxiliary audio socket or USB port
using a suitable cable.
Press MUSIC to display the "MUSIC"
menu. Select "Activate /
d eactivate AUX
input " and confirm.
First adjust the volume of your portable
device (to a high level). Then adjust the
volume of your audio system.
Display and management of the controls are via the portable device.

10
247
RCZ_en_Chap10b_RT6-2-8_ed01-2015
CONFIGURATION
Press SETUP to display the
"Configuration" menu. Select "Choose colour"
and confirm to
select the screen colour harmony and
the map presentation mode:
-

day mode,
- night mode,
-

automatic day/night mode,
according to whether the
headlamps are on.
Select "

Adjust luminosity"
and confirm
to adjust the screen brightness.
Press "

OK" to save the changes.
The settings for day and night are
independent.
Select "Display
configuration" and
confirm.
display configuration

11
249
RCZ_en_Chap10b_RT6-2-8_ed01-2015
Select TMC station
Automatic TMC
Manual TMC
List of TMC stations
display / do not display
messages
"TRAFFIC INFORMATION"
MENU
Geographic filter
Retain all the messages
Retain the messages
Around the vehicle
On the route
1
2
2
2
1
2
2
3
3
1
SCREEN MENU MAP(S)
dial
d
irectory of contacts
Call
Open
Import
"TELEPHONE" MENU
1
2
2
2
1
2
2
2
2
2
1
2
3
3
3
2
2
2
1
1
1
3
3
3
2
3
2
2
3
List of the paired peripherals
Connect
Disconnect
Delete
Delete all
Phone functions
Ring options Contact mem. status
d

elete calls log
Bluetooth functions
Peripherals search
Rename radiotelephone
Hang up
Display all phone contacts
d

elete
Search
Contacts management
New contact
d

elete all contacts
Import all the entries
Synchronization options
Display telephone contactsNo synchronization
Display SIM card contacts
2Cancel
2Sort by First name/Name
3Cancel

253
RCZ_en_Chap10b_RT6-2-8_ed01-2015
FREQUENTLY ASKE d QUESTIONS
QUESTION ANSWER SOLUTION
Certain traffic jams
along the route are not
indicated in real time. On starting, it is several minutes before the system begins to receive t\
he
traffic

information. Wait
until the traffic information is being received
correctly

(display of the traffic information icons on
the map).
The

filters are too restrictive. Modify
the "Geographic filter" settings.
In certain countries, only major routes (motorways...) are listed for \
the
traffic
information. This phenomenon is normal. The system is
dependent
on the traffic information available.
The altitude is not
displayed. On starting, the initialisation of the GPS may take up to 3 minutes to
receive more than 4 satellites correctly. Wait until the system has started up completely.
Check that there is a GPS coverage of at least
4
satellites (long press on the SETUP button, then
select "GPS coverage").
Depending on the geographical environment (tunnel...) or the weather,
the conditions of reception of the GPS signal may vary. This phenomenon is normal. The system
is dependent on the GPS signal reception
conditions.
I am unable to connect
my Bluetooth telephone. The telephone's Bluetooth function may be switched off or the telephone
may not be visible. -

Check that your telephone's Bluetooth
function is switched on.
-


Check in the telephone settings that it is
"visible to all".
The Bluetooth telephone is not compatible with the system. Y

ou can check the compatibility of your telephone
on www.peugeot.co.uk (services).
The volume of the
telephone connected
in Bluetooth mode is
inaudible. The volume depends both on the system and on the telephone.
Increase the volume of the audio system, to
maximum
if required, and increase the volume of
the telephone if necessary

.
The
ambient noise level has an influence on the quality of telephone
communication.Reduce the ambient noise level (close the windows,


reduce the booster fan speed, slow down, ...).

254
RCZ_en_Chap10b_RT6-2-8_ed01-2015
FREQUENTLY ASKE d QUESTIONS
QUESTION ANSWER SOLUTION
Some contacts are
duplicated in the list. The options for synchronizing contacts are synchronizing the contacts
on the SIM card, the contacts on the telephone, or both. When both
synchronizations are selected, some contacts may be duplicated. Select "Display SIM card contacts" or "Display
telephone contacts".
Contacts are not shown
in alphabetical order. Some telephones offer display options. Depending on the settings
chosen,
contacts can be transferred in a specific order.Modify the display setting in the telephone
directory.
The system does not receive
SMS text messages.The Bluetooth mode does not permit sending SMS text messages to the
system.
The CD is ejected
automatically or is not
played by the player. The CD is inserted upside down, is unplayable, does not contain any
audio data or contains an audio format which the player cannot play.
-

Check that the CD is inserted in the player the
right way up.
-


Check the condition of the CD: the CD cannot
be played if it is too damaged.
-


Check the content in the case of a recorded
CD: refer to the information and advice in the
"MUSIC MEDIA

PLAYERS" section.
-

The audio system's CD player does not play DVDs.
- Some recorded CDs will not be played by
the audio system because they are not of the
correct quality.
The CD has been recorded in a format that is not compatible with the
player (udf,

...).
The CD is protected by an anti-pirating protection system which is not
recognised by the audio system.
There is a long waiting
period following the insertion
of a CD or connection of a
USB memory stick.When a new medium is inserted, the system reads a certain amount of
data (directory, title, artist, etc.). This may take from a few seconds to a
few minutes. This phenomenon is normal.
The CD player sound is
poor. The
CD used is scratched or of poor quality. Insert
good quality CDs and store them in suitable
conditions.
The

audio equipment settings (bass, treble, ambiences) are unsuitable.Set the treble or bass level to 0, without selecting
an ambience.