display Peugeot RCZ 2015 Manual Online

255
RCZ_en_Chap10b_RT6-2-8_ed01-2015
FREQUENTLY ASKE d QUESTIONS
QUESTION ANSWER SOLUTION
Some characters in the
media information are not
displayed correctly while
playing. The audio system does not read some types of characters.
Use standard characters to name tracks and
folders.
Playing
of streaming files
does not start. The peripheral device connected does not support automatic play

. Start the playback from the device.
The names of tracks and
the track length are not
displayed on the screen
when streaming audio. The
Bluetooth profile does not allow the transfer of this information.
The

quality of reception
of the radio station
listened to gradually
deteriorates or the stored
stations do not function
(no sound, 87.5

Mhz is
displayed...). The vehicle is too far from the transmitter used by the station listened\

to or there is no transmitter in the geographical area through which the\

vehicle is travelling.
Activate the "RDS" function by means of the
short-cut menu to enable the system to check
whether there is a more powerful transmitter in the
geographical area.
The environment (hills, buildings, tunnels, basement car parks...) blo\
ck
reception, including in RDS mode. This phenomenon is normal and does not indicate
a fault with the audio system.
The aerial is absent or has been damaged (for example when going
through an automatic car wash or in an underground car park). Have the aerial checked by a PEUGEOT dealer.
I

cannot find some radio
stations in the list of
stations received. The station is not received or its name has changed in the list.
Some radio stations send other information in place of their name (the \
title of the song for example).
The system interprets this information as the name of the station.
The name of the radio
station changes.

01
260
RCZ_en_Chap10c_RD45_ed01_2015
FIRST STEPS
Eject CD.Select source:
radio, audio CD / MP3 CD, USB,
j

ack connection, Streaming,
AU x .
Select the screen display
mode:
Date, audio functions, trip
computer, telephone. Automatic
frequency search
down/up.
Select previous/next CD, MP3
or USB track.
Audio settings: front/
rear fader

, left/right
balance, bass/treble,
loudness, audio
ambiences. Display the list of
local stations.
Long press: CD
tracks or MP3
folders (CD / USB).
TA

(Traffic
Announcements)

on/of

f.
Long press: PTY* (radio
Programme TYpe) mode.
Display main menu.
The DARK button changes the screen display
for improved driving comfort at night.
1
st press: upper bar only illuminated.
2nd press: black screen.
3rd press: return to standard display.
On/off, volume setting.
Buttons 1 to 6:
Select a pre-set radio station.
Long press: pre-set a station. Select next frequency down/up.
Select previous/next MP3 folder.
Select previous/next folder / genre /
artist / playlist (USB). Confirm.
Selection of FM / DAB /
AM* wavebands.
* Depending on model.
Abandon the current
operation.
*
Available according to version.

03
262
RCZ_en_Chap10c_RD45_ed01_2015
MAIN MENU
AUdIO FUNCTIONS:
radio, CD, USB, options.
Screen C
For a detailed global view of the
menus available, refer to "Screen
menu map" in this section.
TELEPHONE:
hands-free kit, pairing,
management of a call.
PERSONALISATION-
CONFIGURATION:
vehicle parameters,
display, languages.
VEHICLE
d
IAGNOSTICS:
alert log.

04
263
RCZ_en_Chap10c_RD45_ed01_2015
AUdIO
Press the SOURCE button several
times in succession and select the
radio.
Press the BAND AST button to select
a waveband: FM1, FM2, FMast, AM.
Briefly press one of the buttons to
carry out an automatic search of the
radio stations.
Press one of the buttons to carry out
a manual search up / down for radio
frequencies.
Press the LIST

REFRESH button to
display the list of stations received
locally (30 stations maximum).
To update this list, press for more
than two seconds.
The external environment (hills, buildings, tunnels, basement car parks\
, ...) may
block reception, including in RDS mode. This is a normal effect of the way in which
radio waves are transmitted and does not indicate any failure of the aud\
io system.
RdS
RadioSelecting a station
Press the MENU button.
Select AUDIO FUNCTIONS then
press OK.
Select the FM WAVEBAND
PREFERENCES function then
press
OK.
Select ACTIVATE RDS then
press
OK. RDS appears on the
screen.
In radio mode, press OK directly to activate / deactivate RDS
mode.
The RDS, if displayed, enables you to continue listening to the same
station by automatic retuning to alternative frequencies. However, in certain conditions, coverage of an RDS station may not be assured throughout the\


country as radio stations do not cover 100 % of the territory. Under conditions
of very weak reception, the system may change to a regional station.

04
264
RCZ_en_Chap10c_RD45_ed01_2015
AUdIO
Receiving TA messages
Press the TA button to activate or
deactivate traffic messages.
The

T

A


(Traffic
Announcement)
function gives priority to
T
A

alert
messages.

To operate, this function needs good reception of a
radio

station
transmitting this type of message. When a traffic
report is transmitted, the current audio source (Radio, CD, ...) is
interrupted automatically to play the

TA message. Normal playback
of the audio source resumes at the end of the transmission of the
message.
Change band (FM1, FM2, DAB, ...).
dAB (digital Audio Broadcasting)
d
igital radio
Digital radio provides a superior audio quality and also additional categories of traffic announcements (TA INFO).
The different "multiplex services" offer a choice of radio stations in
alphabetical order.
Change of station within the same "multiplex service".
Start a search for the next "multiplex service".
Long press: select the desired categories of
announcements from Transport, News, Entertainment
and Flash special (availability according to the station).
When the radio station is displayed in the screen, press on " OK" to
display the contextual menu.
(Frequency
hopping (RDS), DAB / FM auto tracking, RadioText
(T

x T) display, Information on the station, ...)

04
265
RCZ_en_Chap10c_RD45_ed01_2015
Insert circular compact discs only.
Some anti-pirating systems, on original discs or CDs copied using a
personal recorder, may cause faults which are no reflection on the
quality

of the vehicle's player.
Without pressing the E
j ECT button, insert a CD in the player, play
begins automatically.
Cd
Playing

a C d
To play a disc which has already been
inserted, press the SOURCE button
several times in succession and
select CD.
Press one of the buttons to select a
track on the CD.
Press the LIST REFRESH button to display the list of tracks
on the CD. Press and hold one of the buttons for
fast forwards or fast backwards.
AUdIO
digital radio - dAB / FM tracking
"DAB" does not have 100% coverage of the country.
When the digital signal is weak, "DAB / FM auto tracking" allows you
to continue listening to the same station, by automatically switching
to the corresponding analogue "FM" station (if it exists).Press the "Menu" button.
Select "Multimedia"
and confirm.
Select "
d AB / FM auto tracking" and confirm
If "DAB / FM auto tracking" is on, there will be a difference of a few
seconds in the programme when the system changes to analogue
"FM" radio, with sometimes a variation in volume.
When the strength of the digital signal is good again, the system
automatically switches back to "DAB"
If the "DAB" station you are listening to is not available on "FM"
("
d AB/FM" option barred), or if "DAB / FM auto tracking" is not on,
the sound will be cut when the digital signal is too weak.

04
266
RCZ_en_Chap10c_RD45_ed01_2015
The MP3 format, an abbreviation of MPEG 1.2 & 2.5 Audio Layer 3,
is an audio compression standard which permits the recording of
several
tens of music files on a single disc.
In order to be able to play a recorded CDR or CDRW, when
recording,
the ISO 9660 level 1.2 or Joliet file format is
recommended.
If the disc is recorded in another format, it may not be played
correctly

.
It is recommended that the same recording format is always used
for an individual disc, with as low a speed as possible
(4x
maximum) for optimum sound quality.
In the particular case of a multi-session CD, the
j oliet format is
recommended.
The
audio system will only play files with the extension ".mp3" with
a

sampling rate of 22.05 KHz or 44.1 KHz. No other type of file
(.wma, .mp4, .m3u...) can be played.
It

is advisable to restrict file names to 20 characters without using
special characters (e.g. " ?

; ù) to avoid any playing or displaying
problems.
MP3 Cd
Information
and advice
AUdIO
Empty CDs are not recognised and may damage the system.
Insert an MP3 compilation in the player.
The

audio

equipment

searches

for

all

of

the

music

tracks,

which

may take anything between a few seconds and several tens of
seconds, before play begins.
MP3 Cd
Playing

an MP3 compilation
On a single disc, the CD player can read up to 255 MP3 files spread over 8 folder levels. However , it is advisable to keep to
a limit of two levels to reduce the access time before the CD is
played.
While the CD is being played, the folder structure is not followed.
All
of the files are displayed on a single level.
To play a disc which has already
been inserted, press the SOURCE
button several times in succession
and select CD.
Press one of the buttons to select a
folder on the CD.
Press the LIST REFRESH button to display the list of directories of
the MP3 compilation. Press and hold one of the buttons for
fast forward or backward play. Press one of the buttons to select a
track on the CD.

05
268
RCZ_en_Chap10c_RD45_ed01_2015
Using the PEUGEOT CONNECT USB
Press LIST briefly to display the previously
selected classification.
Navigate through the list using the left/
right and up/down buttons.
Confirm
the selection by pressing OK. The
lists available are
Artist,
Genre and Playlist (as defined in the
Apple® player).
Selection and Navigation are described in steps 1 to 4 above.
Do not connect a hard disk or USB connection device other
than

audio equipment to the USB port.
This
could damage your
installation. Connecting
an Apple
® player via the USB port
Press one of these buttons to gain
access to the previous / next track on
the

classification list currently being
played.
Press and hold one of the buttons for
fast forward or backward play

.
Press one of these buttons to
gain access to the previous / next
Genre, Folder, Artist or Playlist on
the

classification list currently being
played.
Press and hold LIST

to display the
different

classifications.
Select by Folder / Artist / Genre / Playlist,
press

OK

to

select

the

classification

required,


then

press

OK

again

to

confirm.
-

by Folder: all folders containing audio
files


recognised

on

the

peripheral

device.
-


by

Artist: all of the artist names
defined

in

the

ID3

T

ags,

classified

in

alphabetical order

.
- by

Genre:

all

of

the

genres

defined

in
the
ID3 Tags.
-

by Playlist: in accordance with the
playlists recorded on the USB device.
PEUGEOT CONNECT USB

05
269
RCZ_en_Chap10c_RD45_ed01_2015
The display and control is via the portable device.
First adjust the volume of your portable device.
Then adjust the volume of your audio
system.
Using the auxiliary input (AUX)Adjusting the volume of the auxiliary sourcejACK socket or USB port (according to vehicle)
PEUGEOT CONNECT USB
Do not connect a device to both the jACK socket and the USB
port at the same time.
Connect the portable device (MP3 player…)
to the
j ACK socket or to the USB port,
using a suitable cable (not supplied).
Press the SOURCE button several
times in succession and select AU
x .
The auxiliary input,
j ACK or USB, allows the connection of a
portable device (MP3 player...).

06
270
RCZ_en_Chap10c_RD45_ed01_2015
BLUETOOTH
For safety reasons and because they require prolonged attention on the part of the driver, the operations for pairing of the Bluetooth
mobile telephone with the Bluetooth hands-free system of your
audio
equipment must be carried out with the vehicle stationary
and the ignition on.
Press the MENU button.
A

window is displayed with a message that a search is in progress.
Activate the telephone's Bluetooth function
and ensure that it is "visible to all" (telephone
configuration).
In the menu, select:
-

Bluetooth telephone function -
Audio
-

Bluetooth configuration
-

Perform a Bluetooth search The services of

fered depend on the network, the SIM card and the
compatibility of the Bluetooth equipment used.
Consult your telephone's manual and your operator to find out which
services are available to you.
Bluetooth telephoneScreen C
The TELEPHONE menu permits access to the following functions
in particular: Directory*, Call list, Pairing management. The first 4 telephones recognised are displayed in this window.
A virtual keypad is displayed in the
screen: enter a code with at least 4 digits.
Confirm
by pressing OK.
A message that the pairing has been successful appears in the
screen. Select the telephone to be connected from the list. Only one
telephone can be connected at a time.
A message is displayed in the screen of the
telephone chosen. To accept the pairing, enter the
same
code on the telephone, then confirm with OK.
The automatic connection authorised is only active after the
telephone
has been configured.
The directory and the call list can be accessed after the
synchronisation period.
(Available according to model and version)
* If your telephone is fully compatible.
If pairing fails, the number of attempts is not limited.
Go to www.peugeot.co.uk for more information (compatibility,
more help, ...).
Pairing a telephone / First connection