display Peugeot RCZ 2015 Owner's Guide

35
RCZ_en_Chap01_controle-de-marche_ed01-2015
"SETUP" MENU
F Press the "SETUP" button to gain access to the configuration menu:
- "Display configuration",
-

"V
oice synthesis",
-

"Choice of language",
-


"V
ehicle parameters",
-

"Alert log".
As

a safety measure, configuration of the multifunction screen by
the driver must only be done when stationary

.
display configuration
This menu allows you to choose a colour scheme for the screen, to
adjust the brightness, set the date and time and choose the units for
distance (km or miles), fuel consumption (l/100 km, mpg or km/l) and\

temperature (°Centigrade or °Fahrenheit).
Voice synthesis
This men allows you to adjust the volume for navigation instructions and\

to choose the type of voice (male or female).
* Depending on version.
** According to country of sale.
Choice of language
This menu allows you to choose the language used by the screen
(French, English, Italian, Portuguese, Spanish, German, Dutch, Turkish,
Polish, Russian).
Vehicle parameters*
This menu allows you to activate or deactivate certain driving and
comfort equipment, arranged by category:
-

Access to the vehicle
●

Plip action (selective unlocking of the driver's door; refer to the
"Access" section),
-


Parking sensors
-

Lighting configuration (see the "Visibility" section) :
● Duration
of the guide-me-home lighting,
● Directional
headlamps (main/additional directional lighting),
● Mood
lighting (Interior mood lighting),
● Daytime
running lamps**.
Alert log
It lists the active alerts by displaying their associated messages in tu\
rn.
Setting the date and time
F
Press "
SETUP".
F Select

"Display

configuration"

and

confirm.
F Select

"Set

date

and

time"

and

confirm.
You can select "Synchronise the minutes with GPS ", so that the
minutes are adjusted automatically by satellite reception. F Select
the setting to modify. Confirm by pressing "
OK", then adjust
the setting and modify again.
F
Adjust the settings one by one.
F

Select "
OK" in the screen then confirm to save the setting.
1/
MONITORING

36
RCZ_en_Chap01_controle-de-marche_ed01-2015
You can adjust the angle of the screen to one of four defined positions, by repeated presses on the front or back of the control B
. The position
of the screen is memorised on closing.
Adjusting the angle of the screen
The screen opens automatically when the ignition is switched on. It
closes automatically three seconds after switching off the ignition if the
audio and telematics system is switched off.
ACCESS TO THE RETRACTABLE SCREEN
You can open or close the screen at any time, with the ignition on, using\

control A.
-

Press button
A: the screen folds.
-

Press button
A again: the screen opens again.
If you have closed the screen, it will open again automatically:
-

on switching on the audio and navigation system (unless it
had been closed manually while the system was in operation),
-


when an outgoing telephone call is made,
-


when a voice command is given,
-


when a warning message linked with the ST
OP warning lamp
is displayed (P
EUGEOT
Connect Navigation (R
T6)).

AUTO
61
RCZ_en_Chap03_confort_ed01-2015
DUAL-ZONE DIGIT AL AIR
CONDITIONING
The air conditioning only operates when the engine is running.
AUTOMATIC OPERATION
1. Automatic comfort programme
F Press the "AUTO" button. The indicator lamp in the
button comes on.
We recommend the use of this mode: it permits automatic and
optimised adjustment of all of the functions, passenger compartment
temperature,
air flow, air distribution and air recirculation, in accordance
with the comfort value that you have chosen.
This system is designed to operate ef

fectively in all seasons, with the
windows closed.
2. driver's side adjustment
When the engine is cold, to prevent too great a distribution of cold
air, the air flow will reach its optimum level gradually.
In cold weather, it favours the distribution of warm air to the
windscreen, side windows and footwells only.
3. Passenger's side adjustment
The driver and front passenger can each adjust the
temperature to their requirements.
The value indicated on the display corresponds to a level
of comfort and not to a temperature in degrees Celsius or
Fahrenheit.
F

T

urn control 2 or 3 to the left or to the right respectively to decrease
or increase this value.
A setting around the value 21 provides optimum comfort. However,
depending

on your requirements, a setting between 18 and 24 is
normal.
Y

ou are advised to avoid a left / right setting difference of more than 3. On entering the vehicle, if the interior temperature is much colder
or warmer than the comfort value, there is no need to change
the

value displayed in order to obtain the comfort required.
The

system corrects the dif

ference in temperature automatically and
as

quickly as possible.
3/
EASE OF USE and COMFORT

62
RCZ_en_Chap03_confort_ed01-2015
4. Automatic visibility programme
The automatic comfort programme may not be sufficient to quickly demist or defrost the windscreen and side windows
(humidity

, several passengers, ice, etc.).
MANUAL OPERATION
If you wish, you can make a different choice from that offered by the
system by changing a setting. The other functions will still be controlled
automatically.
F

Pressing the
"AUTO" button returns the system to completely
automatic operation.
For maximum cooling or heating of the passenger compartment,
it is possible to exceed the minimum value 14 or the maximum
value 28.
F

T
urn control 2 or 3 to the left until "LO" is displayed or to the
right until "HI" is displayed.
5. Air conditioning On / Off
F Press this button to switch of f the air conditioning.
Switching the system off could result in discomfort (humidity,
condensation).
F

Press this button again to return to automatic operation of the air
conditioning.

The indicator lamp in the "A/C" button comes on.
6. Air distribution adjustment
F Press one or more buttons to direct the air flow towards:
-

the windscreen and side windows (demisting or defrosting),
-


the windscreen, the side windows and the vents,
-


the windscreen, the side windows, the vents and the footwells,
-


the vents and the footwells,
-


the vents,
-


the footwells,
-


the windscreen, the side windows and the footwells.
7. Air flow adjustment
F Turn this control to the left to decrease the air flow or to the right to increase the air flow.
The

air

flow indicator lamps, between the two fans, come on
progressively

in relation to the value requested.
F

Press this button to activate the automatic visibility programme.

The
indicator lamp in the button comes on.
The

system

automatically

controls

the

air

conditioning,

the

air

flow

and

the air intake and provides optimum distribution of the ventilation to t\
he
windscreen and side windows.
F


T

o switch the system off, press this button again or press "AUTO".
The indicator lamp in the button goes off and the indicator lamp in
the "AUTO" button comes on.

69
RCZ_en_Chap03_confort_ed01-2015
12 V ACCESSORY SOCKET
F To connect a 12 V accessory (max power: 120 W), lift the cover and
connect a suitable adaptor.
ILLUMINATEd ASHTRA Y
F Pull the drawer for access to the ashtray .
F
T
o empty the ashtray, after opening, press the tab and remove
the
ashtray.
The connection of an electrical device not approved by
PEUGEOT, such as a USB charger, may adversely affect the
operation of vehicle electrical systems, causing faults such
as poor telephone reception or interference with displays in
the

screens.
3/
EASE OF USE and COMFORT

71
RCZ_en_Chap03_confort_ed01-2015
USB PLAYER
This connection box, consisting of a USB port, is located in the front
armrest.
It permits the connection of a portable device, such as an iPod
® digital
audio player of generation 5 or later or a USB memory stick.
It

reads

the

audio

file

formats

(mp3,

ogg,

wma,

wav...)

which

are
transmitted


to

your

audio

equipment

and

heard

via

the

vehicle's
speakers.
Y

ou

can

manage

these

files

using

the

steering

mounted

controls or the
audio

system control panel and display them in the multifunction screen.
When it is in use, the portable device charges automatically.
For

more

information

on

the

use

of

this

equipment,

refer

to

the
corresponding


audio

part

of

the

"Audio

equipment

and

telematics"
section.
PEUGEOT CONNECT USB
This connection box, consisting of a jACK socket and a USB port, is
located in the front armrest.
With the USB port, it permits the connection of a portable device, such \
as a digital audio player of the iPod
® or USB memory stick type.
With the
j
ACK socket, it permits the connection of any type of portable
player.
It

reads

the

audio

file

formats

(mp3,
ogg, wma, wav...) which are
transmitted


to

your

audio

equipment
and heard via the vehicle's
speakers.
If


the

device

is

connected

to

the

USB port, you can manage these files
using the steering mounted controls or the audio system control panel
and display them in the multifunction screen.If the portable device is connected to the USB port, it is charged
automatically when in use.
For


more

information

on

the

use of this equipment, refer to the
corresponding


audio

part

of

the

"Audio equipment and telematics"
section.
3/
EASE OF USE and COMFORT

76
RCZ_en_Chap04_visibilite_ed01-2015
Model without AUTO lightingModel with AUTO lighting
MANUAL CONTROLS
The lighting is controlled directly by the driver by means of the ring A
and the stalk B.
A.

Main lighting mode selection ring: turn it to position the symbol
required

facing the mark.
Lighting off / daytime running lamps.
Automatic illumination of headlamps.
B.

Stalk for switching headlamps: pull it to switch between dipped
headlamps / main beam headlamps.
In the lamps of

f and sidelamps modes, the driver can switch on the
main
beam headlamps temporarily ("headlamp flash") by maintaining a
pull on the stalk.Sidelamps only

.
Dipped or main beam headlamps.
dISPLAYS
Lighting of the corresponding indicator lamp on the instrument panel
confirms the switching on of the lighting selected.
The instrument panel has permanent back-lighting, both day and night.
In this case, illumination of the instrument panel is not linked to the \
exterior lighting.

79
RCZ_en_Chap04_visibilite_ed01-2015
AUTOMATIC ILLUMINATION OF HEA d LAMPS
When a low level of ambient light is detected by a sunshine sensor, the
number plate lamps,
sidelamps and dipped beam headlamps are switched
on automatically, without any action on the part of the driver. They can also
come on if rain is detected, at the same time as automatic operation of \
the
windscreen wipers.
As
soon as the brightness returns to a sufficient level or after the windscreen
wipers are switched of

f, the lamps are switched off automatically.
Activation
F Turn the ring to the "AUTO" position. The activation of the function is accompanied by the display of a message in the screen.
deactivation
F Turn the ring to another position. Deactivation of the function is accompanied by the display of a message in the screen.
MANUAL GUI d E - ME - HOME LIGHTING
The temporary illumination of the dipped beam headlamps after the
vehicle's ignition has been switched off makes the driver's exit easier
when the light is poor.
Switching on
F With the ignition off, "flash" the headlamps using the lighting stalk.
F A

further "headlamp flash" switches the function off.
Switching off
The manual guide-me-home lighting switches off automatically after a
set time.
4/
VISIBILITY

80
RCZ_en_Chap04_visibilite_ed01-2015
AUTOMATIC GUId E - ME - HOME
LIGHTING
Operating fault
In the event of a malfunction of the sunshine sensor, the
lighting comes on, this warning lamp is displayed in the
instrument panel and/or a message appears in the screen,
accompanied by an audible signal.
Contact

a

PEUGEOT

dealer or a qualified workshop.
In

fog

or snow, the sunshine sensor may detect sufficient light. In
this case, the lighting will not come on automatically

.
Do not cover the sunshine sensor, coupled with the rain sensor
and located in the centre of the windscreen behind the rear view
mirror; the associated functions would no longer be controlled. When the automatic illumination of headlamps function is activated
(lighting control stalk in the "
AUTO" position), under low ambient light
the dipped beams headlamps come on automatically when the ignition
is switched off.
Programming
Activation or deactivation, as well as the duration of the guide-me-home\

lighting, is set in the vehicle configuration menu.

81
RCZ_en_Chap04_visibilite_ed01-2015
MANUAL AD j USTMENT OF
HALOGEN

HEADLAMPSA UTOMATIC AD j USTMENT OF
xENON

HEADLAMPS
To avoid dazzling other road users, the height of the halogen bulb
headlamps must be adjusted according to the load in the vehicle.
0.

1 or 2 people in the front seats.
-.


3 people.
1.


4 people.
-.


Intermediate setting.
2.


4 people + maximum authorised loads.
-.


Intermediate setting.
3.


Driver + maximum authorised loads. In order to avoid causing a nuisance to other road users, this system
corrects the height of the xenon headlamp beams automatically and
when stationary

, in relation to the load in the vehicle.
If a malfunction occurs, this warning lamp is displayed on the
instrument panel, accompanied by an audible signal and a
message in the screen.
The system then places your headlamps in the lowest position.
Initial setting is position "0". Do not touch the xenon headlamp bulbs.
Contact
a PEUGEOT

dealer or a qualified workshop.
Travelling abroad
If using your vehicle in a country that drives on the other side of
the road, the headlamps must be adjusted to avoid dazzling on-
coming drivers.
Contact
a PEUGEOT

dealer or a qualified workshop.
4/
VISIBILITY