weight RENAULT KANGOO 1997 KC / 1.G Chassis Workshop Manual

RENAULT KANGOO 1997 KC / 1.G Chassis Workshop Manual KANGOO 1997 KC / 1.G RENAULT RENAULT https://www.carmanualsonline.info/img/7/1734/w960_1734-0.png RENAULT KANGOO 1997 KC / 1.G Chassis Workshop Manual

Page 20 of 105

RENAULT KANGOO 1997 KC / 1.G Chassis Workshop Manual FRONT AXLE
Stub axle carrier bearing
31
SPECIAL TOOLING REQUIRED
Rou. 15 -01 Shaft protector
Rou. 604 -01 Hub locking tool
T.Av.476 Ball joint extractor
T.Av.   1050-02 Tool for pushing driveshaft bac

Page 21 of 105

RENAULT KANGOO 1997 KC / 1.G Chassis Workshop Manual FRONT AXLE
Stub axle carrier bearing
31
79057S
REFITTING
Fit the bearing on the press, into the stub axle car-
rier using a tube of external diameter 
70 mm and bore 66 mm, taking the weight on the
ex

Page 40 of 105

RENAULT KANGOO 1997 KC / 1.G Chassis Workshop Manual REAR AXLE
Bushes, tubular rear axle
Press on the assembly (D) and (C) until the sleeve
(C) reaches the edge (3) of the tube.
Fit :
- the small bearing race in sleeve (C),
- sleeve (C) on the tube, usi

Page 42 of 105

RENAULT KANGOO 1997 KC / 1.G Chassis Workshop Manual REAR AXLE
Four bar rear axle
The four bar rear axle comprises:
- two arms connected by an "L" section. This assembly (1) cannot be dismantled. Any deformation would
mean its complete replacement.
- tw

Page 52 of 105

RENAULT KANGOO 1997 KC / 1.G Chassis Workshop Manual 88659R
WHEELS AND TYRES
Wheel balancing
35
BALANCE WEIGHTS
Only use weights provided by the Parts
Department:
- fitted using hooks to steel wheels (hook is part
of the weight),
- fitted using hooks (f