heating RENAULT KANGOO 1997 KC / 1.G Electrical Equipment Workshop Manual

REAR AND INTERIOR LIGHTS
Fuses
81
FUSE BOX (passenger compartment)
This unit is located in the passenger compartment on the driver’s side.
Allocation of fuses (depending on equipment level).
Symbol Rating Description
10
15
30
30
30
20
15
15
15
15
10
25
25
20
15
15
25Instrument panel / Electric rear view mirrors/ Radio / Car phone
Courtesy light / Immobiliser
Consumer cut-out
Towing connection
Heated rear screen
Central door locking / Immobiliser
Front fog lights
Rear screen wash - wipe/
Reversing lights / Heated rear screen / Immobiliser
/ Lights on reminder buzzer
Front wash - wipe
Stop lights/ Instrument panel/ Airbag / Pretensioners
Anti-lock braking system (ABS)
Left hand electric window
Right hand electric window
Heated seats
Air conditioning
Radio / Cigar lighter / Car phone
Heating
81-2

Symbol Rating Description
10
10
10
10
7.5
7.5
7.5
15
10
10Left hand main beam headlight/ Instrument panel
Right hand main beam headlight
Left hand dipped headlight
Right hand dipped headlight
Left hand side light/
Instrument panel / Controls lighting / Radio / Heating Control Panel
Right hand side light/ Controls lighting
Rear fog light
Horn
Flasher unit
Heated rear view mirrors
REAR AND INTERIOR LIGHTS
Fuses
81
NOTE : To determine the exact position of the fuses, refer to the vehicle fuse box label or the Technical Note
"Wiring Diagrams".
Allocation of fuses (depending on equipment level). (cont)
81-3

REAR AND INTERIOR LIGHTS
Fuses
81
FUSE BOX (engine compartment)
12840S
Rating D7F F8Q E7J
1 30A Injection (238-279) - Injection (236)
2 30AFan assembly
(234)-Fan assembly
(234)
3 - 15A 5A - Injection (238) Injection (120)
4 15A -Engine functions
(238-250-450-927)-
5 15AFan assembly / ignition
(234-778)-Injection / ignition
(236-250-663-664)
6 70A - Preheating unit -
7 50A -Engine functions
(234-450-700)-
8 60A Dashboard (209-713) Dashboard (209-713) Dashboard (209-713)
9 60A Dashboard (104-209) Dashboard (104-209) Dashboard (104-209)
10 60A Electric windows / AC fan Electric windows Electric windows / AC fan
11 60A ABS ABS ABS
81-4

IMMOBILISER
Coded key immobiliser system
82
Removal - Refitting
The dashboard must be partially removed to re-
move the decoder unit.
Remove:
- the steering wheel with the wheels straight,
- the half cowlings under the steering wheel,
- the knee protector under the steering column,
- the lights and wiper controls,
- the instrument panel surround,
- the instrument panel,
- the ashtray, its mounting and the two dash-
board mounting bolts on the heating unit,
- the trim at the bottom of the dashboard on the
driver’s side,
- the two speaker grilles on the dashboard,
- the dashboard mountings.
13065R1
Move the dashboard as far back as possible, dis-
connect the decoder unit and remove the two
mounting bolts (B) using a small ratchet fitted
with a Torx 20 socket.
•A red immobiliser warning light on the instru-
ment panel used to :
- indicate activation of the engine immobiliser
system,
- signal a fault in the system for vehicles with a
coded solenoid valve (diesel) or non-
recognition of the key,
- signal entry into the door locking remote
control resynchronisation mode (depending
on equipment).
• An injection warning light (petrol vehicle)
which indicates a fault in the:
- injection,
- engine immobiliser system when the engine
is running (flashes during deceleration and
at idle speed).
82-4

INSTRUMENT PANEL
Dashboard
83
- the fuse boards (five bolts).
Unclip the diagnostic socket.
Remove:
- the heating control unit (two bolts),Remove:
- the steering column mountings (two bolts, two
nuts),
- the ashtray and its mounting (two bolts).
Disconnect the connectors.
12963R1
12965-1R 12963R
12965-1R1
83-4

INSTRUMENT PANEL
Instrument panel
83
13066S
CONNECTION (fullest version)
Connector C (clear)
Track Allocation
1 Left hand indicator tell-tale
2 Dipped headlight tell-tale
3 Main beam headlight tell-tale
4 Catalytic converter fault warning light
5 Preheating warning light
6 Airbag warning light
7 Opening element warning light
8 + lighting
9 Coolant temperature gauge
10 Not used
Connector M (brown)
Track Allocation
1 Fuel gauge earth
2 Fuel gauge
3 + before ignition
4 Not used
5 Not used
6 Electronic fault warning light
7 OBD warning light (Not used)
8 AT warning light
9 Not used
10 + after ignition
83-8

WIRING
Remote control for door locking
88
Ignition off:
1.Press and hold the central door locking button
for a few seconds until the doors lock and un-
lock.
From this moment, the operator has 10 se-
conds to carry out the next operation.
NOTE: The 10 seconds are shown by the illu-
mination of the red immobiliser warning light
(if fitted) and bargraph 17 LH on the XR25
(code
D56, fiche n° 56).
2.Press the remote control twice (the doors lock
and unlock and the red warning light extin-
guishes, if fitted).
NOTE : If both remote controls (if fitted) are
desynchronised, two resynchronisation proce-
dures will have to be carried out (one for each
remote control).
IMPORTANT: To ensure that the infrared code
is correctly transmitted it is essential to direct
the transmitter correctly towards the receiver.
If the procedure fails it will be necessary to
restart from the beginning (infrared remote
control only).
3.The procedure is complete - check that the
doors lock correctly.
Removal - Refitting
The dashboard must be partially removed to re-
move the decoder unit.
Remove:
- the steering wheel with the wheels straight,
- the half cowlings under the steering wheel,
- the knee protector under the steering column,
- the lights and wiper controls,
- the instrument panel surround,
- the instrument panel,
- the ashtray, its mounting and the two dash-
board mounting bolts on the heating unit,
- the trim at the bottom of the dashboard on the
driver’s side,
- the two speaker grilles on the dashboard,
- the dashboard mountings.
THE DECODER UNIT
The decoder unit is located in the left hand side of
the dashboard (A).
12967R
88-5