light RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual KANGOO 1997 KC / 1.G RENAULT RENAULT https://www.carmanualsonline.info/img/7/1731/w960_1731-0.png RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual

Page 3 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual Contents
Consumables
Identification
Oil consumption
Oil pressure
Engine - Gearbox
Engine and transmission assembly
Sump
Crankshaft seal, timing end
Oil pump10-1
10-1
10-2
10-3
10-4
10-9
10-25
10-29
10

Page 4 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual Page
Cooling
Specifications
Filling and bleeding
Testing
Diagram
Water pump
Exhaust
General
Exhaust pipe assembly
Fuel tank
Tank
Sender unit
Pump and sender unit assembly
Engine suspension
Suspended e

Page 39 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual TOP AND FRONT OF ENGINE
Timing belt
11
Tighten the tension wheel nut.
Turn the engine  at least twice  (never in the op-
posite direction to normal operation).
Insert the pin in the engine at TDC,  th

Page 93 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual DIESEL EQUIPMENT
General
13
The use of electronic injection in Diesel engines has allowed the operational power of these engines  to be
optimised, thus reducing the emission rate of pollutant gases.

Page 98 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual DIESEL EQUIPMENT
Location of components
13
20 EGR  valve
13047-1R
7Engine speed sensor
13048R
87970R
17Diesel injection fault warning light
18Preheating warning light
Warning light illuminates when ig

Page 112 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual DIESEL EQUIPMENT 
Injection warning light 
13
OPERATING PRINCIPLE OF THE DIESEL INJECTION WARNING LIGHT ON THE INSTRUMENT PANEL
On switching on the ignition, the diesel injection fault warning light i

Page 113 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual DIESEL EQUIPMENT 
Pre-postheating control
13
The pre-postheating function is controlled  by  the
computer, which controls the preheating plug re-
lay housing. 
1) Ignition - Preheating
The preheating

Page 117 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual DIESEL EQUIPMENT 
Computer
13
PRM1316
CONNECTION
1-<-
2-----
3-----
4-->-
5-->-
6-->-
7-<--
8-<--
9-->-
10-<--
11-<--
12-<--
13-><-Computer supply
Computer earth
Sensor earth
Potentiometer lever suppl

Page 123 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual 12338R
DIESEL EQUIPMENT
Pump - Timing
13
MODIFICATION OF TOOL  Mot. 1358
For the adjustment of  HTD2 pullies,   carry out the
following  modification:
File down the three brackets on the tool by  1.5

Page 125 of 208

RENAULT KANGOO 1997 KC / 1.G Engine And Peripherals Workshop Manual DIESEL EQUIPMENT
Pump - Timing
13
DI1303-1
- Fit pin  Mot. 1054.
12419R
- Keep a constant  pressure on the pin.
- Turn the engine slowly until the pin
penetrates in the slot in  the crankshaft. 
-   U
Page:   1-10 11-20 next >