instrument panel RENAULT KANGOO 2013 X61 / 2.G ABS Bosch 8.1 Workshop Manual
[x] Cancel search | Manufacturer: RENAULT, Model Year: 2013, Model line: KANGOO, Model: RENAULT KANGOO 2013 X61 / 2.GPages: 57, PDF Size: 1.44 MB
Page 6 of 57
38C-6V1 MR-376-X76-38C000$040.mif
ANTI-LOCK BRAKING SYSTEM
Fault finding – Operating diagram38C
ABS BOSCH 8.1
Vdiag No.: 18
1 ABS computer 6 Front wheel speed sensor
2 Brake switch 7 Rear wheel speed sensor
3 After ignition supply 8 Diagnostic socket
4 Permanent supply 9 Vehicle speed signal
5 Earth 10 Fault warning lights on the instrument panel
Electric circuit Hydraulic circuit
Page 7 of 57
38C-7V1 MR-376-X76-38C000$050.mif
38C
ABS BOSCH 8.1
Vdiag No.: 18
On this vehicle, the main functions of the ABS are as follows:
● electronic distribution of braking between front and rear by controlling skidding of the rear wheels,
● keeping the wheels from locking by controlling skidding of the four wheels.
The ABS prevents the wheels from locking when braking. This function allows the vehicle to be steered under
braking and ensures vehicle stability under braking.
EBD (electronic braking distribution):
The electronic braking distribution unit optimises the brakeforce distribution between the front and rear axles. This
function ensures vehicle stability under braking.
Fault finding warning lights programming
Instrument panel warning light Meaning
- ABS ABS function inoperative.
Brake faults ABSElectronic braking regulation and ABS
function not working
Brake faults
flashing at 2HzABS flashing at 2HzABS computer is in fault finding mode.
- ABS flashing at 8HzTachometer index or vehicle
configuration not programmed.
ANTI-LOCK BRAKING SYSTEM
Fault finding – System operation
Page 21 of 57
38C-21
AFTER REPAIRClear the computer memory using command RZ001 Fault memory.
Carry out a road test followed by another check with the diagnostic tool.
V1 MR-376-X76-38C000$090.mif
ANTI-LOCK BRAKING SYSTEM
Fault finding – Interpretation of faults38C
ABS BOSCH 8.1
Vdiag No.: 18
DF020
PRESENTTACHOMETRIC INDEX PROGRAMMING
NOTESNone.
The ABS BOSCH 8.1 computer with "tachometric function" must have an index value in order to calculate the
vehicle speed from the speed at which the tyres turn.
Use command VP007 Tachometric index and check that it has been taken into account using parameter PR030
Tachometric index.
IMPORTANT:
The vehicle speed information is not delivered to the other computers by the ABS computer.
The vehicle speed signal is delivered by a speed sensor located on the gearbox, which informs the
computers (instrument panel, engine management, etc.).
If the fault is still present, contact the Techline.
ABS8.1X76_V18_DF020P