dashboard RENAULT SCENIC 2007 J84 / 2.G Electrical Equipment - Radio Workshop Manual

RADIO
General Information
86A
86A - 3V2 MR-372-J84-86A000$099_eng.mif
Special features of radios in the PN range:
PN0: radio with built-in display.
PN1: radio with remote display.
PN2: radio and cassette player with built-in display.
PN3: radio and cassette player with remote display.
PN4: radio and CD player with built-in display.
PN5: radio and CD player with remote display.
Notes:
●All radios are designed to control a CD changer.
●There is a special procedure for replacing the CD changer located in the dashboard front panel.
●According to the vehicle version, the remote displays may have a 24 or 30-track connector or two 15-track
connectors. This display may be built into the instrument panel.

RADIO
Recovering a jammed CD
86A
86A - 30V2 MR-372-J84-86A000$891_eng.mif
REMOVAL
Remove the two bolts (A).
Turn the CD changer upside down.
Remove the 6 bolts (B).Turn the CD changer upside down.
Remove the cover.
Remove the mechanism from its housing.
CHANGER IN THE DASHBOARD

RADIO
Recovering a jammed CD
86A
86A - 31V2 MR-372-J84-86A000$891_eng.mif
Remove the two bolts (C).
Remove the CD guide arm.
Disconnect connector (D).Remove the eight bolts (E),
Remove both clips from the two connectors.
CHANGER IN THE DASHBOARD

RADIO
Recovering a jammed CD
86A
86A - 32V2 MR-372-J84-86A000$891_eng.mif
Remove both ribbon cables.
Remove the upper section of mechanism.Turn the guides and push the mechanism as shown in
the diagram in order to raise or lower the CDs.
The CDs can now be accessed.
CHANGER IN THE DASHBOARD
IMPORTANT
Never refit the changer mechanism once it has been
removed.