gearbox RENAULT SCENIC 2008 J84 / 2.G Electrical Equipment - Instrument Panel Workshop Manual

83A-9
MR-372-J84-83A000$252.mif
V8
83A
INSTRUMENT PANEL
Fault finding - Configurations and programming
1. CONFIGURATIONS:
WARNING
Run a configuration read to ensure that the new configuration values are used by the system.
LC no. CF no. Configuration Note:
LC001 CF018Reserve capacityAllows the instrument panel to be
configured for switching the indicator
light on.
LC005 CF034 Body type
LC006 CF035Tank capacity
LC007 CF036Key/Card
LC008 CF037 Clock
LC011 CF038 Dimmer present
LC029 CF149 Gearbox typeIf the vehicle has an automatic or sequential
gearbox, check that the instrument panel
shows the gear selected.
If the vehicle is not equipped with an
automatic or sequential gearbox, check that
there is no "Check gearbox" message (this
message indicates the absence of the
automatic gearbox frames if the instrument
panel has been configured for an automatic or
sequential gearbox).
LC030 Vehicle typeValue defined by default: Mégane II
TDB ph2 (EG/MG)
Prog Version: 04xx
Vdiag No.: 08, 0C
MR-372-J84-83A000$252.mif

83A-46
MR-372-J84-83A000$819.mif
V8
INSTRUMENT PANEL
Fault finding - Interpretation of commands83A
TDB ph2 (EG/MG)
Prog Version: 04xx
Vdiag No.: 08, 0C
AC011
DOT MATRIX DISPLAY
NOTESIMPORTANT
–Affects the opening elements indicator lights (on mid-range instrument panels).
–Affects tyre pressure monitor system warning lights (on mid-range instrument panel
if fitted to the vehicle).
–Affects automatic and sequential gearbox warning lights.
There must be no present or stored faults.
Activate the dot matrix display using command AC011 Dot matrix display.
The dot matrix display lights up.
If there is a lighting fault, contact the Techline.
AFTER REPAIRRepeat the conformity check from the start.