torque RENAULT SCENIC 2008 J84 / 2.G Engine And Peripherals - Starting Charging Workshop Manual

16A-4V1 MR-372-J84-16A000$030.mif
16A
Scénic II ph 2
The function of the charging circuit is to:
•Ensure that electrical energy is supplied to the vehicle whilst respecting the dynamic performance constraints of
the engine and transmission assembly: the alternator resisting torques and the torque gradients measured must
be managed.
•To control alternator loading and load shedding during engine management authorisation or variation of the
electrical load.
•To ensure the quality of the on board network voltage in terms of the voltage level and variation (voltage gradient
management).
•To optimise the battery charge by applying a voltage to its terminals correlating to its initial charge status (in sleep
mode) and to its internal temperature.
•To inform the engine management about the mechanical power taken from the accessories pulley, the alternator
charge rate and the rotor excitation current value.
•To run fault finding on the charging circuit: "Battery" warning light display.
The function of the starting circuit is to:
•start the vehicle when there is a starting request from the ignition key.
STARTING - CHARGING
Fault finding – Features