tyre pressure RENAULT SCENIC 2008 J84 / 2.G Passenger Comparment Connection Unit User Guide
[x] Cancel search | Manufacturer: RENAULT, Model Year: 2008, Model line: SCENIC, Model: RENAULT SCENIC 2008 J84 / 2.GPages: 391
Page 67 of 391
PASSENGER COMPARTMENT CONNECTION UNIT
Fault finding - Configurations and programming
87B
87B-67
PASSENGER COMPARTMENT CONNECTION UNIT
Fault finding - Configurations and programming
87B
87B-67V9 MR-372-J84-87B000$215.mif
UCH
Vdiag No.: 44, 48,
4C, 4D, 4F, 50
UCH configurations (continued):
T.O*: Sunroof.Configuration
readingConfigurationName of
configurationChoice of
configurationVdiag
LC017Tyre Pressure Monitor
FunctionSC008 UCH typeWITH/WITHOUT44, 48, 4C, 4D, 4F
and 50
LC018Hazard warning lights
switched on by ABS CF024WITH/WITHOUT44, 48, 4C, 4D, 4F
and 50
LC019Rear screen wiper park
position controlAutomatic
configurationWITH/WITHOUT 44, 48, 4C, 4D
LC020Factory fitted perimeter
protection SC008 UCH typeWITH/WITHOUT 4C, 4D, 4F and 50
LC021Type of windscreen
SC008 UCH typeTINTED/HEAT
INSULATING44, 48, 4C, 4D, 4F
and 50
LC023 Engine type CF028F ENGINE/K
ENGINE/M
ENGINE44, 48, 4C, 4D, 4F
and 50
LC025See-me-home lighting CF032WITH/WITHOUT 44, 48, 4C, 4D
LC029 Selective door opening SC008 UCH typeWITH/WITHOUT44, 48, 4C, 4D, 4F
and 50
LC030Heating resistor type SC008 UCH typeNONE/1000 W/
1800 W 44, 48, 4C, 4D, 4F
and 50
LC035Child safety lockSC016 Child safety
lockWITH/WITHOUT 4C, 4D, 4F and 50
Automatic
configurationWITH/WITHOUT 44 and 48
LC041New vehicle storage modeVP016 ACTIVE/
INACTIVE 4F and 50
LC044 Rain/light sensor SC008 UCH typeWITH/WITHOUT 4F and 50
LC064 Rear screen wiper CF166 WITH/WITHOUT 4F and 50
LC070One-touch window(s)/
sunroof SC008 UCH typeWITH/WITHOUT 4F and 50
LC122Rear access aerialsCF224WITH/WITHOUT 50
Page 78 of 391
PASSENGER COMPARTMENT CONNECTION UNIT
Fault finding - Interpretation of faults
87B
87B-78
PASSENGER COMPARTMENT CONNECTION UNIT
Fault finding - Interpretation of faults
87B
87B-78V9 MR-372-J84-87B000$301.mif
UCH
Vdiag No.: 44, 48,
4C, 4D, 4F, 50
DF006
DF007
DF008
DF009
PRESENTFRONT LEFT-HAND WHEEL VALVE SENSOR
FRONT RIGHT-HAND WHEEL VALVE SENSOR
REAR RIGHT-HAND WHEEL VALVE SENSOR
REAR LEFT-HAND WHEEL VALVE SENSOR
2.DEF: Sensor internal electronic fault
3.DEF: Sensor internal electronic fault
4.DEF: Sensor internal electronic fault
5.DEF: Sensor internal electronic fault
6.DEF: Sensor internal electronic fault
7.DEF: Sensor internal electronic fault
8.DEF: Sensor internal electronic fault
1.DEF: No sensor signal.
NOTESSpecial notes:
Any operation involving the replacement of a valve, or the removal of a tyre requires
perfect knowledge of the precautions (see MR 364 (Mégane II) or MR 370 (Scénic II),
Mechanical, 35A, Wheels and tyres).
Before any operation, ensure that all the wheels have tyre pressure monitoring valves,
and that the spare wheel has not been fitted.
For faults DF006 to DF009, if the fault is present during the first few kilometres, reprogram the 4 valves.
In the event of a programming failure, replace the valve concerned (see MR 364 (Mégane II) or MR 370
(Scénic II), Mechanical, 35B, Tyre pressure monitor system)
Check that there are no wheels with rubber valves. If there are, replace them with wheels with a valve fitted with
a sensor and carry out a road test.
If the fault is still present, program the 4 valves.
If the fault is still present, replace the valve (see MR 364 (Mégane II) or MR 370 (Scénic II), Mechanical, 35B,
Tyre pressure monitor system).
The correspondence between fault numbers and the valve concerned is described below:
–DF006 Front left-hand wheel valve sensor,
–DF007 Front right-hand wheel valve sensor,
–DF008 Rear right-hand wheel valve sensor,
–DF009 Rear left-hand wheel valve sensor.
Once the sensor has been replaced, program the four valve codes according to procedure SC002 Programming
the four valve codes (see Configurations and programming).
AFTER REPAIRCarry out another fault finding check on the system.
Clear the stored faults.
Deal with any other faults.
UCH_V44_DF006P/UCH_V44_DF007P/UCH_V44_DF008P/UCH_V44_DF009P/UCH_V48_DF006P/UCH_V48_DF007P/UCH_V48_DF008P/
UCH_V48_DF009P/UCH_V4C_DF006P/UCH_V4C_DF007P/UCH_V4C_DF008P/UCH_V4C_DF009P/UCH_V4D_DF006P/
UCH_V4D_DF007P/UCH_V4D_DF008P/UCH_V4D_DF009P/UCH_V4F_DF006P/UCH_V4F_DF007P/UCH_V4F_DF008P/
UCH_V4F_DF009P/UCH_V50_DF006P/UCH_V50_DF007P/UCH_V50_DF008P/UCH_V50_DF009P
Page 89 of 391
PASSENGER COMPARTMENT CONNECTION UNIT
Fault finding - Interpretation of faults
87B
87B-89
PASSENGER COMPARTMENT CONNECTION UNIT
Fault finding - Interpretation of faults
87B
87B-89V9 MR-372-J84-87B000$301.mif
UCH
Vdiag No.: 44, 48,
4C, 4D, 4F, 50
DF016
DF017
PRESENT
AT LEAST 2 IDENTICAL CODES/SUMMER SET
AT LEAST 2 IDENTICAL CODES/WINTER SET
NOTESSpecial notes:
Any operation involving the replacement of a valve, or removal of a tyre requires full
knowledge of the specified precautions (Mégane II: see MR 364, Mechanical, 35B
Tyre pressure monitoring system; Regarding Scenic II: see MR 370, Mechanical,
35B Tyre pressure monitoring system).
Before any operation, ensure that all the wheels have tyre pressure monitoring valves,
and that the spare wheel has not been fitted on the same axle assembly.
Fault DF016 At least 2 identical codes/summer set appears when at least two valve codes are identical in the
summer wheel set (incorrect programming of four valve codes).
In this case, restart programming of the four valves according to procedure SC002 Programming of the four
valve codes (see Configurations and programming).
Fault DF017 At least 2 identical codes/winter set appears when at least two valve codes are identical in the
winter wheel set (incorrect programming of four valve codes).
In this case, restart programming of the four valves according to procedure SC002 Programming of the four
valve codes (see Configurations and programming).
AFTER REPAIRCarry out another fault finding check on the system.
Clear the stored faults.
Deal with any other faults.
UCH_V44_DF016P/UCH_V48_DF016P/UCH_V4C_DF016P/UCH_V4D_DF016P/ UCH_V4F_DF016P/UCH_V50_DF016P/
UCH_V44_DF017P/UCH_V48_DF017P/UCH_V4C_DF017P/UCH_V4D_DF017P/ UCH_V4F_DF017P/UCH_V50_DF017P
Page 90 of 391
PASSENGER COMPARTMENT CONNECTION UNIT
Fault finding - Interpretation of faults
87B
87B-90
PASSENGER COMPARTMENT CONNECTION UNIT
Fault finding - Interpretation of faults
87B
87B-90V9 MR-372-J84-87B000$301.mif
UCH
Vdiag No.: 44, 48,
4C, 4D, 4F, 50
DF018
DF019
PRESENT
PROGRAMMING OF 4 CODES IN SUMMER SET NOT
PERFORMED
PROGRAMMING OF 4 CODES IN WINTER SET NOT PERFORMED
NOTESSpecial notes:
Any operation involving the replacement of a valve, or removal of a tyre requires full
knowledge of the specified precautions (Mégane II: see MR 364, Mechanical, 35B
Tyre pressure monitoring system; Regarding Scenic II: see MR 370, Mechanical,
35B Tyre pressure monitoring system).
Before any operation, ensure that all the wheels have tyre pressure monitoring valves,
and that the spare wheel has not been fitted.
Fault DF018: 4 summer set codes not programmed is present if the UCH has not programmed a valve code for
the summer tyre set (after replacing the sensors or UCH).
Fault DF019: 4 winter set codes not programmed is present if the UCH has not programmed a valve code for
the winter tyre set and the winter tyre set is selected.
In the status menu, note the type of tyre set stored in the memory (summer or winter).
In the status menu, note the valve codes allocated for the type of tyre stored in the memory.
Program the four valve codes using the procedure SC002 Programming the four valve codes (see
Configurations and programming).
AFTER REPAIRCarry out another fault finding check on the system.
Clear the stored faults.
Deal with any other faults.
UCH_V44_DF018P/UCH_V48_DF018P/UCH_V4C_DF018P/UCH_V4D_DF018P/ UCH_V4F_DF018P/UCH_V50_DF018P/
UCH_V44_DF019P/UCH_V48_DF019P/UCH_V4C_DF019P/UCH_V4D_DF019P/ UCH_V4F_DF019P/UCH_V50_DF019P
Page 116 of 391
PASSENGER COMPARTMENT CONNECTION UNIT
Fault finding - Interpretation of faults
87B
87B-116
PASSENGER COMPARTMENT CONNECTION UNIT
Fault finding - Interpretation of faults
87B
87B-116V9 MR-372-J84-87B000$344.mif
UCH
Vdiag No.: 44, 48,
4C, 4D, 4F, 50
DF319
DF320
DF321
DF322
PRESENTFRONT LEFT-HAND WHEEL TYRE PRESSUREFRONT RIGHT-HAND WHEEL TYRE PRESSURE
REAR RIGHT-HAND WHEEL TYRE PRESSURE
REAR LEFT-HAND WHEEL TYRE PRESSURE
1.DEF: Over-inflation
2.DEF: Under-inflation
3.DEF: Puncture
NOTESThe system is likely to generate false warnings of a puncture or under-inflation
Deflate the wheel by approximately 500 mbar, then reinflate this wheel to the nominal pressure.
If the fault is still present, contact Techline.
AFTER REPAIRCarry out another fault finding check on the system.
Clear the stored faults.
Deal with any other faults.
UCH_V44_DF319P/UCH_V48_DF319P/UCH_V4C_DF319P/UCH_V4D_DF319P/UCH_V4F_DF319P/UCH_V50_DF319P
UCH_V44_DF320P/UCH_V48_DF320P/UCH_V4C_DF320P/UCH_V4D_DF320P/UCH_V4F_DF320P/UCH_V50_DF320P
UCH_V44_DF321P/UCH_V48_DF321P/UCH_V4C_DF321P/UCH_V4D_DF321P/UCH_V4F_DF321P/UCH_V50_DF321P
UCH_V44_DF322P/UCH_V48_DF322P/UCH_V4C_DF322P/UCH_V4D_DF322P/UCH_V4F_DF322P/UCH_V50_DF322P
Page 130 of 391
PASSENGER COMPARTMENT CONNECTION UNIT
Fault finding - Conformity check
87B
87B -130
PASSENGER COMPARTMENT CONNECTION UNIT
Fault finding - Conformity check
87B
87B -130V9 MR-372-J84-87B000$387.mif
UCH
Vdiag No.: 44, 48,
4C, 4D, 4F, 50
FUNCTION: TYRES
Sub-function: Tyre approval
NOTESOnly carry out this conformity check after a complete check with the diagnostic tool
(fault reading and configuration checks).
Application condition: engine stopped, + after ignition feed present.
Sub-functionParameter or
Status
checked Action Display and Notes Fault finding
Tyre receiver ET040:Tyre pressure
monitoring systemNOT WORKING
ACTIVE If status ET040 is OUT OF
ORDER, consult the fault
finding procedure for status
ET040.
ET032:Front left-hand
wheel valve signalOK
ABSENT
OVER-INFLATED
PUNCTURE
UNDER-INFLATEDCheck that the tyre pressure is
at the recommended pressure
(see MR 364 (Mégane II) or
MR 370 (Scénic II),
Mechanical, 35A, Tyre
pressure: Identification).
If status ET032 is not OK,
consult the fault finding
procedure for status ET032.
PR003:Front left-hand
wheel pressure0 bar < X < 3.55 barIf X = 0 bar, consult the fault
finding procedure for parameter
PR003.
Check that the recommended
pressure (PR009 to PR012)
corresponds correctly to the
vehicle.
PR019:Front left-hand tyre
temperature- 40ºC
50˚C and the pressure is 0 bar.
Perform a road test so that the
sensor emits the actual
temperature and pressure.
ET0033:Front right-hand
wheel valve signalOK
ABSENT
OVER-INFLATED
FLAT
UNDER-INFLATEDCheck that the tyre pressure is
at the recommended pressure
(see MR 364 (Mégane II) or
MR 370 (Scénic II),
Mechanical, 35A, Tyre
pressure: Identification).
If status ET033 is not OK,
consult the fault finding
procedure for status ET033.
Page 131 of 391
PASSENGER COMPARTMENT CONNECTION UNIT
Fault finding - Conformity check
87B
87B -131
PASSENGER COMPARTMENT CONNECTION UNIT
Fault finding - Conformity check
87B
87B -131V9 MR-372-J84-87B000$387.mif
UCH
Vdiag No.: 44, 48,
4C, 4D, 4F, 50
FUNCTION: TYRES
Sub-function: Tyre approval (continued 1)
NOTESOnly carry out this conformity check after a complete check with the diagnostic tool
(fault reading and configuration checks).
Application condition: engine stopped, + after ignition feed present.
Sub-functionParameter or
Status
checked Action Display and Notes Fault finding
Tyre approval PR004:Front right-hand
wheel pressure0 bar < X < 3.55 barIf X = 0 bar, consult the fault
finding procedure for parameter
PR004.
Check that the recommended
pressure (PR009 to PR012)
corresponds correctly to the
vehicle.
PR020:Front right-hand tyre
temperature- 40ºC
50˚C and the pressure is 0 bar.
Perform a road test so that the
sensor emits the actual
temperature and pressure.
ET034:Rear right-hand
wheel valve signalOK
ABSENT
OVER-INFLATED
FLAT
UNDER-INFLATEDCheck that the tyre pressure is
at the recommended pressure
(see MR 364 (Mégane II) or
MR 370 (Scénic II),
Mechanical, 35A, Tyre
pressure: Identification).
If status ET034 is not OK,
consult the fault finding
procedure for status ET034.
PR005:Rear right-hand
wheel pressure0 bar < X < 3.55 barIf X = 0 bar, consult the fault
finding procedure for parameter
PR005.
Check that the recommended
pressure (PR009 to PR012)
corresponds correctly to the
vehicle.
PR021:Rear right-hand tyre
temperature- 40ºC
50˚C and the pressure is 0 bar.
Perform a road test so that the
sensor emits the actual
temperature and pressure.
Page 132 of 391
PASSENGER COMPARTMENT CONNECTION UNIT
Fault finding - Conformity check
87B
87B -132
PASSENGER COMPARTMENT CONNECTION UNIT
Fault finding - Conformity check
87B
87B -132V9 MR-372-J84-87B000$387.mif
UCH
Vdiag No.: 44, 48,
4C, 4D, 4F, 50
FUNCTION: TYRES
Sub-function: Tyre approval (continued 2)
NOTESOnly carry out this conformity check after a complete check with the diagnostic tool
(fault reading and configuration checks).
Application condition: engine stopped, + after ignition feed present.
Sub-functionParameter or
Status
checked Action Display and Notes Fault finding
Tyre approval ET035:Rear left-hand
wheel valve signalOK
ABSENT
OVER-INFLATED
FLAT
UNDER-INFLATEDCheck that the tyre pressure is
at the recommended pressure
(see MR 364 (Mégane II) or
MR 370 (Scénic II),
Mechanical, 35A, Tyre
pressure: Identification).
If status ET035 is not OK,
consult the fault finding
procedure for status ET035.
PR006:Rear left-hand
wheel pressure0 bar < X < 3.55 barIf X = 0 bar, consult the fault
finding procedure for parameter
PR006.
Check that the recommended
pressure (PR009 to PR012)
corresponds correctly to the
vehicle.
PR022:Rear left-hand tyre
temperature- 40ºC
50˚C and the pressure is 0 bar.
Perform a road test so that the
sensor emits the actual
temperature and pressure.
Page 133 of 391
PASSENGER COMPARTMENT CONNECTION UNIT
Fault finding - Conformity check
87B
87B -133
PASSENGER COMPARTMENT CONNECTION UNIT
Fault finding - Conformity check
87B
87B -133V9 MR-372-J84-87B000$387.mif
UCH
Vdiag No.: 44, 48,
4C, 4D, 4F, 50
FUNCTION: TYRES
Sub-function: Tyre management
fr*: front,
rr*: rear.
NOTESOnly carry out this conformity check after a complete check with the diagnostic tool
(fault reading and configuration checks).
Application condition: engine stopped, + after ignition feed present.
Sub-functionParameter or
Status
checked Action Display and Notes Fault finding
Tyre
management PR009:Fr* wheel low speed
recommended
pressure.
In barCheck that the values entered
are actually the recommended
ones (see MR 364 (Mégane II)
or MR 370 (Scénic II),
Mechanical, 35A, Tyre
pressure: Identification).
Otherwise, enter the
recommended pressures using
command VP005 Write
recommended pressures. PR010:Rr* wheel low speed
recommended
pressure.
PR012:Fr* wheel high speed
recommended
pressure.
PR011:Rr* wheel high
speed
recommended
pressure.
PR014:Left/right pressure
difference threshold0.5 bar
None. PR015:Low under-inflation
threshold- 0.4 bar
PR059:Puncture report
threshold- 0.6 bar
PR017:Cold over-inflation
threshold0.7 bar
PR018:Warm over-inflation
threshold0.8 bar
Page 139 of 391
PASSENGER COMPARTMENT CONNECTION UNIT
Fault finding - Status summary table
87B
87B -139
PASSENGER COMPARTMENT CONNECTION UNIT
Fault finding - Status summary table
87B
87B -139V9 MR-372-J84-87B000$430.mif
UCH
Vdiag No.: 44, 48,
4C, 4D, 4F, 50PASSENGER COMPARTMENT CONNECTION UNIT
Fault finding - Status summary table
*RCH = Passenger Compartment Heating ResistorTool status Diagnostic tool title Vdiag
ET008UCH blankV44, V48, V4C,
V4D, V4F, V50
ET010Card frequency (in MHz)V44, V48, V4C,
V4D
ET014Control power level
V44, V48, V4C,
V4D, V4F, V50 ET015Passenger compartment fan
ET016Buzzer activation request
ET017Number of RCH* required
ET018Number of RCH* authorised by alternator
ET019Number of RCH* authorised by injection computer
ET020Number RCH* activated.
ET021RCH* 1 relay control
ET022RCH* 2 relay control
ET023RCH* 3 relay control
ET025Retractable roof V48, V4C, V4D,
V4F, V50
ET026Heated rear screen switch
V44, V48, V4C,
V4D, V4F, V50 ET028Heated rear screen button
ET029Air conditioning button
ET030Air conditioning request 2
ET031Fast idle speed request for RCH*
ET032Front left-hand wheel valve signal
ET033Front right-hand wheel valve signal
ET034Rear right-hand wheel valve signal
ET035Rear left-hand wheel valve signal
ET038Service warning light on request
ET039STOP warning light on request
ET040Tyre pressure monitoring system
MR-372-J84-87B000$430.mif