RENAULT TWINGO 2009 2.G Chasiss Workshop Manual

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual https://www.carmanualsonline.info/img/7/1719/w960_1719-0.png RENAULT TWINGO 2009 2.G Chasiss Workshop Manual

Page 121 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual 33A-23
REAR AXLE COMPONENTS
Rigid brake pipe: Removal - Refitting
C44
33A
2 -  Rear right-hand rigid brake pipe
aUnscrew:
-the brake pipe union (4) at the brake hose,
-the rigid brake pipe union on th

Page 122 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual 33A-24
REAR AXLE COMPONENTS
Shock absorber: Removal - Refitting
33A
If a shock absorber is replaced, the shock absorber on
the opposite side must also be replaced.
REMOVAL
I - REMOVAL PREPARATION OPER

Page 123 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual 33A-25
REAR AXLE COMPONENTS
Shock absorber: Removal - Refitting
33A
aUsing a block, bring the component jack into con-
tact under the rear axle, near the shock absorber.
aRemove the lower shock absorb

Page 124 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual 33A-26
REAR AXLE COMPONENTS
Shock absorber: Removal - Refitting
G44
33A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aPosition the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (MR 411, 02

Page 125 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual 33A-27
REAR AXLE COMPONENTS
Shock absorber: Removal - Refitting
G44
33A
aFit a component jack until contact is made with a
shim, under the rear axle near the shock absorber.
aRemove the lower shock ab

Page 126 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual 33A-28
REAR AXLE COMPONENTS
Rear suspension spring: Removal - Refitting
33A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aPosition the vehicle on a two-post lift ( (see Vehicle:
Towing and lifting) ).
aR

Page 127 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual 33A-29
REAR AXLE COMPONENTS
Rear suspension spring: Removal - Refitting
33A
aRefit the shock absorber springs into their housings.
aCompress the rear axle.
aRefit the lower shock absorber mounting bol

Page 128 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual 33A-30
REAR AXLE COMPONENTS
Rear drum bearing: Removal - Refitting
33A
Using a dial gauge connected to the drum, check that
the end float is greater than 0.03 mm.
REMOVAL
I - REMOVAL PREPARATION OPERA

Page 129 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual 33A-31
REAR AXLE COMPONENTS
Rear drum bearing: Removal - Refitting
33A
REFITTING
I - REFITTING PREPARATIONS OPERATION
aClean:
-the internal and external surfaces of the new bear-
ing in contact with t

Page 130 of 281

RENAULT TWINGO 2009 2.G Chasiss Workshop Manual 33A-32
REAR AXLE COMPONENTS
Rear stub axle carrier: Removal - Refitting
33A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aPosition the vehicle on a two-post lift ( (see Vehicle:
Towing and lifting) ).
aR