RENAULT TWINGO 2009 2.G Panelwork Workshop Manual

RENAULT TWINGO 2009 2.G Panelwork Workshop Manual TWINGO 2009 2.G RENAULT RENAULT https://www.carmanualsonline.info/img/7/1724/w960_1724-0.png RENAULT TWINGO 2009 2.G Panelwork Workshop Manual
Trending: wheel, spare wheel, light, sunroof, lights, wiring, mirror

Page 131 of 209

RENAULT TWINGO 2009 2.G Panelwork Workshop Manual 42A-22
FRONT UPPER STRUCTURE
Front wheel arch: Description
42A
Front left-hand wheel arch
Front right-hand wheel arch
There is only one way of replacing this part:
-complete replacement.I - COMPOSITIO

Page 132 of 209

RENAULT TWINGO 2009 2.G Panelwork Workshop Manual 42A-23
FRONT UPPER STRUCTURE
Front wheel arch: Description
42A
Front right-hand wheel arch II -  PART IN POSITION
III - POSITIONING OF LOCAL ELECTRICAL 
EARTHS
120905
No. Description Type Thic-
kness

Page 133 of 209

RENAULT TWINGO 2009 2.G Panelwork Workshop Manual 42A-24
FRONT UPPER STRUCTURE
Front wheel arch: Description
42A
121246
WARNING
To avoid damaging the vehicles electric and electro-
nic components, the earths of any wiring harness
near the weld area m

Page 134 of 209

RENAULT TWINGO 2009 2.G Panelwork Workshop Manual 42A-25
FRONT UPPER STRUCTURE
Front wheel arch, front section: General description
42A
DESIGN OF THE STRUCTURAL COMPONENT
This is the basic part; it only fulfils the function of the
front section of th

Page 135 of 209

RENAULT TWINGO 2009 2.G Panelwork Workshop Manual 42A-26
FRONT UPPER STRUCTURE
Dashboard cross member: Removal - Refitting
42A
REMOVAL
a
I - REMOVAL PREPARATION OPERATION
aLock the airbag computer using the Diagnostic tool
(see Fault finding - Replac

Page 136 of 209

RENAULT TWINGO 2009 2.G Panelwork Workshop Manual 42A-27
FRONT UPPER STRUCTURE
Dashboard cross member: Removal - Refitting
42A
aRemove:
-the bolts (3) ,
-the windscreen aperture lower cross member tie-
rod bolt (4) ,
-the dashboard cross member bolts

Page 137 of 209

RENAULT TWINGO 2009 2.G Panelwork Workshop Manual 42A-28
FRONT UPPER STRUCTURE
Windscreen aperture lower cross member closure panel: Description42A
There is only one way of replacing this part:
-partial replacement.
I - COMPOSITION OF THE SPARE PART

Page 138 of 209

RENAULT TWINGO 2009 2.G Panelwork Workshop Manual 43A-1
SIDE UPPER STRUCTURE
A-pillar: General description
43A
DESIGN OF THE STRUCTURAL COMPONENT
The design of this part is identical for all three vehicles.
On the Modus, the A-pillar is obtained by e

Page 139 of 209

RENAULT TWINGO 2009 2.G Panelwork Workshop Manual 43A-2
SIDE UPPER STRUCTURE
A-pillar: Description
43A
To replace this part, order the A-pillar expanding insert
(A) .
The options for replacing this part are as follows:
-partial replacement of the low

Page 140 of 209

RENAULT TWINGO 2009 2.G Panelwork Workshop Manual 43A-3
SIDE UPPER STRUCTURE
A-pillar: Description
43A
Section C
2 -  Partial front replacementSection D
3 -  Complete replacement
120994
WARNING
Respect the position of this cut which has been
determin
Trending: lights, jacking, wheel, engine, service, light, headlight