RENAULT TWINGO RS 2009 2.G Engine And Peripherals Workshop Manual

RENAULT TWINGO RS 2009 2.G Engine And Peripherals Workshop Manual TWINGO RS 2009 2.G RENAULT RENAULT https://www.carmanualsonline.info/img/7/1710/w960_1710-0.png RENAULT TWINGO RS 2009 2.G Engine And Peripherals Workshop Manual

Page 111 of 652

RENAULT TWINGO RS 2009 2.G Engine And Peripherals Workshop Manual 10A-105
ENGINE AND CYLINDER BLOCK ASSEMBLY
Valves: Adjustment
C44, and K9K
10A
aParts always to be replaced:
-rocker cover gasket
aRemove the rocker cover (see 11A, Top and front
of engine, Rocker cov

Page 112 of 652

RENAULT TWINGO RS 2009 2.G Engine And Peripherals Workshop Manual 10A-106
ENGINE AND CYLINDER BLOCK ASSEMBLY
Valves: Adjustment
D4F or D7F
10A
I - PREPARATION STAGE FOR ADJUSTING THE 
VALVE CLEARANCES
aPosition the vehicle on a two-post lift ( (see Vehicle:
Towing a

Page 113 of 652

RENAULT TWINGO RS 2009 2.G Engine And Peripherals Workshop Manual 10A-107
ENGINE AND CYLINDER BLOCK ASSEMBLY
Flywheel: Removal - Refitting
D4F – D7F – K9K
10A
REMOVAL
I - REFITTING PREPARATIONS OPERATION
aPosition the vehicle on a two-post lift (see Vehicle:
Tow

Page 114 of 652

RENAULT TWINGO RS 2009 2.G Engine And Peripherals Workshop Manual 10A-108
ENGINE AND CYLINDER BLOCK ASSEMBLY
Flywheel: Removal - Refitting
D4F – D7F – K9K
10A
REFITTING
I - REFITTING PREPARATIONS OPERATION
aDo not remove the flywheel drive plate bolts (2) .
aOn

Page 115 of 652

RENAULT TWINGO RS 2009 2.G Engine And Peripherals Workshop Manual 10A-109
ENGINE AND CYLINDER BLOCK ASSEMBLY
Flywheel: Removal - Refitting
D4F – D7F – K9K
10A
Tightening order
aObserve the tightening order.
aTorque and angle tighten, in order, the D4F, D7F fly-

Page 116 of 652

RENAULT TWINGO RS 2009 2.G Engine And Peripherals Workshop Manual 10A-110
ENGINE AND CYLINDER BLOCK ASSEMBLY
Flywheel: Removal - Refitting
K4M
10A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aPosition the vehicle on a two-post lift (see Vehicle:
Towing and lifting) (0

Page 117 of 652

RENAULT TWINGO RS 2009 2.G Engine And Peripherals Workshop Manual 10A-111
ENGINE AND CYLINDER BLOCK ASSEMBLY
Flywheel: Removal - Refitting
K4M
10A
-the flywheel.
REFITTING
I - REFITTING PREPARATION OPERATION
aUse SURFACE CLEANER  (see Vehicle: Parts 
and consumables

Page 118 of 652

RENAULT TWINGO RS 2009 2.G Engine And Peripherals Workshop Manual 11A-1
TOP AND FRONT OF ENGINE
Pressure at end of compression: Check
K4M
11A
CHECK
I - PREPARATION OPERATION FOR CHECK
aRemove:
-the coils (see 17A, Ignition, Coils: Removal - Re-
fitting, page 17A-1)

Page 119 of 652

RENAULT TWINGO RS 2009 2.G Engine And Peripherals Workshop Manual 11A-2
TOP AND FRONT OF ENGINE
Pressure at end of compression: Check
D4F
11A
CHECK
I - PREPARATION OPERATION FOR CHECK
aRemove the plugs (see 17A, Ignition, Plugs: Re-
moval - Refitting, page 17A-12) .

Page 120 of 652

RENAULT TWINGO RS 2009 2.G Engine And Peripherals Workshop Manual 11A-3
TOP AND FRONT OF ENGINE
Accessories belt: Removal - Refitting
D4F, and 772, and STANDARD HEATING – D7F, and STANDARD HEATING
11A
REMOVAL
I - REMOVAL PREPARATION OPERATION
aDisconnect the batte