19D-9
ENGINE MOUNTING
Left-hand suspended engine mounting: Removal - Refitting
K9K
19D
aTorque tighten the suspended engine mounting
shaft (105 N.m ) (8) .
aRefit the mounting on the suspended engine mount-
ing body.
aTorque tighten the mounting bolts on the sus-
pended engine mounting body (21 N.m).
aClip the clutch control pipe onto the mounting on the
suspended engine mounting body.
aRefit:
-the rubber pad on the suspended engine mounting,
-the suspended engine mounting shaft nut.
aTighten to torque:
-the bolts of the suspended mounting rubber
pad (62 N.m),
-the suspended engine mounting rubber pad
shaft nut (62 N.m).
aRefit a new electrical wiring clip on the left-hand sus-
pended engine mounting.
II - FINAL OPERATION
aRemove the (Mot. 1672).
aRefit:
-a new front bolt on the subframe,
-a new rear bolt on the subframe.
aTighten to torque:
-the front subframe bolt (62 N.m),-the rear subframe bolt (105 N.m).
aRefit:
-the diesel injection computer (see 13B, Diesel in-
jection, Diesel injection computer: Removal -
Refitting, page 13B-13) ,
-the battery tray (see Battery tray: Removal - Re-
fitting) (80A, Battery),
-the battery (see ) (80A, Battery).
130485
19D-11
ENGINE MOUNTING
Left-hand suspended engine mounting: Removal - Refitting
K4M
19D
II - REMOVAL OPERATION
aRemove:
-the suspended engine mounting shaft nut (4) ,
-the bolts (5) of the suspended engine mounting
rubber pad,
-the rubber pad on the suspended engine mounting,
-the bolts (6) from the suspended engine mounting
support on the body.
aMove aside the wiring from the suspended engine
mounting support on the body.
aRemove the suspended engine mounting support onthe body.
aUnclip the clutch pipe from the suspended engine
mounting support on the gearbox.
aRemove:
-the bolts (7) from the suspended engine mounting
support on the gearbox,
-the suspended engine mounting support on the
gearbox.
REFITTING
I - REFITTING OPERATION
aRefit the suspended engine mounting support on the
gearbox.
aTorque tighten the bolts of the suspended engine
mounting support on the gearbox (62 N.m).
aClip the clutch pipe onto the suspended engine
mounting support on the gearbox.
aRefit the suspended engine mounting support on the
body.
131760
120310
132372
