RENAULT TWINGO RS 2009 2.G Panelwork Workshop Manual

RENAULT TWINGO RS 2009 2.G Panelwork Workshop Manual https://www.carmanualsonline.info/img/7/1724/w960_1724-0.png RENAULT TWINGO RS 2009 2.G Panelwork Workshop Manual

Page 151 of 209

RENAULT TWINGO RS 2009 2.G Panelwork Workshop Manual 43A-14
SIDE UPPER STRUCTURE
Body side: Description
C44
43A
121245
WARNING
To avoid damaging the vehicles electric and electro-
nic components, the earths of any wiring harness
near the weld area must

Page 152 of 209

RENAULT TWINGO RS 2009 2.G Panelwork Workshop Manual 43A-15
SIDE UPPER STRUCTURE
Upper body: General description
43A
I - DESIGN OF THE STRUCTURAL COMPONENT
This is a basic part; its only function is that of an upper
body.II -  AREA TO BE CUT FOR PARTIAL

Page 153 of 209

RENAULT TWINGO RS 2009 2.G Panelwork Workshop Manual 43A-16
SIDE UPPER STRUCTURE
Upper body: General description
43A
Lines (4) , (5) and (6) on the drawing show a butt weld
by continuous EGW welding.
Weld (6) along the butt weld line.
132023

Page 154 of 209

RENAULT TWINGO RS 2009 2.G Panelwork Workshop Manual 43A-17
SIDE UPPER STRUCTURE
Upper body: Description
43A
To replace this part, also order the A-pillar insert (A) .
There is only one way of replacing this part:
-complete replacement.
I - COMPOSITION

Page 155 of 209

RENAULT TWINGO RS 2009 2.G Panelwork Workshop Manual 43A-18
SIDE UPPER STRUCTURE
Upper body: Description
43A
Section C III - POSITIONING OF LOCAL ELECTRICAL 
EARTHS
121003
Note:
For more detailed information on welded connec-
tions with three thicknesse

Page 156 of 209

RENAULT TWINGO RS 2009 2.G Panelwork Workshop Manual 44A-1
REAR UPPER STRUCTURE
Rear wing panel: General description
44A
I - AREA TO BE CUT FOR PARTIAL 
REPLACEMENT
Lines (3) , (4) and (5) in the drawing show the areas in
which it is possible to carry o

Page 157 of 209

RENAULT TWINGO RS 2009 2.G Panelwork Workshop Manual 44A-2
REAR UPPER STRUCTURE
Rear wing panel: Description
C44
44A
the options for replacing this part are as follows:
-partial replacement,
-complete replacement.
I - COMPOSITION OF THE SPARE PARTII -

Page 158 of 209

RENAULT TWINGO RS 2009 2.G Panelwork Workshop Manual 44A-3
REAR UPPER STRUCTURE
Rear wing panel: Description
C44
44A
Section A
Section BSection C
2 -  Complete replacement
121015
121005121014
121007
Note:
For more detailed information on welded connec-

Page 159 of 209

RENAULT TWINGO RS 2009 2.G Panelwork Workshop Manual 44A-4
REAR UPPER STRUCTURE
Rear wing panel: Description
C44
44A
III - POSITIONING OF LOCAL ELECTRICAL 
EARTHSIMPORTANT
If the mating faces of the parts to be welded are not
accessible, make EGW plug w

Page 160 of 209

RENAULT TWINGO RS 2009 2.G Panelwork Workshop Manual 44A-5
REAR UPPER STRUCTURE
Rear lights mounting: General description
44A
DESIGN OF THE STRUCTURAL COMPONENT
This is a basic part; its only function is that of a rear li-
ghts mounting.
If there are ot