RENAULT TWINGO RS 2009 2.G Panelwork Workshop Manual

RENAULT TWINGO RS 2009 2.G Panelwork Workshop Manual https://www.carmanualsonline.info/img/7/1724/w960_1724-0.png RENAULT TWINGO RS 2009 2.G Panelwork Workshop Manual

Page 191 of 209

RENAULT TWINGO RS 2009 2.G Panelwork Workshop Manual 45A-10
TOP OF BODY
Roof rear cross member: General description
45A
DESIGN OF THE STRUCTURAL COMPONENT
This is a basic part; its only function is that of roof rear
cross member as well as roof stiffene

Page 192 of 209

RENAULT TWINGO RS 2009 2.G Panelwork Workshop Manual 47A-1
SIDE OPENING ELEMENTS
Front side door: Removal - Refitting
47A
I - REMOVAL WITHOUT HINGES
1 -  REMOVAL PREPARATION OPERATION
aDisconnect the door wiring harness supply connec-
tor.
2 -  OPERATIO

Page 193 of 209

RENAULT TWINGO RS 2009 2.G Panelwork Workshop Manual 47A-2
SIDE OPENING ELEMENTS
Front side door: Removal - Refitting
47A
2 -  FINAL OPERATION
aConnect the wiring harness supply connector.
aRefit the front wing (see 42A, Front upper structu-
re, Front w

Page 194 of 209

RENAULT TWINGO RS 2009 2.G Panelwork Workshop Manual 47A-3
SIDE OPENING ELEMENTS
Front side door: Stripping - rebuilding
47A
STRIPPING
aThe order of the operations described below applies
specifically to replacing the door.
STRIPPING OPERATION FOR PART

Page 195 of 209

RENAULT TWINGO RS 2009 2.G Panelwork Workshop Manual 47A-4
SIDE OPENING ELEMENTS
Front side door: Stripping - rebuilding
47A
-the exterior door handle (see Exterior door han-
dle: Removal - Refitting) (MR 412, 51A, Side ope-
ning element mechanisms),
-t

Page 196 of 209

RENAULT TWINGO RS 2009 2.G Panelwork Workshop Manual 47A-5
SIDE OPENING ELEMENTS
Front side door: Adjustment
47A
ADJUSTMENT
aFor information on the front side door adjustment va-
lues (see Vehicle panel gaps: Adjustment value)
(MR 412, 01C, Vehicle body

Page 197 of 209

RENAULT TWINGO RS 2009 2.G Panelwork Workshop Manual 47A-6
SIDE OPENING ELEMENTS
Front side door: Adjustment
47A
I - ADJUSTING THE FLUSH FITTING WITH THE 
FRONT WING
aRemove the indexing bolts (7) .
aUndo the nuts (8) .aReplace the original indexing stu

Page 198 of 209

RENAULT TWINGO RS 2009 2.G Panelwork Workshop Manual 47A-7
SIDE OPENING ELEMENTS
Front side door: Adjustment
47A
aAdjust the flush fitting with the front wing.
aTighten the nuts (8) .
aRefit the nuts (7) .
II -  ADJUSTING THE PANEL GAPS WITH THE 
REAR W

Page 199 of 209

RENAULT TWINGO RS 2009 2.G Panelwork Workshop Manual 47A-8
SIDE OPENING ELEMENTS
Fuel filler flap cover: Removal - Refitting
47A
REMOVAL
OPERATION FOR REMOVAL OF PART 
CONCERNED
aPress (1) using a thin screwdriver.
aDetach the fuel tank flap cover.
REFI

Page 200 of 209

RENAULT TWINGO RS 2009 2.G Panelwork Workshop Manual 48A-1
NON-SIDE OPENING ELEMENTS
Bonnet: Removal - Refitting
48A
I - REMOVAL BY MEANS OF THE BONNET BOLTS
1 -  REMOVAL PREPARATION OPERATION
aDisconnect the pipe (1) .
aUnclip the pipe at (2) .
2 -  OP