brake Seat Alhambra 2005 User Guide

Instrument panel68
S Se
ea
at
t bbe
el
lt
t wwa
ar
rn
ni
in
ng
g lla
am
mp
p
The corresponding warning lamp is:
"FASTEN SEAT BELT".
This warning lamp (only in some countries) lights up for about 6
seconds when the ignition is switched on as a reminder to fasten
your seat belts.
If the seat belt is not fastened an acoustic signal will sound after
switching on the ignition which will stop after about 6 seconds or
when the seat belt is fastened.
⇒"Seat belts" chapter.K
Priority 2 (yellow symbols)
An acoustic signal will sound if a yellow symbol appears. The
symbol is an indication of danger. The function must be checked as
soon as possible. If there are several failures at the same time, the
symbols will appear consecutively for about 2 seconds.
I In
ns
su
uf
ff
fi
ic
ci
ie
en
nt
t ooi
il
l lle
ev
ve
el
l
The corresponding warning lamp is:
"CHECK OIL LEVEL".
If the symbol lights: stop vehicle and switch off engine! Check oil
level and, if necessary, add oil
⇒"Engine oil" chapter.D De
ef
fe
ec
ct
ti
iv
ve
e ooi
il
l gga
au
ug
ge
e
The corresponding warning lamp is:
"OIL SENSOR WORKSHOP!"
If the symbol flashes it probably means that the oil level sensor is
defective. Head immediately to a Technical Service Centre. You may
continue motoring, but you should check the oil level regularly, for
instance, every time you stop to fill up.
E En
ng
gi
in
ne
e ffa
ai
il
lu
ur
re
e
• • PPe
et
tr
ro
ol
l een
ng
gi
in
ne
e
• • DDi
ie
es
se
el
l een
ng
gi
in
ne
e
The corresponding warning lamp is:
"ENGINE FAILURE WORKSHOP".
If there was an electrical engine failure while driving the
corresponding warning lamp would light up (petrol engine) or flash
(diesel engine). The engine must be checked by a Technical Service
Centre immediately.
A An
nt
ti
i-
-b
bl
lo
oc
ck
k ssy
ys
st
te
em
m ((A
AB
BS
S)
)*
*
The corresponding warning sign is:
"ABS FAILURE".
A failure of the ABS system is indicated as follows:
I If
f tth
he
e AAB
BS
S wwa
ar
rn
ni
in
ng
g lla
am
mp
p lli
ig
gh
ht
ts
s sse
ep
pa
ar
ra
at
te
el
ly
y
you may brake the
vehicle with the normal brake system without ABS. Nevertheless,
contact a Technical Service Centre as soon as possible.
For more information on the EDS system
⇒page 164.

Seats and luggage compartment107
Safety FirstControls and equipment Tips and Maintenance Technical Data
A Ad
dj
ju
us
st
ti
in
ng
g sse
ea
at
t hhe
ei
ig
gh
ht
t*
* 5
Take weight off seat cushion and pull up lever. The whole seat
cushion moves upwards. To adjust the seat cushion downwards,
push seat downwards with body weight
⇒ fig. 89.
Coat hanger
You can remove the clothes hook fitted to the head restraint. To do
this you must first remove the head restraint
⇒"Headrestraints"chapter. You can then simply pull the hook off the rods of the head
restraint.
Toy bag
The toy bag, which is in the form of a rucksack, can be hung from
the head restraint of a seat. In this way, your child can always see
and reach his/her toys during the journey. It is thus also possible
to prevent the bag from being flung forwards if you have to brake
suddenly or are involved in an accident.
K
Fig. 90
Fig. 91
• • FFo
or
r ssa
af
fe
et
ty
y rre
ea
as
so
on
ns
s tth
he
e hhe
ei
ig
gh
ht
t oof
f tth
he
e ddr
ri
iv
ve
er
r’
’s
s sse
ea
at
t mmu
us
st
t oon
nl
ly
y bbe
e aad
dj
ju
us
st
te
ed
d
w wh
he
en
n tth
he
e vve
eh
hi
ic
cl
le
e iis
s sst
ta
at
ti
io
on
na
ar
ry
y.
.
• • BBe
e cca
ar
re
ef
fu
ul
l wwh
he
en
n aad
dj
ju
us
st
ti
in
ng
g tth
he
e sse
ea
at
t hhe
ei
ig
gh
ht
t!
! CCa
ar
re
el
le
es
ss
s aan
nd
d uun
nc
co
on
nt
tr
ro
ol
ll
le
ed
d
a ad
dj
ju
us
st
tm
me
en
nt
t cca
an
n cca
au
us
se
e iin
nj
ju
ur
ri
ie
es
s.
.
K
W WA
AR
RN
NI
IN
NG
G
B7M-1152
T Th
he
e ccl
lo
ot
th
he
es
s hho
oo
ok
k mmu
us
st
t nno
ot
t bbe
e ffi
it
tt
te
ed
d tto
o tth
he
e hhe
ea
ad
d rre
es
st
tr
ra
ai
in
nt
t oof
f aan
n iin
nt
te
eg
gr
ra
at
te
ed
d
c ch
hi
il
ld
d sse
ea
at
t.
.
K
W WA
AR
RN
NI
IN
NG
G
AL0-091

Seats and luggage compartment119
Safety FirstControls and equipment Tips and Maintenance Technical Data
P Pe
ed
da
al
l aar
re
ea
a
Pedals
T
Th
he
e mmo
ov
ve
em
me
en
nt
t oof
f tth
he
e ppe
ed
da
al
ls
s mmu
us
st
t nno
ot
t bbe
e rre
es
st
tr
ri
ic
ct
te
ed
d!
!
F Fo
or
r tth
hi
is
s rre
ea
as
so
on
n,
, ddo
o nno
ot
t llo
oc
ca
at
te
e aan
ny
y iit
te
em
ms
s iin
n tth
he
e ffo
oo
ot
tw
we
el
ll
l wwh
hi
ic
ch
h cco
ou
ul
ld
d
r ro
ol
ll
l oor
r ssl
li
id
de
e uun
nd
de
er
rn
ne
ea
at
th
h tth
he
e ppe
ed
da
al
ls
s.
.
Around the pedal area there should not be any foot mats or other
additional floor covering materials:
• In the case of defects on the brake system, a greater pedal travel
may be necessary.
• It should always be possible to depress the clutch and
accelerator pedals fully.
• All pedals must be able to return, unhindered, to their rest
positions.
For these reasons, the only foot mats which may be used are those
which leave the pedal area completely free and which are
prevented from slipping.
L Lu
ug
gg
ga
ag
ge
e cco
om
mp
pa
ar
rt
tm
me
en
nt
t/
/M
Me
es
sh
h ppa
ar
rt
ti
it
ti
io
on
n*
*
Mesh partition*
The mesh partition behind the last row of seats can be used to
store l li
ig
gh
ht
t
articles of luggage. The net prevents these articles from
Fig. 111
• • TTh
he
e sst
te
ee
er
ri
in
ng
g cco
ol
lu
um
mn
n mma
ay
y oon
nl
ly
y bbe
e aad
dj
ju
us
st
te
ed
d wwh
hi
il
ls
st
t tth
he
e vve
eh
hi
ic
cl
le
e sst
ta
at
ti
io
on
na
ar
ry
y.
.
• • FFo
or
r ssa
af
fe
et
ty
y rre
ea
as
so
on
ns
s,
, tth
he
e lle
ev
ve
er
r mmu
us
st
t aal
lw
wa
ay
ys
s bbe
e ffi
ir
rm
ml
ly
y ppr
re
es
ss
se
ed
d uup
p,
, sso
o tth
ha
at
t
t th
he
e ppo
os
si
it
ti
io
on
n oof
f tth
he
e sst
te
ee
er
ri
in
ng
g cco
ol
lu
um
mn
n ddo
oe
es
s nno
ot
t ssu
ud
dd
de
en
nl
ly
y cch
ha
an
ng
ge
e wwh
hi
il
ls
st
t tth
he
e
v ve
eh
hi
ic
cl
le
e iis
s iin
n mmo
ot
ti
io
on
n.
.
K
W WA
AR
RN
NI
IN
NG
G
N No
o iit
te
em
ms
s ssh
ho
ou
ul
ld
d bbe
e kke
ep
pt
t iin
n tth
he
e ffo
oo
ot
tw
we
el
ll
l aas
s tth
he
es
se
e cco
ou
ul
ld
d bbl
lo
oc
ck
k tth
he
e ppe
ed
da
al
ls
s iin
n
t th
he
e cca
as
se
e oof
f aa ssu
ud
dd
de
en
n bbr
ra
ak
ki
in
ng
g mma
an
no
oe
eu
uv
vr
re
e oor
r aac
cc
ci
id
de
en
nt
t.
.
Y Yo
ou
u wwo
ou
ul
ld
d nno
ot
t llo
on
ng
ge
er
r bbe
e aab
bl
le
e tto
o bbr
ra
ak
ke
e,
, cch
ha
an
ng
ge
e gge
ea
ar
r oor
r aac
cc
ce
el
le
er
ra
at
te
e.
.
K
W WA
AR
RN
NI
IN
NG
G
AL0-107


Seats and luggage compartment120
being thrown forward when brakes are applied suddenly or in an
accident.
The mesh partition can be r re
em
mo
ov
ve
ed
d
. To do this you must first
remove the securing hooks (see arrows).
In the interests of good handling ensure that the load (persons and
luggage) is distributed evenly. Heavy items should always be
carried as near to the rear axle as possible or better still, between
the axles.
• • YYo
ou
u mmu
us
st
t een
ns
su
ur
re
e tth
ha
at
t tth
he
e hhe
ea
at
ti
in
ng
g eel
le
em
me
en
nt
ts
s oof
f tth
he
e rre
ea
ar
r wwi
in
nd
do
ow
w
a ar
re
e nno
ot
t dde
es
st
tr
ro
oy
ye
ed
d bby
y iit
te
em
ms
s rru
ub
bb
bi
in
ng
g aag
ga
ai
in
ns
st
t tth
he
em
m.
.
• Stale air escapes through ventilation openings in the side trim of
the luggage compartment.
Therefore these openings must not be covered.
K
Lashing eyes*
The retaining bar for the detachable seat belts in the 3rd row of
seats (see arrow) and the floor seat anchorages can also be used
as lashing eyes for securing pieces of luggage.
The lashing eyes comply with the Standard DIN 75410.
K
L Lu
ug
gg
ga
ag
ge
e cco
om
mp
pa
ar
rt
tm
me
en
nt
t cco
ov
ve
er
r*
*
The cover can be used as a stowage area for articles of clothing.
N No
ot
te
e
Please note that the field of vision of the rear view mirror can be obstructed
by articles of clothing.
F Fu
ur
rt
th
he
er
rm
mo
or
re
e tth
he
e hhe
ea
at
ti
in
ng
g eel
le
em
me
en
nt
ts
s oof
f tth
he
e rre
ea
ar
r wwi
in
nd
ds
sc
cr
re
ee
en
n cco
ou
ul
ld
d bbe
e
d da
am
ma
ag
ge
ed
d bby
y aar
rt
ti
ic
cl
le
es
s rru
ub
bb
bi
in
ng
g aag
ga
ai
in
ns
st
t tth
he
em
m.
.
If large items of luggage are to be carried, the cover can be
removed.
K
B7M-046CFig. 112
• • FFo
or
r ssa
af
fe
et
ty
y rre
ea
as
so
on
ns
s,
, tth
he
e sse
ea
at
ts
s iin
n tth
he
e rre
ea
ar
r mma
ay
y oon
nl
ly
y bbe
e uus
se
ed
d oon
nc
ce
e tth
he
e
l lu
ug
gg
ga
ag
ge
e cco
om
mp
pa
ar
rt
tm
me
en
nt
t cco
ov
ve
er
r hha
as
s bbe
ee
en
n rre
em
mo
ov
ve
ed
d.
.
• • NNo
o hhe
ea
av
vy
y oor
r hha
ar
rd
d aar
rt
ti
ic
cl
le
es
s ssh
ho
ou
ul
ld
d bbe
e lle
ef
ft
t oon
n tth
he
e llu
ug
gg
ga
ag
ge
e cco
om
mp
pa
ar
rt
tm
me
en
nt
t
c co
ov
ve
er
r.
. TTh
he
ey
y aar
re
e nno
ot
t oon
nl
ly
y aa dda
an
ng
ge
er
r ddu
ur
ri
in
ng
g aa ssu
ud
dd
de
en
n bbr
ra
ak
ki
in
ng
g mma
an
no
oe
eu
uv
vr
re
e bbu
ut
t
c co
ou
ul
ld
d aal
ls
so
o dda
am
ma
ag
ge
e tth
he
e cco
ov
ve
er
r.
.
W
WA
AR
RN
NI
IN
NG
G

Driving144
situation, an e ec
co
on
no
om
my
y
, low-consumption, or a more “s sp
po
or
rt
ty
y
”
programme will be selected.
The programme is selected a au
ut
to
om
ma
at
ti
ic
ca
al
ll
ly
y
depending on the
movement of the accelerator pedal.
If the accelerator pedal is moved s sl
lo
ow
wl
ly
y
, or at a n no
or
rm
ma
al
l
rate, the
gearbox will shift into a higher gear earlier, and down into a lower
gear later to r re
ed
du
uc
ce
e ffu
ue
el
l cco
on
ns
su
um
mp
pt
ti
io
on
n
.
A more “s sp
po
or
rt
ty
y
” programme is selected when the accelerator pedal
movesf fa
as
st
t
. The pedal does not have to be depressed to the point
ofk ki
ic
ck
k-
-d
do
ow
wn
n
⇒page 146. In this mode, the gearbox will shift up
later to make full use of the engine power reserves.
The downward shift occurs at a higher rate of revolutions than in
the economy programmes.
The gear box is self adapting, and continuously selects the most
suitable gear programme. At the same time, the driver can also
make the gear box switch to a more “sporty” programme by
pressing the accelerator quickly. Depending on road speed, this
makes the gearbox shift down early into a lower gear for quicker
acceleration (for instance to overtake another vehicle), without
having to press the accelerator all the way down to the kick-down
position. After the gear box has shifted back up it returns to the
original programme, depending on your style of driving.
The gear box adapts the gear shifts for uphill and downhill
gradients. This prevents the gearbox from shifting up and down
unnecessarily on uphill gradients. On downhill gradients, the
gearbox shifts down into a lower gear when the driver presses the
brake pedal. This makes use of the braking effect of the engine
without having to change down manually.N No
ot
te
e
Depending on road resistance, for example when trailer towing or on uphill
stretches, a programme is automatically selected which provides more
power by shifting into a lower gear. This prevents frequent gear changes.
K
Selector lever lock
In positions “P P
” and “N N
” with the ignition switched on the selector
lever is locked. To move the selector lever out of these positions
the brake pedal must be depressed and the selector lever button
pushed-in. This prevents a gear being engaged inadvertently and
the vehicle unintentionally moving off.
A delay circuit prevents the selector lever from locking when it is
moved quickly past the “N N
” position (for instance from “R R
” to “D D
”).
This enables for example the vehicle to be “rocked” out of a
“bogged down” position. The shift lock only locks the selector
lever if it is left in the “N N
” position for more than about 1 second
without the brake pedal being depressed.
At speeds above 5 km/h the selector lever lock is automatically
switched-off in position “N N
”.
S Sa
af
fe
et
ty
y iin
nt
te
er
rl
lo
oc
ck
k ffo
or
r iig
gn
ni
it
ti
io
on
n kke
ey
y
The key can only be withdrawn with the ignition switched off and
the selector lever in position “P P
” (parking lock).
W Wh
he
en
n tth
he
e iig
gn
ni
it
ti
io
on
n kke
ey
y iis
s rre
em
mo
ov
ve
ed
d,
, tth
he
e sse
el
le
ec
ct
to
or
r lle
ev
ve
er
r iis
s llo
oc
ck
ke
ed
d iin
n
p po
os
si
it
ti
io
on
n PP.
.
K

Driving145
Safety FirstControls and equipment Tips and Maintenance Technical Data
Selector lever positions
In the combi-instrument there is a display that shows the selector
lever position currently selected.
P P –– PPa
ar
rk
ki
in
ng
g llo
oc
ck
k
The driving wheels are locked mechanically.
The parking lock may only be engaged when the vehicle is
stationary. Before moving the lever in or out of the “P P
” position thelock button in the selector lever handle must be pressed. Before
moving the selector lever out of the “P P
” position with the ignition
switched on, the brake pedal must also be depressed.
R R –– RRe
ev
ve
er
rs
se
e gge
ea
ar
r
The reverse gear should only be engaged when the vehicle is
stationary and with the engine idling. Before engaging the position
“R R
” from the positions ”P P
” or “N N
” the brake pedal must be
depressed and the lock button in the selector lever handle must
also be pressed.
The reversing lights come on then the selector lever is in the “R R
”
position with the ignition switched on.
N N –– NNe
eu
ut
tr
ra
al
l ((i
id
dl
li
in
ng
g ppo
os
si
it
ti
io
on
n)
)
To move the lever out of neutral when stationary or at speeds
below 5 km/h and with ignition switched on depress the brake
pedal and press the lock button in the selector lever handle.
D D –– NNo
or
rm
ma
al
l ddr
ri
iv
vi
in
ng
g ppo
os
si
it
ti
io
on
n
The four forward gears are shifted up and down automatically
depending upon engine load and road speed.
Under certain driving conditions it is advantageous to engage one
of the following described selector lever positions.
3 3 –– PPo
os
si
it
ti
io
on
n ffo
or
r ““h
hi
il
ll
ly
y”
” rre
eg
gi
io
on
ns
s
The 1 1s
st
t
, 2 2n
nd
d
and 3 3r
rd
d
gears are shifted up and down automatically
depending upon engine load, road speed and selected programme
(E or S). The 4 4t
th
h
gear is not engaged. This increases the engine
braking effect when the accelerator pedal is released.
Fig. 141
N Ne
ev
ve
er
r ssh
hi
if
ft
t sse
el
le
ec
ct
to
or
r lle
ev
ve
er
r tto
o ppo
os
si
it
ti
io
on
n ““R
R”
” oor
r ““P
P”
” wwh
hi
il
ls
st
t tth
he
e vve
eh
hi
ic
cl
le
e iis
s iin
n
m mo
ot
ti
io
on
n.
. TTh
he
e gge
ea
ar
rs
s cco
ou
ul
ld
d bbe
e dda
am
ma
ag
ge
ed
d –– rri
is
sk
k oof
f aac
cc
ci
id
de
en
nt
t!
!
W
WA
AR
RN
NI
IN
NG
G

6
7
8
1/min
x1000
0 20 4060
3050
Km/h
C
AL0-121

Driving147
Safety FirstControls and equipment Tips and Maintenance Technical Data
M Mo
ov
vi
in
ng
g oof
ff
f
Select driving range (R R
,D D
,3 3
,2 2
,1 1
).W Wa
ai
it
t uun
nt
ti
il
l tth
he
e gge
ea
ar
rb
bo
ox
x hha
as
s
s sh
hi
if
ft
te
ed
d aan
nd
d tth
he
e ppo
ow
we
er
r ffl
lo
ow
w iis
s mma
ad
de
e tto
o tth
he
e ddr
ri
iv
vi
in
ng
g wwh
he
ee
el
ls
s
(light
selection jerk perceptible). T Th
he
en
n oon
ne
e cca
an
n aac
cc
ce
el
le
er
ra
at
te
e
.
S St
to
op
pp
pi
in
ng
g
When the vehicle is stopped for a short period, for example at
trafficlights, it is only necessary to apply the brakes. It is not
necessary to move selector lever to “N N
”. The engine should
however only be running at idling speed.P Pa
ar
rk
ki
in
ng
g
O On
n aa ggr
ra
ad
di
ie
en
nt
t tth
he
e hha
an
nd
db
br
ra
ak
ke
e ssh
ho
ou
ul
ld
d bbe
e aap
pp
pl
li
ie
ed
d ffi
ir
rm
ml
ly
y ffi
ir
rs
st
t aan
nd
d
t th
he
en
n tth
he
e ppa
ar
rk
ki
in
ng
g llo
oc
ck
k een
ng
ga
ag
ge
ed
d.
. TTh
hi
is
s wwi
il
ll
l een
ns
su
ur
re
e tth
ha
at
t tth
he
e llo
oc
ck
ki
in
ng
g
m me
ec
ch
ha
an
ni
is
sm
m iis
s nno
ot
t tto
oo
o hhe
ea
av
vi
il
ly
y llo
oa
ad
de
ed
d aan
nd
d mma
ak
ke
es
s tth
he
e llo
oc
ck
k eea
as
si
ie
er
r tto
o
d di
is
se
en
ng
ga
ag
ge
e.
.
T To
ow
w sst
ta
ar
rt
ti
in
ng
g
On vehicles with automatic gearbox the engine cannot be started
by towing or pushing the vehicle
⇒"Tow starting" chapter.
When the battery is flat, the engine can be started from the battery
of another vehicle by using jumper cables
⇒“Emergency starting”.
T To
ow
wi
in
ng
g
If the car has to be towed at any time, you must necessarily follow
the instructions
⇒"Tow starting" chapter.K
i in
n nno
ot
t ffu
ul
ll
ly
y iin
nt
te
er
rr
ru
up
pt
te
ed
d eev
ve
en
n aat
t iid
dl
li
in
ng
g ssp
pe
ee
ed
d –– aan
nd
d tth
he
e vve
eh
hi
ic
cl
le
e tte
en
nd
ds
s tto
o
“ “c
cr
re
ee
ep
p”
”.
.
W Wh
he
en
n tth
he
e vve
eh
hi
ic
cl
le
e iis
s sst
ta
at
ti
io
on
na
ar
ry
y aan
nd
d aa gge
ea
ar
r iis
s een
ng
ga
ag
ge
ed
d,
, tth
he
e tth
hr
ro
ot
tt
tl
le
e mmu
us
st
t nno
ot
t
b be
e oop
pe
en
ne
ed
d iin
na
ad
dv
ve
er
rt
te
en
nt
tl
ly
y oon
n aan
ny
y aac
cc
co
ou
un
nt
t ((f
fo
or
r iin
ns
st
ta
an
nc
ce
e bby
y hha
an
nd
d ffr
ro
om
m tth
he
e
e en
ng
gi
in
ne
e cco
om
mp
pa
ar
rt
tm
me
en
nt
t)
).
. OOt
th
he
er
rw
wi
is
se
e tth
he
e vve
eh
hi
ic
cl
le
e wwi
il
ll
l mmo
ov
ve
e iim
mm
me
ed
di
ia
at
te
el
ly
y –– eev
ve
en
n
i if
f tth
he
e hha
an
nd
d bbr
ra
ak
ke
e hha
as
s bbe
ee
en
n ffu
ul
ll
ly
y aap
pp
pl
li
ie
ed
d.
.
B Be
ef
fo
or
re
e wwo
or
rk
ki
in
ng
g oon
n tth
he
e vve
eh
hi
ic
cl
le
e wwi
it
th
h tth
he
e een
ng
gi
in
ne
e rru
un
nn
ni
in
ng
g,
, aap
pp
pl
ly
y tth
he
e
h ha
an
nd
db
br
ra
ak
ke
e aan
nd
d ppu
ut
t tth
he
e sse
el
le
ec
ct
to
or
r lle
ev
ve
er
r iin
n ““P
P”
”.
.
W
WA
AR
RN
NI
IN
NG
G ((c
co
on
nt
ti
in
nu
ue
ed
d)
)
T To
o ppr
re
ev
ve
en
nt
t tth
he
e vve
eh
hi
ic
cl
le
e rro
ol
ll
li
in
ng
g aaw
wa
ay
y iin
na
ad
dv
ve
er
rt
te
en
nt
tl
ly
y,
, yyo
ou
u ssh
ho
ou
ul
ld
d aal
lw
wa
ay
ys
s aap
pp
pl
ly
y
t th
he
e hha
an
nd
db
br
ra
ak
ke
e ffi
ir
rm
ml
ly
y wwh
he
en
n tth
he
e vve
eh
hi
ic
cl
le
e hha
as
s cco
om
me
e tto
o tth
he
e cco
om
mp
pl
le
et
te
e sst
to
op
p.
. AAl
ls
so
o
p pl
la
ac
ce
e tth
he
e gge
ea
ar
r sse
el
le
ec
ct
to
or
r lle
ev
ve
er
r iin
n ppo
os
si
it
ti
io
on
n ““P
P”
”.
.
W
WA
AR
RN
NI
IN
NG
G

Driving149
Safety FirstControls and equipment Tips and Maintenance Technical Data
A Au
ut
to
om
ma
at
ti
ic
c gge
ea
ar
r llo
oc
ck
k
When the ignition is switched on the selector lever is locked in the
positions "P P
" and "N N
".
To unlock press the brakes. This way, you will prevent involuntary
shifting of gears and moving of the vehicle.
When the selector lever is in the positions "P P
" and "N N
" the driver
will see a display on the digital screen of the instrument panel with
the message "PRESS BRAKES TO SHIFT GEAR WHILE CAR
STATIONARY". Furthermore, the shift area will display the symbol
which appeared earlier.
The selector lever lock is automatically unlocked in the "N N
" position
if the speed of 5 km/h is exceeded.
L Lo
oc
ck
k bbu
ut
tt
to
on
n
The lock button for the selector lever prevents the involuntary shift
of gears. By pressing this button the lever is unlocked.
The fig. 144shows the positions in which the button in the lever
must be pressed.
L Lo
oc
ck
k ffo
or
r rre
em
mo
ov
va
al
l oof
f iig
gn
ni
it
ti
io
on
n kke
ey
y
Once the ignition is switched on the key can only be removed if the
lever is in the position "P P
" (parking lock).
O On
nc
ce
e tth
he
e kke
ey
y iis
s rre
em
mo
ov
ve
ed
d tth
he
e sse
el
le
ec
ct
to
or
r lle
ev
ve
er
r rre
em
ma
ai
in
ns
s llo
oc
ck
ke
ed
d iin
n tth
he
e
p po
os
si
it
ti
io
on
n ""P
P"
".
.
K
H
Ha
an
nd
db
br
ra
ak
ke
e
Using the handbrake
To apply the handbrake pull lever up firmly. On hills the 1st gear or
with automaticgearbox the parking lock should also be engaged.
The handbrake should always be applied so firmly that it is not
possible to drive inadvertently with the handbrake on.
When handbrake is applied with the ignition on, the brake warning
lamp comes on.
To release handbrake, pull lever up slightly, press locking knob
(arrow) in and push lever right down.
Fig. 145TO8-029


Driving151
Safety FirstControls and equipment Tips and Maintenance Technical Data
F Fo
or
r aal
ll
l vve
eh
hi
ic
cl
le
es
s:
:
• • PPo
os
si
it
ti
io
on
n
1
To lock the steering wheel withdraw the key and turn the wheel
until you hear the pin engage.
In vehicles with automatic gearbox the key can only be turned to
position
1and withdrawn when the selector lever is in the “P P
”
position.
• P Po
os
si
it
ti
io
on
n
2
If the key is difficult to turn in the lock, move the steering wheel
until the key turns freely.
• • PPo
os
si
it
ti
io
on
n
3
Before the starter can be operated a second time the key must be
turned back to position 1. This prevents the starter motor from
engaging while the engine is running, as this could damage the
starter.
K
Ignition key lock*
On vehicles with an automatic gearbox* after switching off the
ignition the ignition key can only be withdrawn if the selector lever
is in the “P P
” position.When the ignition key has been withdrawn the selector lever is
locked in this position.
K
S St
ta
ar
rt
ti
in
ng
g tth
he
e een
ng
gi
in
ne
e
General notes
• Before starting, move gear lever to neutral (with automatic
gearbox, selector lever in “P P
” or “N N
” position) and apply handbrake
firmly.
• On vehicles with a manual gearbox depress the clutch pedal
when operating starter so that starter only has to turn engine.
• As soon as engine starts, release the ignition key so that starter
can disengage.
• After starting a cold engine it may sound noisy for a moment or
two because the oil pressure has to build up in the hydraulic
tappets first. This is normal and no cause for alarm.

O On
n vve
eh
hi
ic
cl
le
es
s wwi
it
th
h mma
an
nu
ua
al
l gge
ea
ar
rb
bo
ox
x,
, nne
ev
ve
er
r rre
em
mo
ov
ve
e tth
he
e kke
ey
y ffr
ro
om
m tth
he
e sst
te
ee
er
ri
in
ng
g
l lo
oc
ck
k wwh
hi
il
le
e tth
he
e vve
eh
hi
ic
cl
le
e iis
s mmo
ov
vi
in
ng
g.
. OOt
th
he
er
rw
wi
is
se
e tth
he
e sst
te
ee
er
ri
in
ng
g wwh
he
ee
el
l mma
ay
y llo
oc
ck
k
u un
ne
ex
xp
pe
ec
ct
te
ed
dl
ly
y.
.
W
WA
AR
RN
NI
IN
NG
G
W Wh
he
en
n rru
un
nn
ni
in
ng
g tth
he
e een
ng
gi
in
ne
e iin
n cco
on
nf
fi
in
ne
ed
d ssp
pa
ac
ce
es
s tth
he
er
re
e iis
s aa dda
an
ng
ge
er
r oof
f
p po
oi
is
so
on
ni
in
ng
g.
.
W
WA
AR
RN
NI
IN
NG
G

Driving155
Safety FirstControls and equipment Tips and Maintenance Technical Data
This however, is not the case when the stored speed is exceeded
by more than 10 km/h for a period of more than 5 minutes. The
speed must then be stored again.
Altering stored speed
R Re
ed
du
uc
ci
in
ng
g/
/s
se
et
tt
ti
in
ng
g
The stored speed can be reduced by pressing button
⇒ fig. 147B.
By pressing button
⇒ fig. 147Bbriefly, the stored speed is
reduced by a preset amount. If you pres and hold the button, the
speed will decrease through automatic deceleration. The speed
reached when reducing the button will be stored.
If the button is released at a speed of less than approx. 30 km/h,
the memory is deleted. The speed must then, if necessary, be reset
using button
⇒ fig. 147Bafter the vehicle has accelerated to a
speed higher than approx. 30 km/h.
A Ac
cc
ce
el
le
er
ra
at
ti
in
ng
g/
/s
st
to
or
ri
in
ng
g
The stored speed can be increased without depressing the
accelerator by moving the slide control
⇒ fig. 147Ato R RE
ES
S
.
By briefly pressing the slide control, the speed is increased by a
preset amount. If the switch is moved to the left and held, thespeed is increased through automatic acceleration. The speed
reached when the switch is released is then saved.
K
Switching system off temporarily
V Ve
eh
hi
ic
cl
le
es
s wwi
it
th
h mma
an
nu
ua
al
l gge
ea
ar
rb
bo
ox
x:
:
T Th
he
e ssy
ys
st
te
em
m iis
s tte
em
mp
po
or
ra
ar
ri
il
ly
y ssw
wi
it
tc
ch
he
ed
d oof
ff
f
when the brake or clutch
pedals are used or when the switch
Ais moved to OFF (not
engaged).
The speed stored at this time will remain in the memory.
To r re
es
su
um
me
e
the previously stored speed push switch
Afully to the
left after the brake or clutch pedals are released.
T Th
he
e ppr
ro
og
gr
ra
am
mm
me
ed
d ssp
pe
ee
ed
d mmu
us
st
t oon
nl
ly
y bbe
e rre
es
su
um
me
ed
d wwh
he
en
n iit
t iis
s nno
ot
t tto
oo
o hhi
ig
gh
h ffo
or
r
t th
he
e eex
xi
is
st
ti
in
ng
g ttr
ra
af
ff
fi
ic
c cco
on
nd
di
it
ti
io
on
ns
s!
!
K
W WA
AR
RN
NI
IN
NG
G
BA
B8L-068Fig. 148