technical data SKODA YETI 2009 1.G / 5L Owners Manual
[x] Cancel search | Manufacturer: SKODA, Model Year: 2009, Model line: YETI, Model: SKODA YETI 2009 1.G / 5LPages: 271, PDF Size: 16.24 MB
Page 182 of 271

Driving and the Environment
181
Using the system
Safety
Driving Tips
General Maintenance
Breakdown assistance
Technical Data
WARNING
•
In the event of a vehicle rollover, an occupant of the vehicle who is not
wearing a seat belt is exposed to a clearl
y higher risk of injury compared to an
occupant who is wearing a seat belt.•
Luggage and other items, which are transp
orted on the roof of the vehicle,
additionally raise the centre of gravity and thus increase the risk of a rollover.•
Avoid driving at an
angle on a hillside
⇒page 186.
•
Observe the important guidelines
⇒page 180.
Important informationOff-road driving is not suitable for everyone. Small children, expectant mothers and elderly or physically disabled persons are part
icularly at risk if the ride is rough and
help is far away. The first priority
should always be
safety
.
Never overestimate your own
capabilities and never underestimate the difficulties of
driving off-road. We cannot discuss all the possible driving situations in this manual, because there are so many types of terrains which may hide different risks and dangers. The examples listed in this manual are general rules for
safe off-road driving. It is however not
possible to predict if these rules are valid for all the situations which may occur. Before driving through unknown terrain, it is ther
efore important that you know what lies
ahead of you. This way you can estima
te any possible danger in advance.
For the sake of the environment
When driving off-road, show respect and
appreciation for the environment and its
preservation for future generations.Before driving off-road for the first timeBefore driving off-road, we recommend that
you take part in an Off-road driver
training course. This is especial
l y i m p o r t a n t i f y o u h a v e l i t t l e o r n o e x p e r i e n c e o f d r i v i n g
off-road. In a driver training
course, you learn how to use th
e vehicle in many different
off-road situations and how to handle the
vehicle safely when driving through rough
terrain. Driving off-road requires entirely different skills from the driver and a very different behaviour than driving on the road. Your pers
onal safety and that of your passengers
depend on you, your capabili
ties and your cautiousness.
Do not drive off-road where it is not suitable for your vehicle or where the demands on you are too high. Although your vehicle
can handle off-road driving, it is not
designed for travels with expedition characteristics. Before each journey off-road, make sure th
at the vehicle is appr
opriately equipped for
the planned journey
⇒page 182. The standard equipment of your vehicle may not be
sufficient for your journey. With the standa
rd tyres you can drive with your off-road
vehicle through easy terrain, such as flat forest roads, meadows and fields. Please note however, that driving the vehicle on a diffic
ult, muddy and sandy gr
ound is restricted
and that the traction of the standard tyres is
reduced when driving off-road. If you have
planned prolonged or difficult
off-road trips, we reco
mmend that you equip your
vehicle with suitable off-road tyres.
WARNING
Observe the important guidelines
⇒page 180.
Rules of conduct for responsible off-road drivingObserve the valid national legal requirements when driving off-road.
sgg.6.book Page 181 Thursday, September 24, 2009 2:32 PM
Page 183 of 271

Driving and the Environment
182
Explanation of technical termsFig. 163 Embankment angle / slope angle Fig. 164 Ground clearance / ramp angleThe technical data
⇒page 245, “Angle (in degree)” refer to ideal conditions. These
values may differ depending on the load an
d composition of the soil and the environ-
ment. The driver is responsible to decide whether a vehicle can overcome a certain situation. Embankment angle (front and rear) Transition from the horizontal plane to an
upward slope or from a downward slope
back to the plane. The angle indication determines the angle at which you can drive the vehicle down the embankment, at a slow speed, without the bumper or the under-body of the vehicle touching the ground. Slope angle The difference of altitude (upward slope) which is overcome on a stretch of road of 100 m, is indicated in percentage or degrees, i.e. the gradiant at which the vehicle can climb
a hill on its own (among other things, depe
nding on the road surface and the engine
power). Ground clearance The distance between the road surface and the deepest point of the vehicle under- body. Ramp angle The angle indication determines the angle
at which you can driv
e the vehicle over a
ramp, at a slow speed, without the underbody of the vehicle touching the ramp edge.
WARNING
When exceeding the maximum value given in the table
⇒page 245, “Angle (in
degree)”, this can result in serious injuries and/or vehicle damage. All of the data was determined on flat, firm and non-slip road surfaces as well as under dry weather conditions. There are no id
eal off-road conditions. Therefore,
never completely go according to th
e maximum values, but always leave a
safety margin.Useful utensilsMany items can be very useful wh
en driving off-road, for example:
•
compass and maps,
•
torch and spare batteries,
•
mobile phone or CB radio,
•
tow bar or tow rope with sufficient tear strength,
•
electrically driven tyre pump for connect
ing to the 12-volt power outlet of the
vehicle,•
a blanket and rubber boots,
•
snow chains,
•
a timber plank which is approximately 4 cm thick and about 1 metre long can be
used as a traction aid when the vehicle is stuck or as a base for the lifting jack,•
additional tools and a folding
yardstick or a measuring tape,
•
spare wheel and tyre repair kit,
AA
AB
AC
AD
sgg.6.book Page 182 Thursday, September 24, 2009 2:32 PM
Page 184 of 271

Driving and the Environment
183
Using the system
Safety
Driving Tips
General Maintenance
Breakdown assistance
Technical Data
•
shovel.
Safe off-road drivingAdopt a correct seated position and always fa
sten the seat belt correctly. Make sure
that your front passenger and your passengers
seated on the rear seats always fasten
their seat belts correctly. When driving off-road, it is perhaps more useful to adopt a slightly different seated position. Depending on the terrain, an incr
eased force may be required to turn the
steering wheel because the force is transferred from the front wheels to the steering wheel. You must be seated in such a way that you have good front visibility, especially when driving uphill or dow
nhill. You must never be seat
ed in such a way that the
distance between your chest and the midd
le of the airbag cover is less than
25 cm
⇒ page 148. Under no circumstances must you drive off-ro
ad with high heels,
slippery or open
shoes. You should wear shoes which fit your fe
et well and allow you to get a feel for the
pedals.
WARNING
Observe the important guidelines
⇒page 180.
Before driving off-road•
Make sure the tyres are suitable for the planned off-road journey. Before you drive
through difficult terrai
n, equip your vehicle with off-road tyres.
•
Fill up your tank. The fuel consumption of
the vehicle is much higher when driving
off-road than when driving on the road.•
Install the towing eye at the front or at the rear before driving off-road. It is not
always possible to install the towing eye if the vehicle got stuck.•
Always check the inflation pressure of a
ll the tyres and if necessary correct it.
•
Check the vehicle tool kit and suppl
ement it according to your needs.
•
Fill with engine oil up to the line , so that the engine is sufficiently supplied with
engine oil when the vehicle is in a tilted position
⇒page 205, “Check engine oil level”.
•
Top up wash fluid.
•
Stow your load as low as possible in the vehicle and attach all the items which are
loose.Off-road driving•
Never be alone when driving off-road and be prepared to encounter unexpected
situations. Travel together with at least two off-road vehicles. Equipment with which you can call for help in an em
ergency is partic
ularly useful.
•
Drive slowly through unclear terrain.
•
You must stop when encountering difficul
t passages and explore the continuation
of the route on foot. If you cannot go on or
if you doubt the safety of the route, turn
back and choose another way.•
Drive slowly over hilltops. Make sure that
the wheels of the vehicle do not lift off
the ground, as this could severely damage
the vehicle and it may become disabled.
•
Drive slowly on difficult stretches of the route. When driving on a slippery ground,
shift up into the next higher gear and make
sure that the vehicle always stays in motion.
Do not drive too fast so that you don't lose control over your vehicle.•
If your vehicle got stuck in
sand, snow or sludge, it may be more effective to reverse
the vehicle than trying to drive forwards.•
Place stones, footmats or pieces of wood
under the spinning wheels in order to
achieve traction on a sandy or slippery ground.•
Do no drive through water before reading what you must take into account
⇒ page 179.•
Keep sufficient distance from other vehicles even at low speeds. When the first
vehicle suddenly gets stuck, the following vehi
cle can still stop in time without getting
stuck itself.•
Do not plan day trips which are too far in distance.
•
Do not use the cruise control system when
driving off-road. It is only intended for
driving on the road.
WARNING
•
The intelligent engineering of your ve
hicle cannot overco
me the physical
limits of your vehicle.
AA
sgg.6.book Page 183 Thursday, September 24, 2009 2:32 PM
Page 186 of 271

Driving and the Environment
185
Using the system
Safety
Driving Tips
General Maintenance
Breakdown assistance
Technical Data
–Switch on the Off-road mode
⇒page 170.
– Drive at walking speed over rocky passages. – If it is not possible to drive around a ston
e, gently drive onto
the stone with one of
the front wheels and then drive over it slowly.
WARNING
Observe the important guidelines
⇒page 180.
Caution
•
On no account drive over large objects (suc
h as pieces of rock
or tree stumps),
neither in the middle nor on one side. When driving over objects which are larger than the ground clearance, the chassis and its
components can get da
maged. Your vehicle
could break down far away from any assistance.•
Even objects that are smaller than the ex
isting ground clearance can come into
contact with the underbody of the vehicle an
d can lead to damage or failure of the
vehicle. This applies especially when there is
a hollow or soft ground in front or behind
the object or if you drive too fast over th
e object and thus the vehicle is deflected.
For the sake of the environment
Leaking engine oil and brake fluid pollute the environment and contaminate the bodies of water. The dispos
al e.g. of engine oil soaked soil can be costly.
Crossing bodies of waterParticular attention is required wh
en driving through bodies of water
⇒page 179.
Driving through snow-covered terrain– Before you drive through snow-covered te
rrain, mount snow chains on the front
wheels or on the rear wheels
⇒page 219, “Snow chains” in order to achieve the
best possible traction.
–Switch on the Off-road mode
⇒page 170.
Even harmless looking sections of terrain can be dangerous. This applies in particular for sections where no ruts or other tracks are visible.
WARNING
•
Driving through snow-covered terrain poses special dangers. Never choose
a dangerous route and never take a risk which could jeopardize your safety and that of your passengers. If you cannot go on or if you doubt the safety of the route, turn back and choose another way.•
Potholes, troughs, trenches, precipices,
sheets of ice or other obstructions
are often completely or partially obscured by snow.•
The hidden dangers of snow can cause an accident, serious injuries or your
vehicle to break down under
extreme weather conditions.
Driving over steep terrainDriving uphill and downhill– Stop the vehicle before driving uphill or
downhill, exit the vehicle and explore the
situation.
– Walk a stretch and check the firmness of the soil and look for obstructions or other
hidden dangers.
– Check how the route continues beyond the slope. – Switch on the Off-road mode
⇒page 170.
– Drive slowly and steadily straight uphill or downhill.– Do not stop the vehicle on a hillside or attempt to turn around. – You must prevent the engine from cutting out.Driving uphill– Check before driving over a hilltop, how it
continues on the other side. If you drive
up a steep hill, the vehicle faces the sky and you cannot see what is directly in front of the vehicle.
– Switch on the Off-road mode
⇒page 170.
sgg.6.book Page 185 Thursday, September 24, 2009 2:32 PM
Page 188 of 271

Driving and the Environment
187
Using the system
Safety
Driving Tips
General Maintenance
Breakdown assistance
Technical Data
roof should be removed and secured, as the
vehicle could tilt by
a sudden shifting of
the luggage. A passenger, seated at the rear, should always
remain seated on the seat facing up the
hill during such a journey. In an extreme ca
se, the passenger on the relevant side must
exit the vehicle until you have
safely crossed the hillside.
Exiting the vehicle on a hillside If the vehicle comes to a standstill at a steep angle on a hillside and you and your passengers must exit the vehicle, then all th
e occupants should exit on the side facing
up the hill
⇒page 186, fig. 166
on the right.
WARNING
•
Never attempt to drive uphill or downhill if it is too steep for your vehicle.
The vehicle could slip, tilt or roll over - risk of accident!•
When driving at an angle on a hillside,
the vehicle can lose its grip and slide
sideways. The vehicle can tilt or roll over
and then roll down the hillside. This
can lead to serious injuries.•
Always make sure that when the vehicle
is at an angle, the wheels on the low
side do not sink deeply into the ground or into troughs and do not drive over stones, tree stumps or other obstructions
with the alternate ra
ised wheels - risk
of accident!•
Before you drive at an angle on a hillside
⇒page 186, fig. 166
, make sure
that you can steer and maintain your trajectory. If this is not possible, choose a different path. If you drive at an angle
on a hillside and there is a risk your
vehicle may tilt, steer imme
diately downhill on your trajectory and lightly
depress the accelerator.•
If the vehicle is stationary on a hillside
with a too great angle of lateral incli-
nation, avoid sudden and uncontrolled movements in the vehicle. The vehicle can roll over and then roll down the hillside. This can lead to serious injuries.•
If the vehicle is stationary on a hillside
with a too great angle of lateral incli-
nation, neither you nor your occupants must exit the vehicle through the doors facing downhill. This can lead to a shift of the overall centre of gravity. The vehicle can tilt or roll over and then roll down the hillside. This can lead to serious injuries. To avoid this, you and your occupants must exit the vehicle only on the side facing uphill
⇒page 186, fig. 166
.
•
When you exit the vehicle, make sure
that the door which faces uphill does
not close by its own weight or by carelessness - risk of injury!•
Observe the important guidelines
⇒page 180.
Driving over rutted roads and troughsYou will always encounter ruts when drivin
g on forest roads, through wet meadows
and fields as well as on rutted stretches of terrain. If the ruts and troughs are on firm and soft ground, you can simply follow the ruts.Do not drive over ruts and troughs which are
too deep. If you cannot avoid this, it is
better that you turn back.
Caution
If the ruts or troughs become too deep,
the underbody of the vehicle can touch the
ground, which might cause the
underbody to get damaged. Therefore, avoid driving in
deep ruts and troughs.Crossing a trenchIf possible, drive through the trench at an acute angle. Make sure when driving through the trench that the tilt angle is not too steep.
WARNING
Never attempt to drive through a trench if its embankment is too steep. The vehicle could slip, tilt or roll over - risk of accident!
Caution
If you drive into the trench at a right angle,
the front wheels will sink into the trench.
There is also the danger that the underbod
y of the vehicle touches the ground and is
damaged. For these reasons (even with four-wheel drive) it is rarely possible to get out of the trench.
WARNING (continued)
sgg.6.book Page 187 Thursday, September 24, 2009 2:32 PM
Page 190 of 271

Driving and the Environment
189
Using the system
Safety
Driving Tips
General Maintenance
Breakdown assistance
Technical Data
After driving off-roadCheck the vehicle for damage after driving off-road - especially on the underside of the vehicle. – Switch off the Off-road mode
⇒page 170.
– Check the tyres and the axles for damage and remove coarse dirt, stones and
foreign bodies from the tyre tread.
– Clean the turn signal lights, the headlights, the number plate and the windows. – Check the underbody of the vehicle and re
move trapped objects, such as scrub or
wood pieces.
– Contact your specialist gara
ge if you detect any damage.
– In case of thick layers of
dirt, clean the radiator grille, the engine compartment and
the underbody of the vehicle.
WARNING
•
Combustible materials which are trapped under the vehicle floor can be
dangerous. They can impair the driving
safety and the safety of all the occu-
pants of the vehicle. After driving off-
road, always check the underside of the
vehicle and remove trapped objects.•
Never continue the journey if objects
are trapped under the vehicle. This
can damage the fuel lines, the brake sy
stem, the seals and other parts of the
chassis.•
Combustible objects such as dry leaves or twigs could ignite on hot vehicle
parts. A vehicle fire can also lead to serious injuries.•
Observe the important guidelines
⇒page 180.
sgg.6.book Page 189 Thursday, September 24, 2009 2:32 PM
Page 191 of 271

Towing a trailer
190
Towing a trailerTo w i n g a t r a i l e rTechnical requirements The towing device must satisfy certain technical requirements.Your vehicle is designed primarily for tr
ansporting persons and luggage. It can,
however, also be used for towing a traile
r - provided certain technical equipment is
fitted. If your vehicle has already been supplied with a
factory-fitted
towing device then
everything that is nece
ssary for towing a trailer in technical terms, and in terms of the
law, has already been taken into account. Your vehicle is fitted with a 13-pin power so
cket for the electrical connection between
the vehicle and trailer. If the tr
ailer which you wish to tow has a
7-pin connector
, you
can use a suitable adapter
14) from Škoda original accessories.
This work must be carried out in accordance
with the manufacturer's specifications if
a towing device is retrofitted. Authorised Škoda Service Partners are familiar with details relating to retrofitting a towing device and for any necessary
modifications to the cooling system.
WARNING
We recommend that you have the towing device from Škoda original accesso- ries installed by an authorised Škoda Serv
ice Partner. He is familiar with all the
relevant details relating to retrofitting such equipment. There is a risk of an accident if the towing device is not properly fitted!
General Maintenance There are a number of points to pay attention to when towing a trailer.Trailer load The permissible trailer load must on no account be exceeded. You can negotiate appropriately steeper inclin
es and descents if you do not make full
use of the permissible trailer load. The trailer loads specified only apply for
altitudes
up to 1 000 metres above mean sea
level. The fact that the engi
ne power output drops with increasing height due to a
lowering of air pressure and thus the abil
ity to climb, means that the towed weight
must be reduced by 10% for every further increase of 1 000 metres in height above sea level. The towed weight is the weight of the (laden) vehicle and the (laden) trailer together. One should take this into account
before driving up to higher altitudes.
The trailer and drawbar load information on the type plate of the towing device are merely test data for the towing device. The data relating to your vehicle, which is often less than this test data, can be found in your vehicle registration documents. Distribution of the load Distribute the load in the trailer in such a
way that any heavy items are located as close
as possible to the axle. Secure th
e items to preven
t them slipping.
Tyre pressure Correct the tyre inflation pressure on yo
ur vehicle for that of “fully laden”,
⇒page 215.
The inflation pressure of the tyres fitted to
the trailer adjust in accordance with the
manufacturer's recommendation. Exterior mirrors You have to have additional ex
terior mirrors fitted if you are not able to see the traffic
behind the trailer with the standard rear-view mirrors. Both exterior mirrors should be attached to folding arms. Adjust the mirrors so that they provide you with an adequate field of view to the rear.
14)In some countries the adapter is supplied with the towing device.sgg.6.book Page 190 Thursday, September 24, 2009 2:32 PM
Page 192 of 271

Towing a trailer
191
Using the system
Safety
Driving Tips
General Maintenance
Breakdown assistance
Technical Data
Headlights Before starting off with a hitched trailer, also check the setting of the headlights. Alter the setting as necessary with the ai
d of the headlight beam adjuster
⇒page 58.
Detachable ball head The ball rod is detachable on vehicles which
feature a factory-fitted
towing device. It is
stowed together with separate fitting instru
ctions in the spare wheel well in the luggage
compartment of the vehicle. Further information on the towing device
⇒page 192.
Note
•
We recommend that you also have your
vehicle inspected between service inter-
vals if you tow a trailer frequently.•
The handbrake on the towing vehicle must be put on when coupling and decou-
pling the trailer.Driving Tips Particular caution is required when towing a trailer.– Do not, as far as possible, drive with
your vehicle unladen and the trailer laden.
– Do not make full use of the legal maximum speeds. This applies in particular to
downhill sections.
– Apply the brakes in good time. – Keep a check on the coolant temperature gauge if the outside temperature is high. Distribution of weight The distribution of the weight
is very poor if your vehicle
is unladen and the trailer is
laden. Maintain a particularly low speed if you cannot avoid driving with this combina-tion. Driving speed Do not drive faster than 80 km/hour for safety reasons. This also applies for countries in which higher speeds are allowed.
The fact that the driving stability of the vehicle + trailer combination reduces with increasing speed means that the legally allowed speed should not be used when there are unfavourable road, weather or wind cond
itions, particularly near accident black
spots. You must always reduce your speed immediat
ely as soon as you detect even just the
slightest swaying
of the trailer. On no account attempt to stop the trailer from
“swaying” by accelerating. Apply the brakes in good time! If
the trailer is fitted with a
trailer brake
, apply the
brakes gently at first and then brake firmly. This will avoid brake jolts resulting from the trailer wheels locking. Shift down gears in good time before negotiating a downhill section to allow the engine to also act as a brake. Engine overheating Please keep a check on the coolant temperature gauge if you have to negotiate a lengthy slope in a low gear at a high engi
ne speed when the outside temperature is
very high
⇒page 17, “Coolant temperature gauge”.
If the needle of the coolant temperature gauge moves into the right-hand area or even the red area of the scale, reduce your speed immediately. Stop and switch off the engine if the warning light
in the instrument cluster begins flashing. Wait a few
minutes and check the level of coolant in the coolant expansion bottle
⇒page 207,
“Inspecting the coolant level”. Please refer to the following guidelines
⇒page 34, “Coolant temperature/ Coolant
quantity
”.
The coolant temperature can be reduced by switching on the heating.Any increase in the cooling effect of the coolant fan through shifting down a gear and increasing the engine speed is not possible
since the fan speed is independent of the
engine speed. One should also not drop a gear
for this reason when towing a trailer as
long as the engine can manage th
e slope without any drop in speed.
sgg.6.book Page 191 Thursday, September 24, 2009 2:32 PM
Page 194 of 271

Taking care of your vehicle and cleaning the vehicle
193
Using the system
Safety
Driving Tips
General Maintenance
Breakdown assistance
Technical Data
General MaintenanceTaking care of your vehicle and cleaning the vehicleGeneralProper care retains the value of your vehicle.Regular and proper care retains
the value
of your vehicle. It may also be one of the
requirements for the acceptance of warranty
claims relating to corrosion damage and
paint defects on the bodywork. We recommend using a preserva
tive from Škoda genuine accessories offered by your
Škoda dealer. Please follow the instructions for use on the package.
WARNING
•
Care products may be harmful to your health if not used according to the
instructions.•
Always store care products in a safe place, out of the reach of children - risk
of poisoning!
For the sake of the environment
•
Always select environmentally-friendly
products when purchasing vehicle care
products.•
Do not dispose of the packages with residues of care products in domestic waste.
Care of the exterior of vehicleWashing the vehicle Frequent washing protects your vehicle.The best protection for your vehicle agai
nst harmful environmental influences is
frequent
washing and wax treatment. How of
ten you should wash your vehicle
depends on a wide range of factors, such as:
•
Frequency of use,
•
The parking situation (garage, below trees etc.),
•
Season of the year,
•
Weather conditions,
•
Environmental influences.
The longer insect residues, bird droppings, tree sap, road and industrial dust, tar, soot particles, road salt and other aggressive deposits remain adhering to the paintwork of your vehicle, the more detrimental their destructive effect can be. High temperatures, such as those caused by intensive sun'
s rays, accentuate this caustic effect.
It may therefore be necessary, in ce
rtain circumstances, to wash the car
once a week
.
It may also be sufficient, however, to wash the car
once a month
followed by appro-
priate wax treatment. It is essential to also thoroughly wash the
underside of your vehicle
at the end of the
winter road salting and gritting period.
WARNING
When washing your vehicle in the winter
: Water and ice in the brake system can
affect the braking efficiency - risk of accident!Automatic vehicle wash systemsThe paintwork of the vehicle is sufficiently resistant that the vehicle can be washed normally in automatic vehicle wash plants
without any problem. The actual stress to
which the paintwork is subjected, however, depends greatly on the design of the vehicle wash system, the filtering of the wa
ter and the type of washing and care prod-
ucts used. If the paintwork of
your vehicle appear
s mat after being washed or even has
scratches, point this out to the operator of the vehicle wash plant. Use a different vehicle wash plant, if necessary.
sgg.6.book Page 193 Thursday, September 24, 2009 2:32 PM
Page 196 of 271

Taking care of your vehicle and cleaning the vehicle
195
Using the system
Safety
Driving Tips
General Maintenance
Breakdown assistance
Technical Data
A new layer of a high-quality
hard wax polish can be applied to the clean bodywork
after it has dried thoroughly. Even if you use a wax preserver regularly we still recom- mend that you treat the paintwork of the ve
hicle at least twice a year with hard wax.
Caution
Never apply wax to the windows.PolishingPolishing is only necessary if the paintwor
k of your vehicle has become unattractive
and if it is no longer possible to
achieve a gloss with wax preservers.
You must treat the paintwork with a wax pr
eserver if the polish you use does not
contain any preserving elements
⇒page 194.
We recommend using a preserva
tive from Škoda genuine accessories offered by your
Škoda dealer.
Caution
•
You must not treat mat painted parts or plas
tic with polishing products or hard wax.
•
Do not polish the paintwork of the vehicl
e in a dusty environment, otherwise the
paintwork can be scratched.Chrome partsFirst clean the chrome parts with a damp clot
ch and then polish them with a soft, dry
cloth. If it does not prove
to be adequate, use a chrome
care product from Škoda orig-
inal accessories.
Caution
Do not polish the chrome parts in a du
sty environment, otherwise they can be
scratched.
Paint damageSlight damage to paintwork such as scratches, scuffs or traces of chip damage must be touched up immediately with paint (Škoda painting pen)
before
any corrosion can
result. You can of course have this work ca
rried out by authorised Škoda Service Part-
ners. Specialist garages have a range of matching
touch-up pens
or spray cans
available in
the colour of your vehicle. The paint number of the original paintwork of
your vehicle is indi
cated on the vehicle
data sticker
⇒page 243.
Any corrosion which has already have formed must be removed thoroughly. Apply a corrosion protection primer
and then the paint to the affected point. You can of
course have this work carried out
by authorised Škoda Service Partners.
Plastic partsExternal plastic parts are cleaned by norm
al washing. Plastic parts and synthetic
leather can also be treated with
special solvent-free plastic cleaning agents
if a
damp cloth is not sufficient. Paint care pr
oducts are not suitable for plastic parts.
Caution
Solvent-free cleaners attack th
e material and can damage it.
WindowsOnly use a plastic ice scra
per for removing snow and ice from the windows and
mirrors. You should not move the ice scraper forward and backward but in one direc- tion on the window which you
are cleaning in order to avoid any damage to the surface
of the glass. You can best remove residues of rubber, oil,
grease, wax or silicone by using a special
window cleaner or a special silicone remover. You should also clean the windows regularly from the inside.
sgg.6.book Page 195 Thursday, September 24, 2009 2:32 PM