buttons SKODA YETI 2011 1.G / 5L Swing Car Radio Manual

●
BALANCE - setting of the volume ratio between the left and right side;
● FADER - setting of the volume ratio between the front and the rear;
● ON VOL - Your radio stores the last volume set before switching off. If the val-
ue is higher, the volume is reduced to the value of the parameter ON VOL after
switching on the radio again.
● PDC VOL - If your vehicle has been fitted with the “Parking aid (PDC)” driver's
assistant system, the volume is automatically reduced to a pre-defined value
when the “parking aid (PDC)” is active;
● GALA - the car radio will increase the volume in response to an increase in
speed (higher figures result in a steeper increase in volume);
● LOUD - in case of low volume level, this function reinforces the range of bass
and treble frequencies. Ð
Setting the special functions –
Press the menu control button 2 for a long period of time.
– Select the individual functions of the menu with the help of the station keys.
– Set the desired value using the menu control button 2 or with the help of the
station keys.
AUX
Switching on or off the functions of the external audio source.
Setting of the input sensitivity AUX LEV:
● LEV 1 - high level, used in particular for notebooks;
● LEV 2 - middle level, used for cassettes or CD player;
● LEV 3 - low level, used for MP3 player;
PHONE
If your vehicle is equipped with a handsfree system, you can switch on or off the
monophone play function of the mobile phone calls via the loudspeakers of the
vehicle.
BEEP
Switching on or off the tone signal when storing the radio stations.
ILLUM
Switch on (value 2) or switch off (value 1 ) the rear lighting of the control buttons. AF
The function alternative frequency (AF) ensures that the best receivable frequen-
cy of the selected station is automatically and precisely set. The replay of the
broadcast can be muted briefly during the search process according to the best
receivable frequency. If no alternative frequency of the set station can be found
and the station no longer offers a satisfactory quality, then please select another
station.
REG
Certain programs of the broadcasting companies are divided into regional pro-
grams at specific times. That is why in individual regions the regional programs of
a station can broadcast different contents.
First of all the unit attempts to set only alternative frequencies of the selected
station.
If the quality is however so low, that there is a risk of a

“program loss”, the unit
also accepts “related” frequencies.
● FIX - the receiver switches to a regional
“related” station, if the reception of
the current station could be interrupted;
● AUTO - the receiver can access the regional
“related” station unlimited.
BT-AUDIO
Enables a wireless transfer of MP3 data from the telephone preinstallation. Ð
Radio mode Changing the frequency band –
Press the button RADIO .
Your radio is equipped with FM and AM wavebands. They are divided in 6 memory
levels, i.e. 3 levels for FM and 3 levels for AM. There are each 6 memory spaces
available on these levels.
Activation of the FM band
Activate the FM band by pressing the RADIO button for a long time followed by
the FM 12 button. By briefly pressing the button
RADIO , you can select between
the memory levels FM1, FM2 and FM3. 4
General information