torque SUBARU TRIBECA 2009 1.G Service Owner's Manual

EB-23
Rear Gate
EXTERIOR BODY PANELS
14) Remove the rear gate hinge bolt, and remove
the rear gate panel.
15) Remove the rear gate hinge from the vehicle.
2. REAR GATE DAMPER STAY
CAUTION:
•Do not damage piston rods and oil seals.
•Never disassemble cylinders: They contain
gas.
1) Before removing the rear gate damper stay, pre-
vent the rear gate from closing using prop or the
like.
CAUTION:
If the prop comes off, operators may get injured
and vehicle may get damaged. Make sure to
support the rear gate with secure material to
prevent injury or damage.
2) Remove the mounting bolt of rear gate damper
stay.
3) Remove the mounting bolts, and remove the
damper stay.
B: INSTALLATION
1. REAR GATE PANEL
1) Install in the reverse order of removal.
2) Install with attention to make uniform clearance
between rear gate panel and body. For the dimen-
sion of clearance, refer to “SPECIFICATION” in
“General Description”. TION, General Description.>
Tightening torque:
25 N·m (2.6 kgf-m, 18.4 ft-lb)
2. REAR GATE DAMPER STAY
1) Prevent the rear gate from closing using prop or
the like.
CAUTION:
If the prop comes off, operators may get injured
and vehicle may get damaged. Make sure to
support the rear gate with secure material to
prevent injury or damage.
2) Install in the reverse order of removal.
Tightening torque:
Refer to “COMPONENT” of “General Descrip-
tion”.
NENT, General Description.>
EB-00023
EB-00281
EB-00282
EB-00283
EB-00281

EI-2
General Description
EXTERIOR/INTERIOR TRIM
1. General Description
A: COMPONENT
1. UNDER COVER
(1) Front lower coverTightening torque: N·m (kgf-m, ft-lb)
(2) Under cover T1: 7.5 (0.76, 5.4)
T2: 17.5 (1.78, 12.7)
EI-01248
T2T1
(1)
(2)

EI-3
General Description
EXTERIOR/INTERIOR TRIM
2. UNDER PROTECTOR
(1) Fuel tank protector RHTightening torque: N·m (kgf-m, ft-lb)
(2) Fuel tank protector LH T: 17.5 (1.78, 12.9)
EI-01249
T
T
T
(2)
(1)

EI-4
General Description
EXTERIOR/INTERIOR TRIM
3. FRONT BUMPER
(1) Bumper face (4) Bumper beam reinforcementTightening torque: N·m (kgf-m, ft-lb)
(2) Front upper cover (5) Fog light coverT: 33 (3.4, 24)
(3) Energy absorber foam
EI-01251
(2)
(1)
(5)
(3)
(4)
T

EI-5
General Description
EXTERIOR/INTERIOR TRIM
4. REAR BUMPER
(1) Bumper face (3) Bumper beam reinforcementTightening torque: N·m (kgf-m, ft-lb)
(2) Energy absorber foam T: 33 (3.4, 24)
EI-01250
T
T
(2)
(1)
(3)

EI-7
General Description
EXTERIOR/INTERIOR TRIM
7. ROOF SPOILER
(1) Roof spoiler (3) Washer nozzleTightening torque: N·m (kgf-m, ft-lb)
(2) High-mounted stop light T: 4.5 (0.46, 3.32)
EI-01254
T
T
T
(2)
(3)
(1)

EI-8
General Description
EXTERIOR/INTERIOR TRIM
8. ROOF MOLDING
(1) Roof molding (3) ClipTightening torque: N·m (kgf-m, ft-lb)
(2) Roof carrier attachment (4) RivetT:10 (1.0, 7.23)
EI-01255
T
T(2)
(3)
(4)
(3)
(3)
(1)
(2)

EI-11
General Description
EXTERIOR/INTERIOR TRIM
11.CONSOLE BOX
(1) Ring indicator (6) Console frame (11) Console lower lid
(2) Console front panel (7) Console rear panel (12) Lid hinge
(3) Console side panel (8) Rear A/C switch
(4) Cup holder ASSY (9) Console lower pocketTightening torque: N·m (kgf-m, ft-lb)
(5) Console pocket (10) Console upper lidT: 6.5 (0.66, 4.79)
EI-01258
T
T
(1)
(2)
(3)
(4)
(5)
(7)
(10)
(11)
(12)
(8)
(9)
(3)
(6)

EI-12
General Description
EXTERIOR/INTERIOR TRIM
12.INSTRUMENT PANEL
(1) Instrument panel upper ASSY (9)

Instrument panel lower cover
upper
(15) Console side panel upper RH
(2) Meter visor (16) Console side panel lower
(3) Center upper grille panel (10)

Instrument panel lower cover
under
(17) Glove box lid
(4) Air vent duct (18) Glove box panel
(5) Instrument panel side cover (11) Center console frame (19) Glove box lower cover
(6) Air vent side grille (12) Garnish RH
(7) Garnish LH (13) Steering support beam ASSYTightening torque: N·m (kgf-m, ft-lb)
(8) Garnish CTR (14) Console side panel upper LHT: 25 (25.5, 18)
EI-01269
TT
(2)
(5)
(1)
(8)
(6)
(19)
(11)
(12)
(15)
(17)
(5)
(6)
(3)(4)
(7)
(9)
(10)
(14)
(16)
(18)
(13)
(16)

EI-13
General Description
EXTERIOR/INTERIOR TRIM
13.SIDE TRIM
(1) Front pillar upper trim (5) Center pillar lower trim (9) Luggage floor end cover
(2) Front pillar lower trim (6) Rear door scuff plate
(3) Front door scuff plate (7) Rear quarter upper trimTightening torque: N·m (kgf-m, ft-lb)
(4) Center pillar upper trim (8) Rear quarter lower trimT: 7.5 (0.76, 5.4)
EI-01270
(10)
(7)
(8)
(1)
(2)(3)
(6)
(4)
(6)(9)
TT
T